QF 18-pounder gun

The Ordnance QF 18-pounder,[note 3] or simply 18-pounder gun, was the standard British Empire field gun of the First World War-era. It formed the backbone of the Royal Field Artillery during the war, and was produced in large numbers. It was used by British Forces in all the main theatres, and by British troops in Russia in 1919. Its calibre (84 mm) and shell weight were greater than those of the equivalent field guns in French (75 mm) and German (77 mm) service. It was generally horse drawn until mechanisation in the 1930s.

Ordnance Quick Firing 18-pounder
Australian gun crew in action in the Ypres sector, 28 September 1917
TypeField gun
Place of originUnited Kingdom
Service history
In service1904–1940
Used byBritish Empire
Russian Empire
Irish Free State
Finland
Estonia
WarsFirst World War[1]
Third Afghan War
Russian Civil War
Irish Civil War
Waziristan 1936–37
Continuation War
Production history
DesignerArmstrong Whitworth
Vickers
Royal Arsenal
Designed1901
ManufacturerArmstrong Whitworth

Woolwich Arsenal
Royal Ordnance Factory
Vickers
Beardmore

Bethlehem Steel
Produced1903–1940
No. builtapprox. 10,469
(Mk I & II)[2]
Specifications
Mass1.282 tonnes
2,825 lb (1,281 kg)
Barrel length7 ft 8 in (2.34 m)[3]
Width6 ft 3 in (1.91 m)
Crew6[note 1]

Shell84 x 295 mm R[4]
Shell weight18.5 lb (8.4 kg) projectile

23 lb (10 kg) total including case.
Armour piercing
Smoke
Gas
Star
Incendiary
Shrapnel shell

High explosive
Calibre3.3 in (83.82 mm)
Recoil41 in (1.0 m) (Mk I – II);
26 in (0.66 m) to 48 in (1.2 m) (Mk III – V)
CarriagePole trail (Mk I & II)
box trail (Mk III & IV)
split trail (Mk V)
Elevation-5° to +16°(Mk I & II)
+30°[5] (Mk III)
+37°(Mk IV & V)[6]
Traverse4.5° left and right
(Mk I – IV)
25° left and right (Mk V)
Rate of fire20 rpm (max);[7]
4 rpm (sustained)[8][note 2]
Muzzle velocity1,615 ft/s (492 m/s)
(Mk I & II)[3]
1,615 ft/s (492 m/s)
(Mk IV)[9]
Effective firing range6,525 yd (5,966 m)
Mk I & II
7,800 yd (7,100 m)
with trail dug in
9,300 yd (8,500 m)
(Mk III, IV & V)
11,100 yd (10,100 m)
(streamlined HE Shell Mk IC)

The first versions were introduced in 1904. Later versions remained in service with British forces until early 1942. During the interwar period, the 18-pounder was developed into the early versions of the Ordnance QF 25-pounder, which would form the basis of the British artillery forces during and after the Second World War in much the same fashion as the 18-pounder had during the First.

History

During the Second Boer War, the British government realised that its field artillery was being overtaken by the more modern "quick-firing" guns of other major powers, and investigated replacements for its existing field gun, the BL 15-pounder 7 cwt. In 1900, General Sir Henry Brackenbury, the then director-general of ordnance, sent officers to visit European gun makers. At Rheinische Metallwaren und Maschinenfabrik in Düsseldorf, they found a quick firing gun designed by Heinrich Ehrhardt with a recoil system that totally absorbed all the recoil of firing, 108 guns plus spares, were secretly purchased and entered service as the Ordnance QF 15-pounder in June 1901.[10]

At the same time, the British Cabinet ordered Field Marshal Lord Roberts, the Commander-in-Chief in South Africa, to send home artillery brigade and battery commanders "selected for their eminence and experience" to form an Equipment Committee. The committee was chaired by General Sir George Marshall, who had been artillery commander in South Africa.[11] It formed in January 1901 with a wide-ranging area of study from horse-drawn mobile guns and the larger more static field guns, to harness design, and even binoculars.[12] They swiftly established the "conditions to be fulfilled by proposed new equipment"; the most important were the "weight behind the team", then ballistics, rapidity of fire, weight of shell, provision of shield and number of rounds carried.[13]

British gun manufacturers were invited to propose designs. Of the many entries, five for the horse artillery gun and three for the field gun were selected and their makers invited to submit a "specimen". These were tested in 1902, but none was found suitable for service although they all had good features. The makers were called to a conference and agreed to collaborate to produce a composite design. This used the Armstrong gun, Vickers' recoil system, and Royal Ordnance Factory's sighting and elevating gear and ammunition carrying. Reduced wheel size from 5 ft (1.5 m) to 4 ft 8 in (1.42 m) was also accepted (it had been a matter the Equipment Committee had to investigate) which saved weight. Four Artillery batteries of the composite design took part in trials of in 1903, and the new 18-pounder design was accepted.[14]

The cost of rearmament was huge, and it took some pressure from the press for the War Office to follow through. Initially the British Indian Army was re-equipped first; however, the First Moroccan Crisis changed the priorities. In the end the weapon phase-in cost £4 million (equivalent to £428 million with the GDP deflator) and became the biggest such undertaking to the date in British Army history.[15]

The 18-pounder was used on all fronts during the First World War. It remained in service during the inter-war period. Starting in 1938, carriages Marks IV and V were converted to 25-pounder Ordnance QF Mark 1 on Carriage Mark 1. 18-pounder Guns served with the British Expeditionary Force in France in the Second World War and were used in other theatres as well as for training or beach defence.

Description

Barrel construction
Breech mechanism
Recoil mechanism

The 18-pounder was a quick-firing horse-drawn field gun designed to be towed behind a limber and six horses. The gun barrel was wire-wound nickel-steel with a single-motion screw breech with a cartridge extractor. It fired a fixed round of shell and cartridge fixed together, which was known as "quick firing" in British terminology. The lower carriage comprised a single hollow steel trail fixed to the centre of the axle-tree. The limited traverse saddle supported the elevating mass and a shield. Traverse controls were on the left and elevation on the right of the saddle. Recoil was by a hydraulic buffer with telescopic running-up springs to return the barrel to its firing position.

The Equipment Committee's conditions required tangent sights (i.e. direct fire) with the option of a telescope. However, the 18-pounder entered service with rocking bar (also called "bar and drum") sights – open sights with the option of a telescope on the left and a range scale (in yards) on the right of the cradle. These arrangements also incorporated independent line of sight, meaning that the sights could remain laid on the target while the barrel was elevated or depressed. A clinometer was provided for indirect fire when the sight was aimed using a gun-arc (a refined version of the expedient devices used in South Africa) and aiming posts in line horizontally with the target.

