Bone density

A scanner used to measure bone density using dual energy X-ray absorptiometry

Bone density, or bone mineral density (BMD), is the amount of bone mineral in bone tissue. The concept is of mass of mineral per volume of bone (relating to density in the physics sense), although clinically it is measured by proxy according to optical density per square centimetre of bone surface upon imaging.[1] Bone density measurement is used in clinical medicine as an indirect indicator of osteoporosis and fracture risk. It is measured by a procedure called densitometry, often performed in the radiology or nuclear medicine departments of hospitals or clinics. The measurement is painless and non-invasive and involves low radiation exposure. Measurements are most commonly made over the lumbar spine and over the upper part of the hip.[2] The forearm may be scanned if the hip and lumbar spine are not accessible.

There is a statistical association between poor bone density and higher probability of fracture. Fractures of the legs and pelvis due to falls are a significant public health problem, especially in elderly women, leading to much medical cost, inability to live independently and even risk of death.[3] Bone density measurements are used to screen people for osteoporosis risk and to identify those who might benefit from measures to improve bone strength.

Testing

Bone density tests are not recommended for people without risk factors for weak bones,[4][5] which is more likely to result in unnecessary treatment rather than discovery of a true problem.[5]

Indications for testing

The risk factors for low bone density and primary considerations for a bone density test include:

  • females age 65 or older.[5]
  • males age 70 or older.[5]
  • people over age 50 with:
    • previous bone fracture from minor trauma.[5]
    • rheumatoid arthritis.[5]
    • low body weight.[5]
    • a parent with a hip fracture.[5]
  • individuals with vertebral abnormalities.[6]
  • individuals receiving, or planning to receive, long-term glucocorticoid (steroid) therapy.[6]
  • individuals with primary hyperparathyroidism.[6]
  • individuals being monitored to assess the response or efficacy of an approved osteoporosis drug therapy.[6]
  • when androgen deprivation therapy is being planned for prostate cancer.
  • individuals with a history of eating disorders.[6]

Other considerations that are related to risk of low bone density and the need for a test include smoking habits, drinking habits, the long-term use of corticosteroid drugs, and a vitamin D deficiency.[5]

Conditions found

A bone density test may detect osteoporosis or osteopenia.[5] The usual response to either of these indications is consultation with a physician.[5]

Test result terms

Results of the test are often reported in three terms:

  • Measured areal density in g cm−2.
  • Z-score: the number of standard deviations above or below the mean for the patient's age, sex and ethnicity.
  • T-score: the number of standard deviations above or below the mean for a healthy 30-year-old adult of the same sex and ethnicity as the patient.

Types of tests

Illustration of Bone Densitometry Scan

While there are many different types of BMD tests, all are non-invasive. Most tests differ according to which bones are measured to determine the BMD result.

These tests include:

DXA is currently the most widely used, but quantitative ultrasound (QUS) has been described as a more cost-effective approach to measure bone density.[7] The DXA test works by measuring a specific bone or bones, usually the spine, hip, and wrist. The density of these bones is then compared with an average index based on age, sex, and size. The resulting comparison is used to determine the risk for fractures and the stage of osteoporosis (if any) in an individual.

Average bone mineral density = BMC / W [g/cm2]

  • BMC = bone mineral content = g/cm
  • W = width at the scanned line

Interpretation

Results are generally scored by two measures, the T-score and the Z-score. Scores indicate the amount one's bone mineral density varies from the mean. Negative scores indicate lower bone density, and positive scores indicate higher.

Less than 0.5% of patients who underwent DXA-scanning were found to have a T- or Z-score of more than +4.0, often the cause of an unusually high bone mass (HBM) and associated with mild skeletal dysplasia and the inability to float in water.[8]

T-score

The T-score is the relevant measure when screening for osteoporosis. It is the bone mineral density (BMD) at the site when compared to the young normal reference mean. It is a comparison of a patient's BMD to that of a healthy 30-year-old.[9] The US standard is to use data for a 30-year-old of the same sex and ethnicity, but the WHO recommends using data for a 30-year-old white female for everyone.[10] Values for 30-year-olds are used in post-menopausal women and men over age 50 because they better predict risk of future fracture.[11] The criteria of the World Health Organization are:[12]

  • Normal is a T-score of −1.0 or higher[13]
  • Osteopenia is defined as between −1.0 and −2.5
  • Osteoporosis is defined as −2.5 or lower, meaning a bone density that is two and a half standard deviations below the mean of a 30-year-old man/woman.
Hip fractures per 1000 patient-years[14]
WHO categoryAge 50–64Age > 64Overall
Normal5.39.46.6
Osteopenia11.419.615.7
Osteoporosis22.446.640.6

Z-score

The Z-score for bone density is the comparison to the age-matched normal and is usually used in cases of severe osteoporosis. This is the standard score or number of standard deviations a patient's BMD differs from the average BMD of their age, sex, and ethnicity. This value is used in premenopausal women, men under the age of 50, and in children and adolescents.[11][15] It is most useful when the score is less than 2 standard deviations below this normal. In this setting, it is helpful to scrutinize for coexisting illnesses or treatments that may contribute to osteoporosis such as glucocorticoid therapy, hyperparathyroidism, or alcoholism.

