Atomic vapor laser isotope separation

Atomic vapor laser isotope separation, or AVLIS, is a method by which specially tuned lasers are used to separate isotopes of uranium using selective ionization of hyperfine transitions.[1][2] A similar technology, using molecules instead of atoms, is molecular laser isotope separation (MLIS).

"AVLIS" redirects here. For the Dungeons & Dragons campaign setting, see Avlis.
An atomic vapor laser isotope separation experiment at LLNL. The green light is from a copper vapor pump laser used to pump a highly tuned dye laser which is producing the orange light.

Natural uranium consists of a large mass of 238U and a much smaller mass of fissile 235U. Traditionally, the 235U is separated from the mass by dissolving it in acid to produce uranium hexafluoride and then using gas centrifuges to separate the isotopes. Each trip through the centrifuge "enriches" the amount of 235U and leaves behind depleted uranium. In contrast, AVLIS produces much higher enrichment in a single step without the need to mix it with acid. The technology could, in principle, also be used for isotope separation of other elements, which is uneconomic outside specialist applications with current non-laser-based technologies for most elements.

As the process does not require the feedstock to be chemically processed before enrichment, it is also suitable for use with used nuclear fuel from light water reactors and other nuclear waste. At present, extracting 235
U from those sources is only economical up to a degree, leaving tons of 235
U still contained in waste products. AVLIS may offer an economic way to reprocess even the fuel that has undergone one cycle of reprocessing using existing methods.[3]

Due to the possibility of achieving much higher enrichment with much lower energy needs than conventional centrifuge based methods of uranium enrichment, AVLIS is a concern for nuclear proliferation. To date, no commercial-scale AVLIS production line is known to be in use.

Principle

The basic concept behind the AVLIS system is to selectively ionize the desired atoms in a vaporized source material. As the energy levels of the electrons are affected by the nuclear structure, causing the hyperfine structure, different isotopes have different energy levels. The designers pick a particular electron energy where the difference between isotopes is maximized and the energy level can be practically produced with a laser. The laser light causes the chosen electron to be photoexcited and thus ionize the atom, leaving it electrically charged. The ion can then be manipulated with electrostatic or magnetic fields. Other isotopes, which subtly different energy levels, will not be ionized and remain in the original mix.

The choice of target electron has changed during the development of AVLIS as newer laser technologies have been developed. Early work generally focused on electrons in the 16 micron band, which could be efficiently produced using CO2 lasers which were emerging in the late 1960s. However, the transitions in this area were closely spaced which made it difficult to select due to Doppler broadening, requiring the vapor to be cooled with a complex expansion system. The introduction of lasers working at tunable frequencies, typically dye lasers, allowed the selection of more convenient excitations. Modern systems typically use the 238U absorption peak of 502.74 nanometers shifts to 502.73 nm in 235U.

The AVLIS system consists of a vaporizer and a collector, forming the separation system, and the laser system. The vaporizer produces a stream of pure gaseous uranium.

Laser excitation

The laser commonly used is a two-stage tunable pulsed dye laser usually pumped by a copper vapor laser;[4][5] the master oscillator is tunable, narrow-linewidth, low noise, and highly precise.[6] Its power is significantly increased by a dye laser amplifier acting as optical amplifier. Three frequencies ("colors") of lasers are used for full ionization of uranium-235.[7]

For AVLIS in other elements, such as lithium, tunable narrow-linewidth diode lasers are used.[8]

Commercialization and international significance

In the largest technology transfer in U.S. government history, in 1994 the AVLIS process was transferred to the United States Enrichment Corporation for commercialization. However, on 9 June 1999 after a $100 million investment, USEC cancelled its AVLIS program.

AVLIS continues to be developed by some countries and it presents some specific challenges to international monitoring.[9] Iran is now known to have had a secret AVLIS program. However, since it was uncovered in 2003, Iran has claimed to have dismantled it.[10][11]

Brief history

The history of AVLIS, as recorded in the open refereed literature, began in the early-mid 1970s in the former Soviet Union and the United States.[12] In the US, AVLIS research was mainly carried out at the Lawrence Livermore National Laboratory although some industrial laboratories were early players. Tunable laser development for AVLIS, applicable to uranium, has also been reported from several countries including Pakistan (1974), Australia (1982-1984), France (1984), India (1994), and Japan (1996).[12]

See also

References
  1. L. J. Radziemski, R. W. Solarz, and J. A. Paisner (Eds.), Laser Spectroscopy and its Applications (Marcel Dekker, New York, 1987) Chapter 3.
  2. Petr A. Bokhan, Vladimir V. Buchanov, Nikolai V. Fateev, Mikhail M. Kalugin, Mishik A. Kazaryan, Alexander M. Prokhorov, Dmitrij E. Zakrevskii: Laser Isotope Separation in Atomic Vapor. Wiley-VCH, Berlin, August 2006, ISBN 3-527-40621-2
  3. "Uranium Enrichment Tails Upgrading (Re-enrichment)".
  4. F. J. Duarte and L.W. Hillman (Eds.), Dye Laser Principles (Academic, New York, 1990) Chapter 9.
  5. C. E. Webb, High-power dye lasers pumped by copper vapor lasers, in High Power Dye Lasers, F. J. Duarte (Ed.) (Springer, Berlin, 1991) Chapter 5.
  6. F. J. Duarte and J. A. Piper, Narrow linewidth high prf copper laser-pumped dye-laser oscillators, Appl. Opt. 23, 1391-1394 (1984).
  7. ""Annex 3": List of Items to Be Reported to IAEA". Iraqwatch.org. Archived from the original on 2011-05-14. Retrieved 2010-11-22.
  8. I. E. Olivares, A. E. Duarte, E. A. Saravia, and F. J. Duarte, Lithium isotope separation with tunable diode lasers, Appl. Opt. 41, 2973-2977 (2002).
  9. Ferguson, Charles D.; Boureston, Jack (March–April 2005). "Laser Enrichment: Separation Anxiety". Council on Foreign Relations. Archived from the original on 2010-12-22. Retrieved 2010-11-22.
  10. Ferguson, Charles D.; Boureston, Jack (June 17, 2004). "Focusing on Iran's Laser Enrichment Program" (PDF). FirstWatch International. Retrieved 2010-11-22.
  11. Paul Rogers (March 2006). "Iran's Nuclear Activities". Oxford Research Group. Archived from the original on 2007-02-06. Retrieved 2010-11-22. {{cite journal}}: Cite journal requires |journal= (help)
  12. F. J. Duarte (2016). "Tunable laser atomic vapor laser isotope separation". In F. J. Duarte (ed.). Tunable Laser Applications (3rd ed.). Boca Raton: CRC Press. pp. 371–384. ISBN 9781482261066.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.