In 1906 indirect fire goniometric sights were adopted which consisted of an alidade mounted on a circular scale graduated in degrees that was mounted on the shield. In 1910, the Number 3 Dial Sight, a refined version with a telescope and compass, replaced the goniometer. The rocking bar and telescope were retained for direct fire, as was the range scale on the right in spite of a clinometer being part of the Dial Sight mount.

In 1910, after three years of trials, the Number 7 Dial Sight was adopted. This was a very heavily modified version (notably using external instead of internal scales) of the German Goertz panoramic sight. This, with its sight mount that again included a sight clinometer, replaced the No 3. However, resolving various issues, notably with the sight and mount carrying case mounted on the shield, meant that the Number 7 sight did not enter service until early in 1914.[16]

Unusually for a 20th-century British gun, the 18-pounder retained two-man laying throughout its life, elevation (in yards) was set on a range scale on the righthand side of the cradle. The Equipment Committee had also insisted on better methods of fuze setting, important because until late in 1914 it only had time fuzed ammunition. A hand held mechanical fuze setter was developed, and in early 1914 a "fuze indicator" was introduced, this converted the range into a fuze setting.

Mk I Gun on Mk I Carriage

The original short recuperator of Mk I carriage, above the barrel. The recuperator was wound with thick rope for protection

The Ordnance Quick Firing 18-pounder Mark I gun barrel was wire-wound for one-third of its length, chosen as it was lighter, stronger and cheaper to manufacture than a fully built-up barrel.[17] A jacket was shrunk over the wire and "A" tube. The Mk I gun and Mk I carriage were accepted into service on 30 June 1904.

The narrow single-pole trail design of the Carriages Mk I and II were suited to towing by teams of horses, but constrained downward motion of the breech, and thus limited the gun's range to 6525 yards in normal use. The range could be increased to 7800 yards by "digging in" the end of the pole trail to increase elevation.[7] Its distinguishing feature was the barrel, significantly longer than the 13-pounder's and, unlike the 13-pounder, the barrel was significantly longer than the recuperator housing above it.

Mk II Gun on Mk I Carriage

The original gun design was quickly replaced in production from 1906 by the "rationalized" Mark II gun for ease of relining : the exterior of the inner "A" tube was slightly tapered, and was inserted into a matching tapered jacket by hydraulic pressure.[18]

Mark I and II guns were still in use in the post-First World War era, and some saw combat in the Far East in Second World War.

Mk II Gun on High-angle Anti-aircraft mounting

In early 1915, a number of 18-pounder guns were mounted on pedestals, with the addition of a second recuperator and retaining catch for the cartridge case at high angle, in an attempt to come up with a workable anti-aircraft gun. The gun's relatively low muzzle velocity, and the unsatisfactory ballistic characteristics of its shrapnel shell at high angles, made it a marginal performer in such a role.[19] However, by sleeving the barrel down to 3 inches (76 mm) and mating the 18-pounder cartridge with the 13-pounder's shell, the successful QF 13-pounder 9 cwt anti-aircraft gun was produced with the necessary high muzzle velocity.

The early versions of 18-pounder anti-aircraft guns remained in service, apparently only in the home defense of Britain. 35 were in service in Britain in June 1916[20] and 56 at the end of the First World War.[21] After the war, they were converted back to field gun use by removing the cartridge retaining catch.[19]

Mk II Gun on Mk I Carriage with armoured oil reservoir on recuperator

Australian 18-pounder with armoured oil reservoir at end of recuperator.

Battlefield experience in 1914 and 1915 showed up the weakness of the original recuperator springs (which returned the barrel to firing position after recoil) and loss of oil in the recuperator under intense firing. Poor quality of wartime manufacture of the springs was also a factor.[22] Spring shortages due to breakages meant guns remained in the firing line and had to be "run up" – have the barrel moved forward into its firing position – by hand, hence slowing the rate of fire.[23] A temporary preventive measure was the addition of a distinctive armoured box-shaped oil reservoir to the front end of the recuperator to maintain the oil supply and extend spring life. This modification is visible in many photographs of 18-pounders in action on the Western Front right up to the end of the war

Mk I* and II Carriage

Mk II carriage with the prominent hydro pneumatic recuperator above the barrel, Imperial War Museum London

The recuperator spring problem was rectified with the new Mk II carriage officially introduced in the field in November 1916 with a hydro-pneumatic recuperator design which replaced the recuperator springs with a system driven by air compression and could be fitted into the existing spring housing by battery officers in the field.[24] It is identified by the 10-inch (250 mm) torpedo-shaped extension on the recuperator, which made the recuperator assembly nearly as long as the barrel and hence altered the equipment profile. Converted existing carriages were designated Mk I*. The Mk II carriage also incorporated a longer cradle.[22]

In about 1917, all 18-pounders began to be fitted with a new calibrating range scale. This allowed the gun's muzzle velocity to be set on it and automatically corrected the range for the difference between the actual muzzle velocity and the standard one.

Mk III gun on High-angle Carriage

An experimental Mk III gun was developed in 1916. It had a semi-automatic horizontal sliding block breech, with the recoil mechanism below rather than above the gun barrel. The high-angle mounting may have been an experimental dual anti-aircraft and field carriage. The design did not enter service.[25]

Mk IV gun on Mk IV carriage (right), with original wooden spoked wheels, training, 1940. Ammunition limber (a converted wagon limber) is in traditional position on gun's left

Mk IV Gun on Mk III and Mk IV Carriage

Drawing of the Mk. III carriage
Studio photo of the Mk. IV gun on Mk. III carriage

Media related to QF 18 pounder Mk IV at Wikimedia Commons

A major variant (essentially, a new artillery piece with the same ballistics) was the Mark IV gun on Mk IV carriage. The Mk IV gun started testing in 1916 mounted on a new Mk III carriage with box trail, then typical for howitzers. This eliminated the original central pole trail, which had restricted elevation, allowing increased elevation to 37.5 degrees and hence increased maximum range from 6525 to 9300 yards with the 2 charge shell.

Mk III carriage was quickly superseded by Mk IV carriage as the standard field carriage.

Mk III and IV carriages incorporated a new variable-recoil hydro-pneumatic system and moved from above to below the gun barrel. The new single-motion "Asbury breech" allowed for higher rates of fire and a Welin tapered screw adopted for the breech. A single battery of the Mk IV gun on the early Mk III carriage was serving with 4th Army when the First World War ended.[26] The new gun and carriage was in effect a new weapon but as the calibre and ammunition remained the same it was referred to as part of the 18 pr development cycle until the calibre was phased out.

