Anti-theft system

In addition to the initial obtainable cost of an item, the cost of replacement or recovery from theft of the item is usually considered when considering the cost of installing an anti-theft system. This cost estimation usually determines the maximum cost of the anti-theft system and the need to secure it. Expensive items will generally be secured with a higher cost anti-theft system, while low-cost items will generally be secured at a lower cost. Insurance companies will often mandate a minimum type of anti-theft system as part of the conditions for insurance.

Anti-theft systems are designed to raise the difficulty of theft to an infeasible (but not necessarily impossible) level. The kind of system implemented often depends on the acceptable threshold for theft. For example, keeping money in an inside shirt pocket increases the difficulty of theft above that necessary if the pocket was on a backpack, since unauthorized access is made sufficiently more difficult. Methods of theft evolve to decrease the difficulty of theft, increased by newer anti-theft systems. Because of evolution on both sides and the social aspect of theft, the threshold for theft is very dynamic and heavily dependent on the environment. Doors in quiet suburban neighborhoods are often left unlocked, as the perceived thresholds for theft are very high.

Security is often compromised through the lax application of theft-prevention practices and human nature in general. The average anti-theft device does not require any additional effort while using the secured item, without reducing the level of security. In practice, users of security systems may intentionally reduce the effectiveness of an anti-theft system to increase its usability (see passwords). For example, a home security system will usually be enabled and disabled with an easy-to-remember code such as "1111" or "123", instead of a more secure combination.

A very common method of preventing theft is the placement of valuables in a safe location. The definition of safe depends on the minimum threshold for theft as determined by the owner. Desk stationery is often considered to be secured if placed in an unlocked drawer away from view, while expensive jewelry might be placed in a safe behind a picture in a home.

Another common method is the alerting of other individuals to the act of theft. This is commonly seen in department stores, where security systems at exits alert store employees of the removal of unpaid items. Older car alarms also fall into this category; newer systems also prevent the car from starting or raise an SOS alarm if ever the tracking device is detached from the car or valuable asset. The revolution of mobile applications and wireless communication make possible to get notified by your phone, when your properties are stolen. Probably the first solution of mobile application based theft detection is BluCop, which was published in December 2010.

Yet another method is the attachment of items to a larger immobile object, usually furniture or walls.

Items with specific functionality can often be disabled to prevent use of the item should it be stolen. The anti-theft system can require disabling on every use, or enabling when the item should be secured. Disabling the anti-theft system is usually done by requiring identification of the owner at some stage of use. Identification can occur physically or through other methods (physical keys, numerical codes, complex passwords, biometric identification). This can work even retrospectively: as a stolen credit card can easily be invalidated with a phone call to the issuing bank, the motivation to steal one is reduced.

In the case of vehicle theft, the best deterrent to theft is in the installation of an approved vehicle anti-theft passive immobilizer. Many vehicles have factory-installed anti-theft units, which provide protection through the ignition system. Under the hood there is a computer that controls the operation of the engine. It is programmed to verify that the RFID tag attached to the key is correct before the ECM will allow ignition to occur. An approved immobilizer uses a three circuit isolation system which thwarts even the most experienced thief.

Security tags are devices that are attached to products to prevent shoplifting and are often used in conjunction with an electronic article surveillance system. SelectaDNA or Smartwater are such security tags - a forensic fluid which contains millions of tiny fragments which have a unique number called "SIN" ("SelectaDNA identification number"), and registered in a national police database together with the owner's details, is etched into each of those particles.

Electronic devices such as laptops, cell phones and even gadgets such as iPods now have software that enable them to "phone home" with information regarding their whereabouts and other information that can assist law enforcement in tracking down the devices.

Assets can be marked with various forensic marking materials for law enforcement tracking of the item. Examples of this type of marking include SelectaDNA and Smartwater.