AVCEN Jetpod

The AVCEN Jetpod was a design proposal for a very quiet aircraft that could take off and land in short distances (STOL), developed by Avcen Limited, a company incorporated on 18 October 1988 which became a subsidiary of the Hong Kong-based company, Profit Sky Group Ltd.[1]

A number of applications were proposed, including as a military transport, an executive transport, and as a short to medium-range air taxi. Avcen Limited was the British-based headquarters while Avcen Limited Malaysia was based at Patimas Technology Centre, Technology Park, Bukit Jalil, Kuala Lumpur.[2] According to Avcen's publicity materials, the Jetpod's maximum speed was designed to be 550 km/h (340 mph; 300 kn). It would need only 125 metres (137 yards) to take-off or land, allowing runways to be constructed close to the center of major cities, and would be sufficiently quiet to not be noticeable above city traffic.

On 16 August 2009, a just-completed prototype Jetpod crashed, killing the founder of Avcen, Michael Robert Dacre, who was the sole occupant. Dacre had attempted to take off three times and on the fourth successfully lifted off before stalling and crashing.[3][4] According to Taiping deputy police chief Syed A. Wahab Syed A. Majid, the company had not obtained permission from the Royal Malaysian Air Force to conduct the flight tests.[5]

References
  1. "Avcen Limited on Duedil".
  2. Inventor killed in Jetpod crash, The Star, 17 August 2009. Retrieved: 18 October 2009
  3. British aviation pioneer dies after prototype crashes in Malaysia, The Times, 17 August 2009. Retrieved: 18 October 2009
  4. Flying taxi crashes on test flight, killing its UK inventor (Update 2), The Star, 16 August 2009. Retrieved: 18 October 2009
  5. Pesawat terhempas, juruterbang maut Archived 24 February 2012 at the Wayback Machine, Utusan Malaysia (In Malay), 17 August 2009. Retrieved: 18 October 2009
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.