By 1919, the standard British field gun was the 18-pounder Mk IV gun on Mk IV carriage but Britain still possessed many of the older Marks.

An 18-pounder on an elastic mount for shipboard use (DAMS)

In addition to its land role 184 guns were converted to arm Defensively Armed Merchant Ships (DAMS) against U-boat attack during the First World War. The conversion entailed mounting the guns on the same type of elastic mount used by the QF 6-pounder Hotchkiss.[27]

Wagons and Limbers

The "carriage" limber, towed between the gun and horse team, carried 24 rounds of ammunition. Each gun was accompanied by a second horse team towing an ammunition wagon and wagon limber carrying the gun detachment (none were carried on the gun limber) and 38 rounds in each. In action, the wagon was placed close beside the gun; its steel body provided an extended shield to protect the detachments against small arms fire.

The towed weight of the gun and loaded limber was 40 cwt (2,000 kg), the wagon and its limber were about 37 cwt. Each battery also held a second wagon and wagon limber per gun, giving first line ammunition stocks of 176 rounds per gun.

Inter-War Period

Split trail of the Mk. VP carriage, ca. 1938

On 28 June 1922, Michael Collins effectively started the Irish Civil War by using two 18-pounder field guns, "borrowed" from the British Army, to bombard the Four Courts in Dublin.

The Mk V carriage with split trail entered service in 1923, it allowed 25 degrees left and right traverse without moving the trail and up to 37.5 degrees elevation. In the same year the Army began a full-scale mechanisation of the artillery: Vickers Medium Dragon tracked artillery tractors were used to tow the gun, and the horse teams began to be returned to the Army Remount Service.[28][29]

In 1925, some guns were experimentally fitted on a Medium tank chassis as self-propelled artillery (the "Birch gun"),[26] the Birch gun was used for the exercises of the Experimental Mechanized Force in 1927–1928.

The Mk IV ordnance was modified. In the Mk IVA, the A tube and wire were replaced by an autofrettaged loose liner. The Mk IVB was the same with minor modifications, most notably 3 shoulders instead of 2. A Mk V ordnance was designed but does not appear to have entered service.[30]

The gun on Mk. VP carriage with its modified armour shield on pneumatic tyres with limber towed by Morris CDSW tractor, 1938

In the 1930s, as the British Army started to fully mechanise, all guns were converted to mechanised towing. Initially, this was by fitting heavy wooden wheels with solid rubber tyres, the carriages becoming Mks IIITR, IVR and VR. Subsequently, wooden wheels were replaced by new axles, steel wheels, pneumatic tyres and modern brakes. The Mk IV and V carriages had a British conversion to produce the Mk IVP and VP on 9.00 X 16" wheels. The Mk IIs, with their pole trails, had the American 'Martin Parry' conversion to produce the Mk IIPA on 7.50 X 24" wheels. Unlike other guns, 18-pounder was not converted to Probert pattern calibrating sights.

Introduction of a new streamlined shell, Mk 1C, with a 4/7.5 crh increased maximum range to 11,100 yards with Mks III, IV and V carriages.[31]

Starting in 1938, Mk IVP and VP carriages were used for the new Ordnance QF 25-pounder Mk 1. This was a conversion from the 18-pounder Mk IV Ordnance. The calibre was increased from 84 mm to 87.6 mm by changing the liner.

Spanish service

105/30 modelo 1940 at the Historical Military Museum of Cartagena, front view

After WWI, Vickers modified 18-pounder on the Mk. IV carriage to shoot 105-mm shells; this design was license-produced as Obús Vickers de 10,5 cm. modelo 1922 (105/22) at partially Vickers-owned Sociedad Española de Construcción Naval plant; those howitzers fought on the both sides of the Spanish Civil War.[32] After the start of WWII they were modernised with a lengthened (from 22 calibres to 30 calibres) barrel featuring a counterweight at the breech and redesignated as Obús de campaña Vickers de 105/30 modelo 1940[33][34] Some 105/30 pieces (but not all) received pneumatic wheels.

Production

By the outbreak of war in 1914, 1225 guns had been produced, including 99 in India.[35] UK production was by Armstrong Whitworth, Vickers and Woolwich Ordnance factory. During the First World War, these were joined by Beardmore, the Elswick Ordnance Company and, in the US, Bethlehem Steel. In the latter part of the war, component assemblies were produced by various other companies.

Total wartime production 1914–1918 was 9908 guns and 6926 carriages.[36] Limited production of both guns and carriages continued between the wars and some carriages for use with 25-pounder Mk 1 were produced in the early part of the Second World War.

Combat use

First World War

Formal crew positions in action, 1914

Throughout the First World War, the 18-pounder was operated by the Royal Field Artillery as the standard field gun. Some Royal Horse Artillery batteries were also re-equipped with it as their 13-pounders proved unsuited to the prevalent trench warfare.

Gun team in typical traveling formation crossing the Canal du Nord, 1918

The gun and its 2-wheeled ammunition (carriage) limber were towed by a team of six vanner horses (light draught) in pairs – lead pair, centre pair, limber pair. A driver rode the left horse of each pair. The limber was hooked up to the horses and the trail of the gun was hooked up to the limber, so the total weight of the gun and trail were supported on 4 wheels. The gun detachment all rode into action either on their own horses or on the limber and wagons, led by the No. 1 (the detachment commander, a Sergeant) on his own horse.[37] In the early actions of the war, the ammunition wagon was positioned on the gun position to the left of the gun. The teams with their respective limbers, moving back from the gun position to the "wagon lines". Ammunition was passed from the wagon to the loader. As the war progressed and larger quantities of ammunition were fired, ammunition was often dumped directly onto the gun position next to the gun pits and the wagons held in the wagon lines.

Initially, British Regular Army and Canadian infantry divisions were equipped with three field artillery brigades each with three batteries of six 18-pounders (for a total of 54 per division), and a brigade of 4.5-inch howitzers. By the end of September 1914, all reserve guns (25% above the establishment entitlements as decided by the Mowat Committee in 1901) had been delivered to France, although new production orders had been placed on the outbreak of war. However, there were insufficient guns to equip brigades of New Army, Territorial Force and other Dominion divisions, so their batteries had only four guns (total 36 per division) and at Gallipoli, Australian and New Zealand divisions had fewer brigades.[38] In 1916, the decision was taken on the Western Front that all batteries should have six guns.

