Absolute configuration

Absolute configuration refers to the spatial arrangement of atoms within a chiral molecular entity (or group) and its resultant stereochemical description.[1] Absolute configuration is typically relevant in organic molecules where carbon is bonded to four different substituents. This type of construction creates two possible enantiomers. Absolute configuration uses a set of rules to describe the relative positions of each bond around the chiral center atom. The most common labeling method uses the descriptors R or S and is based on the Cahn–Ingold–Prelog priority rules. R and S refer to rectus and sinister, Latin for right and left, respectively.

Absolute configuration showing the determination of the R and S descriptors

Chiral molecules can differ in their chemical properties, but are identical in their physical properties, which can make distinguishing enantiomers challenging. Absolute configurations for a chiral molecule (in pure form) are most often obtained by X-ray crystallography, although with some important limitations. All enantiomerically pure chiral molecules crystallise in one of the 65 Sohncke groups (chiral space groups). Alternative techniques include optical rotatory dispersion, vibrational circular dichroism, ultraviolet-visible spectroscopy, the use of chiral shift reagents in proton NMR and Coulomb explosion imaging.[2][3]

History

Until 1951, it was not possible to obtain the absolute configuration of chiral compounds.[4] It was at some time decided that (+)-glyceraldehyde was the D-enantiomer. The configuration of other chiral compounds was then related to that of (+)-glyceraldehyde by sequences of chemical reactions. For example, oxidation of (+)-glyceraldehyde (1) with mercury oxide gives (−)-glyceric acid (2), a reaction that does not alter the stereocenter. Thus the absolute configuration of (−)-glyceric acid must be the same as that of (+)-glyceraldehyde. Nitric acid oxidation of (+)-isoserine (3) gives (–)-glyceric acid, establishing that (+)-isoserine also has the same absolute configuration. (+)-Isoserine can be converted by a two-stage process of bromination and zinc reduction to give (–)-lactic acid, therefore (–)-lactic acid also has the same absolute configuration. If a reaction gave the enantiomer of a known configuration, as indicated by the opposite sign of optical rotation, it would indicate that the absolute configuration is inverted.

Determination of relationships in absolute configuration

In 1951, Johannes Martin Bijvoet for the first time used in X-ray crystallography the effect of anomalous dispersion, which is now referred to as resonant scattering, to determine absolute configuration.[5] The compound investigated was (+)-sodium rubidium tartrate and from its configuration (R,R) it was deduced that the original guess for (+)-glyceraldehyde was correct.

Despite the tremendous and unique impact on access to molecular structures, X-ray crystallography poses some challenges. The process of crystallization of the target molecules is time- and resource-intensive, and can not be applied to relevant systems of interest such as many biomolecules (some proteins are an exception) and in situ catalysts. Another important limitation is that the molecule must contain ‘heavy’ atoms (for example, bromine) to enhance the scattering.[6] Furthermore, crucial distorsions of the signal arise from the influence of the nearest neighbors in any crystal structure and of solvents used during the crystallization process.

Just recently, novel techniques have been introduced to directly investigate the absolute configuration of single molecules in gas-phase, usually in combination with ab initio quantum mechanical theoretical calculations, therefore overcoming some of the limitations of the X-ray crystallography.[7]

Conventions

By absolute configuration: R- and S-
Examples of absolute configuration of some carbohydrates and amino acids according to Fischer projection (D/L system) and Cahn–Ingold–Prelog priority rules (R / S system)

The R / S system is an important nomenclature system for denoting enantiomers. This approach labels each chiral center R or S according to a system by which its substituents are each assigned a priority, according to the Cahn–Ingold–Prelog priority rules (CIP), based on atomic number. When the center is oriented so that the lowest-priority substituent of the four is pointed away from the viewer, the viewer will then see two possibilities: if the priority of the remaining three substituents decreases in clockwise direction, it is labeled R (for Rectus, Latin for right); if it decreases in counterclockwise direction, it is S (for Sinister, Latin for left).[8]

(R) or (S) is written in italics and parentheses. If there are multiple chiral carbons, e.g. (1R,4S), a number specifies the location of the carbon preceding each configuration.[9]

The R / S system also has no fixed relation to the D/L system. For example, the side-chain one of serine contains a hydroxyl group, -OH. If a thiol group, -SH, were swapped in for it, the D/L labeling would, by its definition, not be affected by the substitution. But this substitution would invert the molecule's R / S labeling, because the CIP priority of CH2OH is lower than that for CO2H but the CIP priority of CH2SH is higher than that for CO2H. For this reason, the D/L system remains in common use in certain areas of biochemistry, such as amino acid and carbohydrate chemistry, because it is convenient to have the same chiral label for the commonly occurring structures of a given type of structure in higher organisms. In the D/L system, nearly all naturally occurring amino acids are all L, while naturally occurring carbohydrates are nearly all D. All proteinogenic amino acids are S, except for cysteine, which is R.

