3D Robotics

3DR is an American company located in Berkeley, California [1] that produces enterprise drone software for construction, engineering and mining firms, as well as government agencies. [2]

3DR Robotics
IndustryDrone software
Founded2009 (2009)
FoundersChris Anderson, Jordi Muñoz
HeadquartersBerkeley, California
ProductsDrone software, drone data analytics
BrandsSite Scan
Number of employees
70+
Website3dr.com

Prior to 2016, the company designed and marketed commercial and recreational unmanned aerial vehicles including consumer drones, ready-to-fly quadcopters for aerial photography and mapping, and fixed-wing UAVs based on the Ardupilot platform. However, as of September 2016, 3DR and the major open source Ardupilot development community separated due to disagreements over the license of the open source code on which 3DR products are based.[3]

The company was co-founded as 3D Robotics in 2009 by author and entrepreneur Chris Anderson and Mexican engineer Jordi Muñoz.[4] The pair met online through the DIY Drones community, which Anderson originally started for aerial vehicle enthusiasts.[5]

Products of 3DR

Below is a list of products released by 3DR.

Solo Drone. Released in May 2015 and marketed to the consumer and professional aerial photography market. It is powered by two computers and designed specifically for the GoPro Hero camera. The stated aim of the SOLO drone is the ease of both flying the drone and taking professional aerial photos and videos.[6]

Chris Anderson (left), co-founder and CEO of 3D Robotics

IRIS+ Drone. Released in September 2014, it was designed for the recreational drone market. With an additional GoPro camera, it has the capability to capture aerial photos and videos. This UAV comes ready to fly. It can travel at 40 miles per hour and reach distances of up to 3,280 feet.[7]

X8 Quadcopter. Released in November 2014, the X8 quadcopter has a modular design and comes in 2 versions. The X8+, with a built-in gimbal and GoPro camera is aimed at aerial photography and cinematography. The X8-M quadcopter is intended for mapping applications. Both X8 versions feature waypoint navigation technology.[8]

AERO-M Fixed Wing UAV. Released in November 2014, the Aero-M is fully automated, and has a mapping platform that creates georeferenced and orthorectified mosaics. This fixed wing drone has an estimated flight time of up to 40 minutes, and is able to photograph an area of up to 250 acres per flight. The Pix4D software allows for the creation of georeferenced, photogrammetry and orthorectified mosaics from the images. The Aero-M UAV is intended to benefit conservation efforts and industries such as farming and construction, through the creation of geo-referenced maps.[9]

As of March 2016, 3DR announced that they would no longer be manufacturing drones. In response to the company ceasing to produce hardware, a former employee, interviewed in Forbes magazine in 2016, is quoted as saying "3DR was a $100 million blunder based on ineptitude."[2]

Flight controllers

In addition to its Site Scan platform, 3DR makes professional flight controllers which are intended for multi-rotor stabilization control of various platforms or heavy payloads in aerial photography, mapping, and personal enjoyment. In addition to the main Pixhawk flight controller model, there is also the less robust APM 2.6 model. Pixhawk is an autopilot system designed by the PX4 open-hardware project and manufactured by 3DR. It features processor and sensor technology from ST Microelectronics and a NuttX real-time operating system. The APM 2.6 is an open source autopilot system. It allows the user to turn fixed rotary wing or multirotor vehicles, including cars and boats, into fully autonomous vehicles capable of performing programmed GPS missions with waypoints.

Dronecode

3DR is a founding member of the Dronecode[10] Consortium, a non-profit organization governed by the Linux Foundation. The Consortium was formed in 2014 with the goal of using open source Linux for the benefit of users with affordable and more reliable UAV software.[11] Other notable members are Intel, Qualcomm, Parrot SA and Walkera.[12][13]

References
  1. "3D Robotics - About Us". Archived from the original on 2014-11-18. Retrieved 2014-11-18.
  2. "Behind the Crash of 3D Robotics, North America's Most Promising Drone Company". Forbes.
  3. "ArduPilot and DroneCode part ways". 9 September 2016.
  4. "A Hot-Shot Magazine Editor And A Tijuana Teenager Met Online And Made $5 Million Building Drones". Business Insider. Retrieved December 12, 2014.
  5. "Jordi Muñoz Wants You to Have a Drone of Your Own". Business Insider. Retrieved February 1, 2013.
  6. "3D Robotics New Solo Drone Promises Hollywood Quality Photos". NBC News. Retrieved April 13, 2015.
  7. "What You Should Know About the Iris+ Quadcopter". National Geographic Voices. Retrieved March 19, 2015.
  8. "X8 Quadcopter For Aerial Photography And Mapping". DroneZon.com. 28 February 2015. Retrieved February 28, 2015.
  9. "3DR Aero-M Drone For Visual Spectrum Aerial Maps". BHPhotovideo.com. Retrieved November 14, 2014.
  10. "Dronecode Project". Dronecode. Archived from the original on December 3, 2018. Retrieved October 13, 2014.
  11. "Linux bids for UAV World Domination". theregister.co.uk. Retrieved June 29, 2015.
  12. "Dronecode Sponsors". Dronecode.org. Retrieved October 10, 2014.
  13. "Open Source Dronecode Project Attracts New Investment and Members". Dronecode.org. Archived from the original on June 29, 2015. Retrieved June 29, 2015.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.