From February 1917, all divisions were standardised with two artillery brigades each with three batteries (named A, B and C) of six 18-pounders (total 36 per division) and one battery (D) of six 4.5-inch howitzers (total 12 per division). The remaining 18 guns from Regular divisions were transferred to Army control in Army Field Artillery Brigades, to be available for more flexible deployment.

1914

British battery coming into action in the open on the Marne, 8 September 1914. Compare with gun in pit at Second Battle of Bullecourt below

When the war began, British field guns (13-pounder and 18-pounder) were equipped solely with shrapnel shells, with an approximate 3:1 ratio of field guns to field howitzers (5-inch and 4.5-inch).

The 18-pounder shrapnel shell contained 374 small spherical bullets. A time fuze was set to initiate the shell in the air in front of the target. This blew off the shell nose and fired the bullets forward in a cone like a shotgun – they were effective up to 300 yards from the burst. For maximum effect from the cone of bullets, the angle of descent of the shell had to be flat and not plunging. At a theoretical maximum 20 rounds per minute, it could deliver 7,480 bullets per minute at a far greater range than machine guns. The gunners and officers of Regular Army field artillery batteries were expert at closely supporting the "fire and movement" tactics of the infantry with accurate shrapnel fire.

Shrapnel was effective against troops in the open, including those serving guns without gun shields. They remained effective throughout the war against opportunity targets, such as working parties. They were used for wire cutting and most importantly in the creeping barrage, where they prevented defenders from manning their trench parapets during a British assault. In this respect, they were perhaps the key element in the British artillery doctrine of neutralizing defenders during an assault instead of trying to destroy the enemy in their defences before an attack. Primacy of neutralizing defenders became the distinguishing characteristic of British artillery for the remainder of the 20th century.

The first trial high-explosive TNT rounds were fired in action on 31 October 1914 by 70th Battery, 34th Brigade RFA and 54th Battery, 39th Brigade RFA on the Ypres front and were quite successful, demonstrating both that they could destroy enemy guns and kill troops. From then on, Britain increasingly supplied 18-pounders with high-explosive shells.

A major lesson learned in 1914 was that the early British doctrine of positioning field guns in open or semi-open positions made them vulnerable to enemy artillery fire, and subsequently more use would be made of available sheltered and hidden positions for firing. This made the role of the Observing Officer crucial for 18-pounder batteries engaging targets as they could no longer rely on direct line of sight.[39] These officers suffered high casualties. It is instructive to compare the photograph of the 18-pounder gun in the open at the 1914 Battle of the Marne with that below of the gun almost hidden in a pit at the Second Battle of Bullecourt in 1917.

1915

Australian gunners in action on M'Cay's Hill, Gallipoli 19 May 1915

With Britain now attacking on the Western Front from 1915 onwards, barrages were used to neutralize defenders during an attack (first used some 15 years earlier). 18-pounder fire was also used to cut enemy barbed-wire obstacles, and high-explosive shells to inflict damage on defensive works. From 1916, light and medium mortars were increasingly used to blow aside barbed wire obstacles.

The 18-pounder continued to be used as a general-purpose light gun in other theatres, such as on Gallipoli where it was manhandled up onto the tops of steep hills such as the "400 Plateau", "Bolton's Hill" and "Russell's Top"[40] because of the lack of a modern mountain gun and shortage of field howitzers. The 18-pounder could attack lightly protected troops by destroying the parapets of trenches, small houses, and barricades. But its relatively flat high velocity trajectory meant that it could not reach an enemy sheltering out of the direct line of sight, in dips in the ground, on reverse slopes (such as the Quadrilateral east of Ginchy on the Somme) or in deep trenches or cellars. It lacked the power to demolish fortifications. However, it could neutralize defenders with HE or shrapnel.

Nevertheless, in the first 10 months of the war, 3628 18-pounders were ordered and only 530 4.5-inch Howitzers. Heavier guns were being collected from the farthest corners of the Empire and by June 1915 orders had been placed for 274 new heavy guns and howitzers from 60-pounder Gun to 15-inch Howitzer and a new 6-inch Howitzer designed. However, by June 1915 it had also become clear that Germany was reducing the proportion of field guns (to 3.5 per 1000 bayonets) and increasing that of heavier guns and howitzers (to 1.7 per 1000 bayonets), with one-third of their artillery being 15 cm or more.[41] Britain had no choice but to increase the amount of heavy artillery, but did not plan to reduce the scale of field artillery because of the need for what would later be called "close support". Nevertheless, a de facto decrease had happened due to expansion limiting field batteries to 4 guns.

British planners considered that they would need a 2:1 ratio for a successful offensive, while the French believed they needed 1:1.[42] General Farndale justified the retention of 2:1 field artillery as "Field guns were essential to attack targets close to our own troops and to play their part in the tactical plan".[43]

During 1915, 18-pounder ammunition production was equally divided between HE and shrapnel, but expenditure was mostly shrapnel, 88% in September and November.[44]

1916

British gunners at Romani, Sinai desert, 1916

Field artillery (both 18-pounder and 4.5-inch howitzer) was used successfully during the pre-Zero fire in the Battle of the Somme in late June – early July 1916, when the British heavy artillery damaged German defensive works and forced troops into the open to rebuild them they were successfully fired on with shrapnel.[45] The use of field guns to provide a covering fire barrage that neutralized the enemy during the infantry advance was used and improved during the Battle of the Somme, forcing the enemy to remain in shelters while the infantry advanced immediately behind the bursting shells – "... It is therefore of the first importance that in all cases the infantry must advance right under the field artillery barrage, which must not uncover the first objective until the infantry is within 50 yards of it".[46] The small bursting range of the shell was an advantage in this case, as advancing troops could approach close to it. The 18-pounder's role was spelled out following the Somme battles "... primarily in barrage fire, repelling attacks in the open, raking communications, wire cutting and sometimes for neutralising guns within their reach, destroying breast-works and barriers with HE and preventing repair work on defenses beyond the reach of infantry weapons".[47]

18-pounder ammunition requirements were predominantly shrapnel during 1916, although in the latter part of the year it shifted back to equality between HE and shrapnel.[44] In July 1916, standard contract prices for UK produced shells were 12 shillings and 6 pence (62.5 pence in modern terms) for HE and 18 shillings and 6 pence for shrapnel. US and Canadian prices were significantly higher. The lowest price achieved for 18-pounder HE shells was 8 shillings and 11 pence (44.8 pence) later in 1916.[48]