By optical rotation: (+)- and (−)- or d- and l-

An enantiomer can be named by the direction in which it rotates the plane of polarized light. Clockwise rotation of the light traveling toward the viewer is labeled (+) enantiomer. Its mirror-image is labeled (−). The (+) and (−) isomers have been also termed d- and l- (for dextrorotatory and levorotatory); but, naming with d- and l- is easy to confuse with D- and L- labeling and is therefore discouraged by IUPAC.[10]

By relative configuration: D- and L-

An optical isomer can be named by the spatial configuration of its atoms. The D/L system (named after Latin dexter and laevus, right and left), not to be confused with the d- and l-system, see above, does this by relating the molecule to glyceraldehyde. Glyceraldehyde is chiral itself and its two isomers are labeled D and L (typically typeset in small caps in published work). Certain chemical manipulations can be performed on glyceraldehyde without affecting its configuration, and its historical use for this purpose (possibly combined with its convenience as one of the smallest commonly used chiral molecules) has resulted in its use for nomenclature. In this system, compounds are named by analogy to glyceraldehyde, which, in general, produces unambiguous designations, but is easiest to see in the small biomolecules similar to glyceraldehyde. One example is the chiral amino acid alanine, which has two optical isomers, and they are labeled according to which isomer of glyceraldehyde they come from. On the other hand, glycine, the amino acid derived from glyceraldehyde, has no optical activity, as it is not chiral (it's achiral).

The D/L labeling is unrelated to (+)/(−) - it does not indicate which enantiomer is dextrorotatory and which is levorotatory. Rather, it indicates the compound's stereochemistry relative to that of the dextrorotatory or levorotatory enantiomer of glyceraldehyde. The dextrorotatory isomer of glyceraldehyde is, in fact, the D- isomer. Nine of the nineteen L-amino acids commonly found in proteins are dextrorotatory (at a wavelength of 589 nm), and D-fructose is also referred to as levulose because it is levorotatory. A rule of thumb for determining the D/L isomeric form of an amino acid is the "CORN" rule. The groups

COOH, R, NH2 and H (where R is the side-chain)

are arranged around the chiral center carbon atom. With the hydrogen atom away from the viewer, if the arrangement of the CO→R→N groups around the carbon atom as center is counter-clockwise, then it is the L form.[11] If the arrangement is clockwise, it is the D form. As usual, if the molecule itself is oriented differently, for example, with H towards the viewer, the pattern may be reversed. The L form is the usual one found in natural proteins. For most amino acids, the L form corresponds to an S absolute stereochemistry, but is R instead for certain side-chains.

See also

References
  1. IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "absolute configuration". doi:10.1351/goldbook.A00020
  2. "Snapshots differentiate molecules from their mirror image". www.mpg.de. Retrieved 16 February 2021.
  3. Pitzer, Martin; Kunitski, Maksim; Johnson, Allan S.; Jahnke, Till; Sann, Hendrik; Sturm, Felix; Schmidt, Lothar Ph. H.; Schmidt-Böcking, Horst; Dörner, Reinhard; Stohner, Jürgen; Kiedrowski, Julia; Reggelin, Michael; Marquardt, Sebastian; Schießer, Alexander; Berger, Robert; Schöffler, Markus S. (6 September 2013). "Direct Determination of Absolute Molecular Stereochemistry in Gas Phase by Coulomb Explosion Imaging". Science. 341 (6150): 1096–1100. Bibcode:2013Sci...341.1096P. doi:10.1126/science.1240362. ISSN 0036-8075. PMID 24009390. S2CID 206549826.
  4. Organic Chemistry (4th Edition) Paula Y. Bruice
  5. Bijvoet, J. M.; Peerdeman, A. F.; van BOMMEL, A. J. (August 1951). "Determination of the Absolute Configuration of Optically Active Compounds by Means of X-Rays". Nature. 168 (4268): 271–272. Bibcode:1951Natur.168..271B. doi:10.1038/168271a0. ISSN 0028-0836. S2CID 4264310.
  6. Haesler, J.; Schindelholz, I.; Riguet, E.; Bochet, C. G.; Hug, W. (March 2007). "Absolute configuration of chirally deuterated neopentane" (PDF). Nature. 446 (7135): 526–529. Bibcode:2007Natur.446..526H. doi:10.1038/nature05653. ISSN 0028-0836. PMID 17392783. S2CID 4423560.
  7. Fehre, K.; Nalin, G.; Novikovskiy, N. M.; Grundmann, S.; Kastirke, G.; Eckart, S.; Trinter, F.; Rist, J.; Hartung, A.; Trabert, D.; Janke, Ch; Pitzer, M.; Zeller, S.; Wiegandt, F.; Weller, M.; Kircher, M.; Hofmann, M.; Schmidt, L. Ph H.; Knie, A.; Hans, A.; Ltaief, L. Ben; Ehresmann, A.; Berger, R.; Fukuzawa, H.; Ueda, K.; Schmidt-Böcking, H.; Williams, J. B.; Jahnke, T.; Dörner, R.; Demekhin, Ph V.; Schöffler, M. S. (2022). "A new route for enantio-sensitive structure determination by photoelectron scattering on molecules in the gas phase". Physical Chemistry Chemical Physics. 24 (43): 26458–26465. arXiv:2101.03375. Bibcode:2022PCCP...2426458F. doi:10.1039/D2CP03090J. PMID 36305893. S2CID 253183411.
  8. Andrew Streitwieser & Clayton H. Heathcock (1985). Introduction to Organic Chemistry (3rd ed.). Macmillan Publishing Company.
  9. Klein, David R. (2013-12-31). Organic Chemistry (2nd ed.). Wiley. p. 208. ISBN 978-1118454312.
  10. Moss, G. P. (1 January 1996). "Basic terminology of stereochemistry (IUPAC Recommendations 1996)". Pure and Applied Chemistry. 68 (12): 2193–2222. doi:10.1351/pac199668122193. ISSN 1365-3075. S2CID 98272391. Retrieved 16 February 2021.
  11. "Nomenclature and Symbolism for Amino Acids and Peptides". Pure Appl Chem. 56 (5): 595–624. 1984. doi:10.1351/pac198456050595.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.