Adirondack (train)

As part of an effort to improve on-time performance along the Empire Corridor, Amtrak reached an agreement with CSX to lease the CSX Hudson Subdivision between Poughkeepsie and Schenectady. Starting in 2012, Amtrak effectively took operational control of the Hudson Subdivision, handling all maintenance and capital responsibilities.[11] Even with this move, Amtrak still operates less than half of the trackage along the Adirondack route.

In 2012, U.S. Customs and Border Protection began planning a preclearance facility at Montreal Central Station, which would allow departing passengers to be prescreened in Montreal, where northbound passengers would be processed by the Canada Border Services Agency upon arrival, rather than at the border itself. Presently, the Adirondack must stop at Lacolle, Quebec northbound and Rouses Point, New York southbound for immigration procedures that can take up to two hours.[12] By early 2017, the United States Congress had passed its necessary enabling legislation.[13] The corresponding Canadian legislation was given royal assent in late 2017, though it is yet to enter into force.[14]

On April 10, 2018, Amtrak announced that all trains using the Empire Connection, excluding the Lake Shore Limited, would operate into Grand Central Terminal from May 26 to September 4, 2018, to allow work on the Empire Tunnel, the Spuyten Duyvil movable bridge, and Track 19 in New York's Penn Station.[15]

For most of the summer of 2019, the northbound Adirondack ran combined with the northbound Maple Leaf due to infrastructure work at Penn Station, splitting in Albany. The two trains ran separately on weekends during July and August.[16]

In March 2020, the Adirondack was truncated to Albany–Rensselaer after all non-essential travel across the Canada–United States border was banned in response to the COVID-19 pandemic.[17][18] In July 2021, that truncated service was replaced by the resumption of Ethan Allen Express service, which overlaps the Adirondack between New York City and Fort Edward.

Weekday service from New York City to Albany resumed on December 5, 2022.[19] Full service resumption to Montreal took place on April 3, 2023; the Port Kent stop remained closed, as service on the Port Kent-Burlington Ferry remained suspended indefinitely.[20][21]

The Canadian National Railway (CN) owns the Rouses Point Subdivision, a 47-mile (76 km) section of track that runs from Rouses Point, New York, to the vicinity of Montreal. During the COVID-19 suspension track conditions "deteriorat[ed]", forcing Amtrak to lengthen an already long running time between Rouses Point and Montreal.[22] Citing a concern over heat kinks, CN imposed a 10 miles per hour (16 km/h) speed restriction when temperatures exceeded 30 °C (86 °F), leading to one trip over in mid-June taking four hours. On June 26, Amtrak suspended service "until further notice" north of Albany over the track conditions.[23] Amtrak criticized "inconsistent application of CN’s historical heat order policy"; CN claimed that Amtrak had failed to pay for maintenance to the track, which Amtrak disputed.[24]

Adirondack service was extended to Saratoga Springs on July 24, 2023, to serve the Saratoga Race Course meet. Trains are turned using a CP wye near Saratoga Springs. Montreal service was not expected to resume until mid-September.[25] As of September 2, 2023, Montreal service expected to resume on September 11.[26]

Most Adirondack trains consist of five to seven cars hauled by a locomotive.[3]

The passenger cars are the Amfleet series built by the Budd Company in the mid-1970s to early-1980s. Most trains include a Café car (food service/lounge) and four to six Coach Class cars. Unlike other Empire Corridor trains, the Adirondack does not offer business class seating.[3]

All cars offer complimentary WiFi, an electric outlet (120 V, 60 Hz AC) at each seat, reading lamps, and fold-out tray tables. Passengers self-select seats on a first-come, first-served basis.[27] Reservations are required on all trains, tickets may be purchased online, from an agent at some stations, a ticketing machine at most stations, or, at a higher cost, from the conductor on the train.[28]

Between New York City and Albany–Rensselaer, trains are pulled by a GE Genesis P32AC-DM dual-mode diesel locomotive at speeds up to 110 mph (177 km/h). The locomotives operate on third rail electric power in Penn Station and the Empire Connection tunnel and on diesel power for the rest of the route.[29] Between Albany–Rensselaer and Montréal traditional diesel-only GE Genesis locomotives are used.

The Adirondack debuted in 1974 with D&H equipment, much of it ex-Laurentian, as Amtrak was experiencing equipment shortages. These were supplemented by a pair of Skyline dome cars leased from the Canadian Pacific Railway. Two D&H ALCO PA diesel locomotives hauled each train. On March 1, 1977, new Turboliner gas turbine trainsets took over from the D&H cars. Conventional Amtrak equipment would eventually displace the Turboliners.[30]

In the coming years all equipment will be replaced with Amtrak Airo trainsets, the railroad's branding of its combination of Siemens Venture passenger cars and a Siemens Charger diesel-electric locomotive.[31] The trainsets for the Adirondack will have six passenger cars, which will include a cab control car, a food service area, and a mix of 2x2 Coach Class and 2x1 Business Class seating.[32] The car closest to the locomotive will have batteries to supply electricity to traction motors in the locomotive when operating in Penn Station and the Empire Connection tunnel, eliminating the need for third rail propulsion. The arrangement will eliminate the time-consuming locomotive change at Albany–Rensselaer.

The Adirondack operates over Canadian National Railway, Canadian Pacific Kansas City, CSX Transportation, Metro-North Railroad and Amtrak rails:[33]

• CN St-Hyacinthe Subdivision, Montreal to Southwark: 6.15 mi (9.90 km) [34]
• CN Rouses Point Subdivision, Southwark to Rouses Point: 42.7 mi (68.7 km)
• CPKC Canadian Subdivision, Rouses Point to Ballston: 169.3 mi (272.5 km)
• CPKC Freight Subdivision, Ballston to Schenectady: 4.6 mi (7.4 km)
• CSX Hudson Subdivision, Schenectady to Poughkeepsie (trackage leased by Amtrak): 86.3 mi (138.9 km)
• Metro-North Hudson Line, Poughkeepsie to Spuyten Duyvil: 61.8 mi (99.5 km)
• Amtrak Empire Connection, Spuyten Duyvil to Penn Station 11.4 mi (18.3 km)