1917

Mk1 carriage gun in action in the open desert of lower Mesopotamia, March 1917

The January 1917 "Artillery in Offensive Operations" estimated that 18-pounders needed 7.5 shrapnel rounds + 5% HE per yard of front at medium range to cut barbed wire defences, and 20 rounds of HE to destroy trenches in enfilade. The destruction of trenches frontally was generally estimated as requiring twice the enfilade amount. It was estimated that an 18-pounder would fire 200 rounds per day in an "all-out" offensive.[49] It expressed a preference for shrapnel with a long corrector in creeping barrages due to its high number of "man-killing missiles" and its smoke cloud (shrapnel shells were designed to produce a white puff of smoke on bursting, originally as an aid to gunnery spotting). HE was viewed as not providing this necessary visual screen but could be considered for use in creeping and back-barrages in conjunction with smoke shell, but smoke shell was considered "still in its infancy".[50]

In its February 1917 Technical Notes on 18-pounder Barrages, GHQ stated shrapnel and HE barrages would normally cover to a depth of 200 yards and expressed its preference for timed shrapnel (T.S.) for creeping barrages, due partly to shrapnel directing its force forward hence being safer for those following, especially if it fell short. 50% air bursts and 50% percussion (bursting on contact) was considered optimal except on "very bad ground" where percussion rounds would mostly be wasted. HE with its lateral bursting was considered more dangerous to advancing troops (as they were assumed to be in a line abreast) than shrapnel if it burst short, but lateral bursts were considered to have less effect on the enemy as they had less "forward effect". HE with delay was difficult for advancing troops to stay close behind, as it burst 30–40 yards beyond the point of initial contact. HE without delay was assessed as effective only if it burst actually in the enemy trench. With a proper barrage program and fuze setting, timed shrapnel creeping barrage was considered optimal.[51] British regular army field gunners were already proficient in accurately timed low shrapnel bursts in 1914, as demonstrated in the early battles, but few remained by early 1917 and many gunners were relatively new recruits and inexperienced; HE had only been in use with 18-pounders for two years, so this note perhaps reflects a desire to stick with a proven method for which they could still draw on a nucleus of experts. Shrapnel appears to have been favoured for creeping barrages and a mix of shrapnel and HE for standing barrages and other tasks.

The British advance in pursuit of the German army in early 1917 as it withdrew to stronger positions on the Hindenburg Line brought a brief resumption of mobile warfare, and from the experience GHQ emphasised the need to get all light weaponry as far forward as possible to support infantry, and that "Covering fire of 18-pounders and 4.5-inch howitzers can not be too far exploited" [i.e. should be exploited as much as possible]. It also warned "There was tendency, due to trench warfare, among C.R.A.s to attempt to control individual batteries. Brigade or group commanders should be given a task and allowed to carry it out".[52]

18 pdr battery under fire near Monchy-le-Preux, Second Battle of the Scarpe, 24 April
Australian gun at Second Battle of Bullecourt. Guns had to be dug in for protection. Compare with gun in the open at the Marne above

At the opening of the Battle of Arras on 9 April 1917, the order was for 18-pounders to fire 50% HE and 50% shrapnel in the creeping barrage ahead of the advancing infantry, with one gun for every 20 yards of front. While a few commanders varied this slightly, such as Brigadier-General Tudor, CRA of 9th (Scottish) Division, who chose 75% HE and 25% smoke, the opening was notable for the first use of a coordinated fireplan across the whole front of several armies, with a common strategy linking infantry with artillery and coordinating the advance of various types of artillery. For instance, the 18-pounders were to move forward when the infantry reached their Phase 2 objective and the 60-pounders and 6-inch howitzers would move forward to take their vacated firing positions. This contrasted with the Somme, where individual Corps and Division commanders used their own fire plans and assault tactics.[53]

For the Third Battle of Ypres in July 1917, the plan was for wire cutting to be done by mortars and howitzers, "to conceal the strength of the field guns". 1,098 18-pounders, one for every 15 yards on average,[54] would include shrapnel in firing a creeping barrage starting close to the British trenches and moving forward at 100 yards in 4 minutes. Field batteries were to advance beyond no-mans land as the priority was to protect the infantry while they were "consolidating on their objectives" (i.e. gaining and holding new advanced positions).[55]

In the opening barrage for the first phase on 31 July, the Battle of Pilckem Ridge, 2/3s of the 18-pounders fired in the creeping barrage at four rounds per minute and 1/3 fired in the standing barrage on the German second line.[56] The barrage was generally successful; but as the weather deteriorated, tracks turned to mud and shell holes filled with water, it became nearly impossible for guns to advance in support of the infantry as planned.[57]

For the opening barrage at the Battle of Menin Road on 20 September, the ratio of medium/heavy artillery to field artillery reached 1 : 1.5 for the first time, reflecting more heavy guns rather than fewer field guns. 18-pounders were to fire 50%-50% shrapnel and HE with 25% of the HE fuzes set to delay.[58] Hence the previous doubts about HE appear to have been overcome, and for the lifting barrage for the Battle of Cambrai on 20 November (this was chosen rather than a creeping barrage) the 18-pounders were to fire equal proportions of shrapnel, HE and smoke, with the precise smoke usage depending on weather conditions at the time.[59]

A total of 47,992,000 18-pounder rounds were manufactured in 1917 and 38,068,000 were fired,[60] (38% of its total for the whole war) indicating the extent to which the artillery war escalated in 1917. 18-pounder ammunition requirements in 1917 were generally equal quantities of shrapnel and HE.[44]

1918

18-pounders were used effectively in the spring of 1918 against attacking German troops during their Spring Offensive. However, the effectiveness of the German fire plan on 21 March caused many casualties amongst the gunners, and in too many cases batteries were unable to withdraw before being overrun. Nevertheless, on 4 April, the Germans made their final attempt to break the British line having advanced to the area of Villers Bretonneux held by 14th (Light) and 18th (Eastern) Divisions, reinforced by the 16th (Irish) and 39th divisional artilleries although batteries were understrength through losses. By mid-morning, observers were engaging massed German infantry but these pressed forward and reached just east of Hamel. Brigadier-General Edward Harding-Newman, CRA of 14th (Light) Division issued the following order "This attack must and can be stopped by artillery fire. If any battery can no longer effectively stop the enemy from its present position, it will at once move forward to a position on the crest, to engage the enemy over open sights. It is essential that the artillery hold the line and they will do so." Fire from several RFA brigades, mostly with 18-pounder batteries, stopped the German advance, including some from 16th (Irish) Division that deployed forward to the crest and observers from the 177th Brigade RFA using Hamel church tower. This action effectively ended the German advance.[61]

