Aurora Borealis (icebreaker)

Aurora Borealis is a proposed European research icebreaker, comparable to the world's strongest icebreakers,[2] planned jointly by a consortium of fifteen participant organizations and companies[3] from ten European nations. If built, she would be the largest icebreaker ever built as well as the first icebreaker built to the highest IACS ice class, Polar Class 1.

rough sketch of ERI Aurora Borealis
History
NameAurora Borealis
NamesakeAurora Borealis
OperatorEuropean Science Foundation
Cost
  • 800 M€
  • <500 M€ (Aurora Slim)
General characteristics (initial concept)[1]
TypeIcebreaker
Displacement65,000 tons
Length199.85 m (655.7 ft)
Beam
  • 49 m (161 ft) (moulded)
  • 45 m (148 ft) (waterline)
Draught13 m (43 ft)
Ice classPolar Class 1
Installed powerEight main generators, 94 MW
Propulsion
  • Diesel-electric; three shafts (3 × 27 MW)
  • Three fixed-pitch propellers
  • Six retractable transverse thrusters (4.5 MW each)
Speed
  • 15.5 knots (28.7 km/h; 17.8 mph) (max)
  • 12 knots (22 km/h; 14 mph) (cruising)
  • 2–3 knots (3.7–5.6 km/h; 2.3–3.5 mph) in 2.5 m (8.2 ft) multi-year ice
Endurance90 days
CrewAccommodations for 120 personnel (science and crew)
Aviation facilities2 helipads, hangar for 3 helicopters

The unique feature of the proposed vessel is its ability to perform scientific deep sea drilling in a sea ice covered ocean. The ship is proposed to have an operational lifetime of 35 to 40 years, with the main area of operations being the inner Arctic Ocean.

History and background

Model of the European research icebreaker Aurora Borealis.

The planning for the vessel started in 2002. The project is coordinated by the European Polar Board, an expert board of the European Science Foundation.[4]

In March 2007 the BMBF (the German Federal Ministry for Science and Education) funded the preparations for Aurora Borealis, the Helmholtz Association center Alfred Wegener Institute for Polar and Marine Research hosted this project.

In 2010, the German Council of Science and Humanities stopped to support the planning which made the future of the 800-million-euro ship, designed by Schiffko[2] (nowadays Wärtsilä Ship Design[5]), uncertain. The project has been delayed, and a slightly smaller and cheaper (less than 500-million-euro) version, Aurora Slim, has been suggested by the Finnish engineering company Aker Arctic.[5]

Aurora Slim

The most prominent change from Aurora Borealis to Aurora Slim is that the insulated drilling rig is no longer present. The scientist have to rely on a mobile system and shallower boreholes of a few hundred metres instead of more than 1,000 metres (3,300 ft). She will also have only a single moon pool instead of two as in the original concept.[6]

Like the original concept, the vessel is designed to break level ice up to 2.5 metres (8.2 ft) in thickness. However, the dynamical positioning system of the smaller vessel consists of three 15 MW azimuth thrusters and two 3.5 MW bow thrusters instead of three fixed propeller shafts with 27 MW propulsion motors and six 4.5 MW retractable transverse thrusters. The number and output of generating sets has also been reduced.[6]

Participants

The participants in the Aurora Borealis project are listed in the following table.[7]

ParticipantCountry of origin
European Science FoundationESFFrance
Alfred Wegener Institute for Polar und Marine Research in the Helmholtz AssociationAWIGermany
Consiglio Nazionale delle RicercheCNRItaly
Programma Nazionale di Ricerche in AntartidePNRAItaly
Centre National de la Recherché Scientifique - Institut National des sciences L’UniversCNRS-INSUFrance
Arctic and Antarctic Research InstituteAARIRussia
Institut Polaire Français Paul Emile VictorIPEVFrance
Merentutkimuslaitos (Finnish Institute of Marine Research)MTLFinland
Netherlands Organisation for Scientific ResearchNWONetherlands
University of BergenUIBNorway
Bundesministerium für Bildung und ForschungBMBFGermany
Fonds National de la Recherche ScientifiqueFNRSBelgium
Bulgarian Antarctic InstituteBAIBulgaria
Romanian Antarctic FoundationFARRomania
Aker Arctic Technology IncAARCFinland

References

  1. Technical details Archived April 25, 2012, at the Wayback Machine. European Research Icebreaker AURORA BOREALIS. Retrieved 2011-12-23.
  2. Data Sheet for Overview Archived October 30, 2012, at the Wayback Machine. Retrieved 2012-10-09.
  3. "Aurora Borealis: European Research Icebreaker". European Science Foundation. Archived from the original on April 16, 2009. Retrieved 2009-05-25.
  4. "Focus on Aurora Borealis". European Science Foundation. 2010-08-24. Archived from the original on 2011-09-27. Retrieved 2011-10-15. The European Science Foundation has a major role in the development effort for such a research vessel. The European Polar Board (EPB), an ESF expert committee, coordinates the EC's FP7 project 'European Research Icebreaker Consortium - AURORA BOREALIS' (ERICON-AB) that is preparing a strategic, legal and organisational framework for construction and operation of AURORA BOREALIS.
  5. Finnish ship designers blaze trail to Arctic maritime routes. Helsingin Sanomat, 8 January 2012. Retrieved 2012-02-27.
  6. ERICON-AB Aurora Slim Archived August 11, 2014, at the Wayback Machine. Mikko Niini, 1 March 2012. Retrieved 2012-09-07.
  7. "Participants of the ERICON project". European Science Foundation. 2009-01-23. Archived from the original on 2011-09-22. Retrieved 2009-07-10.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.