Prevention

To prevent low bone density it is recommended to have sufficient calcium and vitamin D.[16][17] Exercise, especially weight-bearing and resistance exercises are most effective for building bone. Weight-bearing exercise includes walking, jogging, dancing, and hiking. Resistance exercise is often accomplished through lifting weights.[18] Other therapies, such as estrogens (e.g., estradiol, conjugated estrogens), selective estrogen receptor modulators (e.g., raloxifene, bazedoxifene), and bisphosphonates (e.g., alendronic acid, risedronic acid), can also be used to improve or maintain bone density.

References

  1. Bone+Density at the US National Library of Medicine Medical Subject Headings (MeSH)
  2. Cole RE (June 2008). "Improving clinical decisions for women at risk of osteoporosis: dual-femur bone mineral density testing". J Am Osteopath Assoc. 108 (6): 289–95. PMID 18587077.
  3. "Preventing Falls and Related Fractures | NIH Osteoporosis and Related Bone Diseases National Resource Center". www.bones.nih.gov. Retrieved 2021-03-12.
  4. American Academy of Family Physicians, presented by ABIM Foundation, "Five Things Physicians and Patients Should Question" (PDF), Choosing Wisely: an initiative of the ABIM Foundation, American Academy of Family Physicians, archived from the original (PDF) on June 24, 2012, retrieved August 14, 2012
  5. 1 2 3 4 5 6 7 8 9 10 11 Consumer Reports; American Academy of Family Physicians (May 2012), "Bone-density tests: When you need them – and when you don't" (PDF), Choosing Wisely: an initiative of the ABIM Foundation, Consumer Reports, retrieved August 14, 2012
  6. 1 2 3 4 5 "Bone Mass Measurement". NOF. Archived from the original on 2008-03-07. Retrieved 2008-03-20.
  7. "Bone densitometry". Retrieved 2008-09-02.
  8. Gregson CL, Steel SA, O'Rourke KP, et al.: 'Sink or swim': an evaluation of the clinical characteristics of individuals with high bone mass. Journal Osteoporos Int./ Osteoporosis Int., 2012 Feb; 23(2): 643–654. Published online 2011 Apr 1. doi: 10.1007/s00198-011-1603-4. PMCID: PMC3261396. PMID 21455762
  9. "Bone Density Scan: MedlinePlus Medical Test". medlineplus.gov. Retrieved 2020-10-29.
  10. Unknown, Unknown (2011-07-29). "T and Z scores". University of Washington Bone Physics. Retrieved 2013-06-22.
  11. 1 2 Richmond, Bradford (2007-11-13). "Osteoporosis and bone mineral density". American College of Radiology. Archived from the original on 2008-09-17. Retrieved 2008-05-11.
  12. WHO Scientific Group on the Prevention and Management of Osteoporosis (2000 : Geneva, Switzerland) (2003). "Prevention and management of osteoporosis : report of a WHO scientific group" (pdf). Retrieved 2007-05-31.
  13. "Bone Mass Measurement: What the Numbers Mean | NIH Osteoporosis and Related Bone Diseases National Resource Center". www.bones.nih.gov. Retrieved 2021-03-12.
  14. Cranney A, Jamal SA, Tsang JF, Josse RG, Leslie WD (2007). "Low bone mineral density and fracture burden in postmenopausal women". Canadian Medical Association Journal. 177 (6): 575–80. doi:10.1503/cmaj.070234. PMC 1963365. PMID 17846439.
  15. Bachrach LK (February 2005). "Assessing bone health in children: who to test and what does it mean?". Pediatr Endocrinol Rev. 2 Suppl 3: 332–6. PMID 16456501.
  16. Lawrence, Jean. "Building Stronger Bones". WebMD. Retrieved 2020-04-20.
  17. "How to keep your bones healthy". Mayo Clinic. Retrieved 2020-04-20.
  18. "Exercise for Your Bone Health | NIH Osteoporosis and Related Bone Diseases National Resource Center". www.bones.nih.gov. Retrieved 2020-11-09.
This article is issued from Offline. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.