For the successful British attack at the Battle of Amiens on 4 July, there was one 18-pounder per 25 yards of front, supplemented by machine guns, and they fired a barrage of 60% shrapnel, 30% HE and 10% smoke 200 yards ahead of the advancing troops.[62]

In the first half of 1918, 18-pounder ammunition requirements were predominantly (about 60%) shrapnel, moving back to equality between shrapnel and HE in the final months of the war. Chemical and smoke shells were each around 5% of the total.[44]

By the end of the war, the modern "empty battlefield" was evolving, with troops learning to avoid open spaces, and the light field gun was becoming obsolete, with an increasing use of light machine guns, light mortars and field howitzers which, with their high trajectory, were able to drop shells onto even deeply sheltered enemy troops on reverse slopes that field guns could not reach. The 18-pounder Mk IV, with its box trail which allowed it to fire in a high trajectory, had begun its evolution into the more versatile 25-pounder gun-howitzer.

At the Armistice, there were 3,162 18-pounders in service on the Western Front, which had fired approximately 99,397,670 rounds,[44] and 800 guns in Egypt, Russia and on other fronts.[63]

Between The Wars

After the Armistice in 1918, some British and Canadian 18-pounders, including a battery transported portee, were in the British Army of the Rhine in the Rhineland. It also served with British and Canadian forces in North Russia in 1918–1919 and with the Canadian Siberian Expeditionary Force.[64][65]

In 1919, it served with the 7th, 16th, 21st and 217th Brigades R.F.A. in the Third Afghan War,[66] in operations in Mesopotamia 1920–21, and Waziristan 1936–37.[64]

Second World War

An 18-pounder Mk. IIPA gun being inspected by General Georges at Orchies in April 1940

During the Second World War, the 18-pounder was used mainly by Territorial Army regiments in the British Expeditionary Force. Some Regular units were also equipped with them, including K (Hondeghem) Battery, which won its battle honour with them. A total of 216 guns were lost in the 1940 campaign. This left the British Army with 126 guns in UK and 130 in the rest of the world, according to a stocktake in July 1940.

It was also used by British and other Commonwealth units in the East African campaign,[67][68] and the North African campaign.

During the war against Japan (from December 1941), the 18-pdr was used in the Malayan campaign (by a number of British field regiments) and, to a lesser degree, the Battle of Hong Kong (by 965 Beach Defence Battery).[69] At the Battle of Kota Bharu (Malaya) some of the first shots of the Pacific War were fired by an Indian Army 18-pounder. Most, if not all, of these guns were lost as a result of the defeat of Commonwealth forces and the capture of Hong Kong and Singapore.

From 1942, the 25-pdr replaced the 18-pdr for British and Indian forces in the Burma campaign.

Irish Service

The 18-pounder was introduced to the Irish National Army in 1922 on the foundation of the state. It was first used by National Army Gunners to bombard the Four Courts in Dublin from 28 June 1922, as part of the Battle of Dublin. The departing British Forces were criticised for the lack of training that they had imparted to the gunners of the infant Irish artillery corps, and for providing shells intended to destroy barbed wire rather than the normal HE shells. The marks of the shell fire can still be seen on the walls of the Four Courts. The 18-pounder played an important role throughout the Irish Civil War, being instrumental in the fighting in Munster alongside the Rolls-Royce Armoured Car. The nine 18-pounder guns were used in the infantry support role until grouped together to form an artillery corps in March 1923.

With the establishment of the Defence Forces in 1924, the 18-pounder was the only artillery weapon in Irish service, forming the 1st and 2nd Field Batteries of the Artillery Corps. By the following year, twenty five 18-pounder guns were on hand and three more were delivered in 1933. Additional equipment received by the army in 1941 included four 18-pounder guns. The regular army's field batteries re-equipped with the 25-pounder in 1949 but thirty seven 18-pounder guns were still in use with the reserve FCA. The guns remained in FCA service until the late 1970s, when they were replaced by the 25-pounder and 120 mm mortars.

Some examples remain preserved, including several in Collins Barracks, Cork, in McKee Barracks, Dublin and two Mk IV guns in Aiken Barracks, Dundalk.

Finnish Service

In 1940 Britain sold 30 Mk 2 guns on Mk 2PA carriages to Finland during the Winter War, but they arrived too late to be used during that combat. They were used as "84 K/18" during the Continuation War by Field Artillery Regiment 8, 17th Division. They were modified by the Finns who fitted a large muzzle brake and a much improved sighting system. For use in deep snow a second set of 610 millimetres (24 in) wheels were fitted.[70]

Extended specification

Australian gun firing, showing the long recoil of Mk2 carriage, Passchendaele October 1917
  • Gun
    • Length: 9 ft 6 in (2.90 m)
    • weight: 9 cwt
    • Rifling: 18 grooves (Mks I, II, IV)
    • Twist: 1 in 30 (Mks I, II, IV)
    • Barrel Life: 12,000 to 15,000 rounds
  • Carriage
    • weight: 24 cwt (Mk V 27 cwt)
    • Width: 6 ft 3 in (1.91 m)
    • recoil: 41 inches fixed (carriage Mk I, II); 26 – 48 inches variable (carriage Mk IV, Mk V)
    • Elevation: -5° to +16° (carriage Mk I & II with pole trail), +30° (carriage Mk III box trail), +37°

(carriage Mk IV box trail & Mk V split trail)

    • Traverse: 4.5° left and right (Carriage Mk I – IV); 25° left and right (carriage Mk V)
    • Gunshield: proof against shrapnel and rifle fire (500 yds)
  • Limber
    • Capacity: 24 shells
    • weight: 14 cwt

First World War Ammunition

18-pounder ammunition was a fixed round (i.e. the shell and brass cartridge case were loaded as a single unit, much like a large rifle cartridge), and fitted with a nose fuze. The normal service round was "Full Charge", a "Reduced Charge" round was available for training. Double base propellant (nitroglycerine and nitrocellulose) was used, Cordite Mark 1 was the standard propellant when the gun was first introduced into service. By 1914, this cordite had been replaced by Cordite MD. During the First World War this was replaced by a revised formulation that was easier to produce called Cordite RDB.[71]

Until September 1914, the only 18-pounder issued shell was shrapnel, fitted with a No. 80 "Time & Percussion" fuze (based on a Krupp design). The timer was set to open the shell and fire the bullets forward before it hit the ground. No 80 Fuze was an igniferous type of time fuze (as were most First World War time fuzes), meaning that it burnt gunpowder at a known rate to give a time from firing to fuze functioning. The shell did not burst, but projected spherical lead-antimony bullets forward in a cone, these bullets were effective up to 300 yards from the burst. 18-pounder carried 374 of the 41/pound size bullets. The fuze was designed to function as close as 50 yards from the muzzle if required, in order to eliminate the need for case shot. Observing shrapnel bursts was difficult and, after many experiments, gunpowder pellets were added to the tube between the fuze and the gunpowder ejecting charge in the base of the shell in order to emit a puff of smoke, this had the added advantage of widening the cone of the bullet spread.

