Absorption band

According to quantum mechanics, atoms and molecules can only hold certain defined quantities of energy, or exist in specific states. When electromagnetic radiation is absorbed by an atom or molecule, the energy of the radiation changes the state of the atom or molecule from an initial state to a final state. The number of states in a specific energy range is discrete for gaseous or diluted systems, with discrete energy levels. Condensed systems, like liquids or solids, have a continuous density of states distribution and often possess continuous energy bands. In order for a substance to change its energy it must do so in a series of "steps" by the absorption of a photon. This absorption process can move a particle, like an electron, from an occupied state to an empty or unoccupied state. It can also move a whole vibrating or rotating system, like a molecule, from one vibrational or rotational state to another or it can create a quasiparticle like a phonon or a plasmon in a solid.

Schematic diagram of electromagnetic absorption

When a photon is absorbed, the electromagnetic field of the photon disappears as it initiates a change in the state of the system that absorbs the photon. Energy, momentum, angular momentum, magnetic dipole moment and electric dipole moment are transported from the photon to the system. Because there are conservation laws, that have to be satisfied, the transition has to meet a series of constraints. This results in a series of selection rules. It is not possible to make any transition that lies within the energy or frequency range that is observed.

The strength of an electromagnetic absorption process is mainly determined by two factors. First it is important to realize that transitions that only change the magnetic dipole moment of the system are much weaker than transitions that change the electric dipole moment and that transitions to higher order moments like quadrupole transitions are weaker than dipole transitions. Second, not all transitions have the same transition matrix element, absorption coefficient or oscillator strength.

For some types of bands or spectroscopic disciplines temperature and statistical mechanics plays an important role. For (far) infrared, microwave and radio frequency ranges the temperature dependent occupation numbers of states and the difference between Bose-Einstein statistics and Fermi-Dirac statistics determines the intensity of observed absorptions. For other energy ranges thermal motion effects, like Doppler broadening may determine the linewidth.

A Mössbauer absorption spectrum of ⁵⁷Fe with very sharp lines

A wide variety of absorption band and line shapes exist, and the analysis of the band or line shape can be used to determine information about the system that causes it. In many cases it is convenient to assume that a narrow spectral line is a Lorentzian or Gaussian, depending respectively on the decay mechanism or temperature effects like Doppler broadening. Analysis of the spectral density and the intensities, width and shape of spectral lines sometimes can yield a lot of information about the observed system like it is done with Mössbauer spectra.

In systems with a very large number of states like macromolecules and large conjugated systems the separate energy levels can't always be distinguished in an absorption spectrum. If the line broadening mechanism is known and the shape of then spectral density is clearly visible in the spectrum, it is possible to get the desired data. Sometimes it is enough to know the lower or upper limits of the band or its position for an analysis.

For condensed matter and solids the shape of absorption bands are often determined by transitions between states in their continuous density of states distributions. For crystals the electronic band structure determines the density of states. In fluids, glasses and amorphous solids there is no long range correlation and the dispersion relations are isotropic. This makes density of states calculations of absorption band shapes easier. For charge-transfer complexes and conjugated systems the band width is determined by a variety of factors.

Materials with broad absorption bands are being applied in pigments, dyes and optical filters. Titanium dioxide, zinc oxide and chromophores are applied as UV absorbers and reflectors in sunscreen.

In oxygen:

• the Hopfield bands, very strong, between about 67 and 100 nanometres in the ultraviolet (named after John J. Hopfield);
• a diffuse system between 101.9 and 130 nanometres;
• the Schumann–Runge continuum, very strong, between 135 and 176 nanometres;
• the Schumann–Runge bands between 176 and 192.6 nanometres (named for Victor Schumann and Carl Runge);
• the Herzberg bands between 240 and 260 nanometres (named after Gerhard Herzberg);
• the atmospheric bands between 538 and 771 nanometres in the visible spectrum; including the oxygen δ (~580 nm), γ (~629 nm), B (~688 nm), and A-band (~759-771 nm)[3]
• a system in the infrared at about 1000 nanometres.[4]

In ozone:

• the Hartley bands between 200 and 300 nanometres in the ultraviolet, with a very intense maximum absorption at 255 nanometres (named after Walter Noel Hartley);
• the Huggins bands, weak absorption between 320 and 360 nanometres (named after Sir William Huggins);
• the Chappuis bands (sometimes misspelled "Chappius"), a weak diffuse system between 375 and 650 nanometres in the visible spectrum (named after J. Chappuis); and
• the Wulf bands in the infrared beyond 700 nm, centered at 4,700, 9,600 and 14,100 nanometres, the latter being the most intense (named after Oliver R. Wulf).

In nitrogen:

• The Lyman–Birge–Hopfield bands, sometimes known as the Birge–Hopfield bands, in the far ultraviolet: 140– 170 nm (named after Theodore Lyman, Raymond T. Birge, and John J. Hopfield)

• Franck–Condon principle
• Spectroscopy
• Spectral line