7mm Penna

The 7mm Penna, also known as the 7×23mm is a handgun cartridge designed by Leonardo Penna for law enforcement applications.[1][2] The cartridge utilises a novel lightweight, pointed projectile made from brass travelling at high velocity with the intention of giving it limited armor-piercing capabilities and greater stopping power.[1]

7mm Penna
TypeHandgun
Place of originItaly
Production history
DesignerLeonardo Penna
Designed2004
Specifications
Parent caseFN 5.7×28mm
Case typeRimless, straight
Bullet diameter7.04 mm (0.277 in)
Neck diameter7.9 mm (0.31 in)
Base diameter7.95 mm (0.313 in)
Rim diameter7.95 mm (0.313 in)
Rim thickness1.2 mm (0.047 in)
Case length23 mm (0.91 in)
Overall length34.5 mm (1.36 in)
Primer typeSmall pistol
Maximum pressure (C.I.P.)250 MPa (36,000 psi)
Ballistic performance
Bullet mass/type Velocity Energy
4.5 g (69 gr) 405 m/s (1,330 ft/s) 367 J (271 ft⋅lbf)
3.2 g (49 gr) 480 m/s (1,600 ft/s) 378 J (279 ft⋅lbf)

There has been rumours of Fiocchi of Italy developing this cartridge for the sport of competitive shooting especially for IPSC competitions. STI chambered a few of their Nemesis line of 1911 clones for this cartridge but ceased shortly thereafter due to very little demand for such a handgun in this chambering.

This cartridge family also includes a 7x28mmR rimmed cartridge designed for use in revolvers and longer cartridges for use in carbines and rifles.[3]

See also

References

  1. Penna, Leonardo. "7penna ammunition". Q.S. Progetto Meccanica s.a.s. Archived from the original on 13 August 2013. Retrieved 9 July 2013.
  2. "Tab IV - Pistol and revolver cartridges". C.I.P. Archived from the original on 15 October 2013. Retrieved 9 July 2013.
  3. "Forum post". thefiringline. thefiringline. Retrieved 9 July 2013.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.