A star shell with a time fuze (No 25) had been developed and small stocks were held before the war but it was not routine issue.

Pre-war experiments with 18-pounder HE shells had been inconclusive in terms of their benefits. However, the first month of the war showed that they were worth having and the first HE rounds arrived in September 1914. This was a different shape to the existing shrapnel shell so a new Mark 2 shrapnel shell was introduced to ensure ballistic compatibility. The original shrapnel shells had a relatively blunt ogive – 1.5 circular radius head (crh), the newer ones were 2 crh.

In 1914, the standard HE used by UK artillery was Lyddite, a formulation based on picric acid, this was a powerful explosive but expensive. TNT was introduced, but this too was expensive, particularly in its pure form required for shells so eventually Amatol was adopted. This was a mixture of ammonium nitrate and lower quality TNT, various proportions were used but eventually 80% ammonium nitrate and 20% TNT became standard. The parallel inside walls of the shell made it suitable for filling using pre-formed blocks of explosive as well as pouring.[72]

Other types of shell were also introduced, although not as extensively as they were for howitzers and heavier guns. White phosphorus smoke shells became available in small quantities in 1916, and in 1918 chemical and incendiary shells were provided. The latter was a shrapnel type shell using thermite pellets, although a black powder incendiary shell for AA use against Zeppelins was introduced in 1916.[73]

Diagram showing dimensions of Mk II HE shell, First World War
First World War high-explosive shell, from the Imperial War Museum collection.[74]
This shell does not have the red band around the neck, indicating it has not been filled
First World War high explosive fixed round from the Imperial War Museum collection.[75]
The red band indicates it has been filled. The green band indicates it is filled with amatol or trotyl (in British use TNT was known as Trotyl). HE filling was initially pure TNT (1914), later TNT/Amatol mixture.[76]
Filling weight 13 oz (368 gm)
Propellant weight 1 lb 8.8 oz (694 gm) Cordite[77]
Total round Length 21.75 inches
First World War Mk VI Shrapnel shell diagram
Sectioned First World War shrapnel round on display at Canadian War Museum, Ottawa
375 balls, lead antimony, 41 balls to pound[78]
World War I shrapnel fixed round on display at Canadian War Museum, Ottawa
Propellant weight 1 lb 6.9 oz (650 gm) Cordite[77]
Length 21.75 inches

Second World War Ammunition

18-pounder rounds in British service in 1939. 'Reduced' means a reduced propelling charge. Older rounds were also available. Fuze No 115 was a streamlined version of No 106. Armour-piercing shell had a base fuze, No 12

After the First World War, the variety of ammunition was reduced, although an armour piercing HE shell was developed. The main change was introduction of a new streamlined HE shell, 4/7.5 crh, giving a significant improvement in range. In the 1930s, the new generation of double base propellant, Cordite W, was also adopted.

See also

Surviving examples

Mk2 gun on Mk 2R carriage at the South African National Museum of Military History

Notes

  1. 6 men operated the gun in action. Another 4 were responsible for ammunition supply, and they were usually based behind the gun lines, only meeting the gun crew when they went forward with ammunition. Hence the full complement was 10 men.
  2. This limitation appears to have been an inevitable result of the new warfare rather than reflecting any inherent design flaw in the 18-pounder, as German staff were coming to the same conclusions with their own guns : "The guns' greatest enemy is... our own rapid fire... no gun barrel can resist a too prolonged barrage fire. Barrage fire must be rapid, but it must only last a few minutes; it should not be recommenced except in a case of need". "Instructions – Artillery Fighting on the Somme – Part II"
  3. British military traditionally denoted smaller ordnance by the weight of its standard projectile, in this case approximately 18 pounds (8.2 kg)

References

  1. Smith, Colin (2006). Singapore Burning. Penguin. p. 132. ISBN 978-0-14-101036-6.
  2. Clarke, pg. 33
  3. Hogg & Thurston, pg. 81
  4. "78- MM CALIBRE CARTRIDGES". www.quarryhs.co.uk. Retrieved 5 September 2017.
  5. Hogg & Thurston, pg. 83
  6. Hall December 1973
  7. Farndale 1986, pg. 1
  8. Farndale 1986, pg. 159. Following the experience of the Battle of the Somme the 18-pounder was limited from January 1917 to 4 rounds per minute, as the barrel and recoil mechanism could not stand more. "And this rate should only be maintained for short periods" : "Artillery in Offensive Operations", 11. Rate of Fire and Depth of Lifts.
  9. Major D Hall, December 1973 quotes 1,640 ft/s (500 m/s)
    for Mk IV. Hogg & Thurston quote 1615. Other sources quote 1625 and 1632. Maximum muzzle velocity of Mk IV was apparently fractionally higher than Mk II, and appears to have been related to usage of more modern ammunition post-WWI.
  10. Headlam, p.13
  11. Headlam, p. 73
  12. Headlam, Appendix B
  13. Headlam, Appendix C
  14. Headlam, pp. 73–74
  15. David Stevenson. "The field artillery revolution and the European military balance, 1890-1914" (PDF). Eprints.lse.ac.uk. Retrieved 22 July 2022.
  16. Headlam, p. 97 and 105
  17. Hall, June 1973
  18. Pages 5 & 6 in "Handbook of the 18-PR. Q.F. GUN – Land Service", 1913
  19. Hogg & Thurston, p.84
  20. Farndale 1986, p.397
  21. Routledge, p.27
  22. Hogg & Thurston, p.80
  23. Farndale 1986, p.135
  24. Hogg & Thurston, p.80. They state that the modification was actually being made "some time before this".
  25. Hogg & Thurston, p.86
  26. Clarke, p.39
  27. Friedman, Norman (2011). Naval weapons of World War One. S. Yorkshire: Seaforth Pub. p. 108. ISBN 978-1-84832-100-7. OCLC 751804655.
  28. "Motorizing English Field Artillery". Journal of the United States Artillery. (Reprinted from the United Service Gazette, December 29, 1921). Artillery School Press. 56: 241. 1922.
  29. French, David (June 2001). "Doctrine and Organization in the British Army, 1919-1932". The Historical Journal. Cambridge University Press. 44 (2): 510. doi:10.1017/S0018246X01001868. JSTOR 3133617. S2CID 43202707.
  30. Range Table for Ordnance QF, 18-pr Mks I to V 2CRH Shrapnel, 4/7.5 CRH HE, 1929
  31. Range Table for Ordnance QF, 18-pr Mks I to IV 2CRH Shrapnel, 4/7.5 CRH HE, 1929
  32. "Obus Vickers 105/22". Amonio.es.
  33. "Spanish Army". Ejercito.defensa.gob.es.
  34. Meliá, Juan Tous (2000). Guía Histórica del Museo Militar Regional de Canarias. ISBN 9788478237524.
  35. Hogg
  36. The Official History of the Ministry of Munitions, Volume X, The Supply of Munitions, Part 1 Guns
  37. Clarke, pg. 46
  38. David Horner, "The Gunners – A History of Australian Artillery", 1995, Chapter 5
  39. Farndale 1986, pg. 332
  40. CEW Bean describes this in detail in "THE OFFICIAL HISTORY OF AUSTRALIA IN THE WAR OF 1914–1918 Volume II" Chapter 3. 11th Edition, published by Angus & Robertson, Sydney, 1941
  41. Official History of the Ministry of Munitions Volume X Part I pg 7
  42. Farndale 1986, pg. 116
  43. Farndale 1986, pg. 333
  44. Official History of the Ministry of Munitions Volume X Part II Gun Ammunition: General
  45. Farndale 1986, pg. 144
  46. Farndale 1986, pg/ 150. Quoting MGRA Fourth Army Major-General Birch's memorandum during the battle.
  47. Farndale 1986, pg. 158. Quoting War Office Artillery Notes No. 4 – Artillery in Offensive Operations, January 1917.
  48. Official History of the Ministry of Munitions Volume X Part III Gun Ammunition: Shell Manufacture
  49. "Artillery in Offensive Operations", Appendix IV, January 1917
  50. "Artillery in Offensive Operations", 13. Ammunition for the Field Artillery Barrage, January 1917
  51. Technical notes on 18-pounder Barrages. February 1917.
  52. Additional Points Brought Out in Open Fighting up to 7 April 1917.
  53. Farndale 1986, pg. 166, 171-172
  54. Farndale 1986, pg. 199
  55. Farndale 1986, pg. 197. Quoting the plan issued by Major-General Uniacke, MGRA 5th Army on 30 June 1917.
  56. Farndale 1986, pg. 201
  57. Farndale 1986, pg. 203
  58. Farndale 1986, pg. 205-206
  59. Farndale 1986, pg. 219
  60. Farndale 1986, pg. 206
  61. Farndale 1986, pg. 277-279
  62. Farndale 1986, pg. 284
  63. "Statistics of the military effort of the British Empire during the Great War : 1914-1920 / The War office, March, 1922".
  64. Hughes
  65. Colonel G. W. L. Nicholson, The Gunners of Canada – The History of the Royal Regiment of Canadian Artillery, Volume 1 1534–1919, 1967
  66. General Staff Branch, Army HQ India, "The Third Afghan War 1919 Official Account", 1926
  67. Farndale 1996
  68. Northling, Commandant CJ, Ultima Ratio Regum – Artillery History of South Africa, 1987
  69. Farndale 2002
  70. "FINNISH ARMY 1918 - 1945: ARTILLERY PART 3". Jaegerplatoon.net. Retrieved 22 July 2022.
  71. Official History of the Ministry of Munitions, Volume X The Supply of Munitions, Part IV Gun Ammunition: Explosives
  72. Official History of the Ministry of Munitions, Volume X The Supply of Munitions, Part II Gun Ammunition: General
  73. Official History of the Ministry of Munitions, Volume X The Supply of Munitions, Part III Gun Ammunition: Shell Manufacture
  74. Imperial War Museum. "Shell 18pdr HE (MUN 546)". IWM Collections Search. Retrieved 8 March 2013.
  75. Imperial War Museum. "18pdr HE Fixed Round (MUN 500)". IWM Collections Search. Retrieved 8 March 2013.
  76. Clarke 2004, page 17
  77. Hogg & Thurston 1972, page 240
  78. 375 balls, 41/lb is for Shrapnel shells Mk II and later. "Treatise on Ammunition" 10th edition. War Office, 1915.
  79. Imperial War Museum (2013). "18 pdr QF Gun Mk II, Pattern 1904 (ORD 104)". IWM Collections Search. Retrieved 10 March 2013.

Bibliography

  • Handbook of the 18-PR. Q.F. GUN – Land Service 1913
  • "History of the Ministry of Munitions", 1922. Volume X : The Supply of Munitions. Facsimile reprint by Imperial War Museum and Naval & Military Press, 2008. ISBN 1-84734-884-X
  • Dale Clarke, "British Artillery 1914–1919. Field Army Artillery.", Osprey Publishing, 2004, ISBN 1-84176-688-7
  • General Sir Martin Farndale, History of the Royal Regiment of Artillery. Western Front 1914–18. London: Royal Artillery Institution, 1986. ISBN 1-870114-00-0
  • General Sir Martin Farndale, The History of the Royal Regiment of Artillery – The Years of Defeat 1939–41, 1996.
  • General Sir Martin Farndale, "The History of the Royal Regiment of Artillery – The Far East Theatre 1941-45", 2002.
  • Major-General Sir John Headlam, "The History of the Royal Artillery – from the Indian Mutiny to the Great War", Volume II (1899–1914), Royal Artillery Institution (Woolwich), 1937. Facsimile reprint by Naval & Military Press, 2005. ISBN 978-1-84574-043-6
  • Ian Hogg & L.F. Thurston, "British Artillery Weapons & Ammunition 1914 – 1918", Ian Allan, 1972
  • Ian Hogg, "Allied Artillery of World War One", 1998, ISBN 1-86126-104-7
  • Major General B.P. Hughes, "The History of the Royal Regiment of Artillery – Between the Wars 1919-39", 1992, ISBN 0-08-040984-9
  • Brigadier N.W. Routledge, "History of the Royal Regiment of Artillery. Anti-Aircraft Artillery, 1914-55", Brassey's, 1994, ISBN 1-85753-099-3

Further reading

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.