Acacia melanoxylon

The tree is able to grow to a height of around 20 m (66 ft) and has a bole that is approximately 150 cm (59 in) in diameter. It has deeply fissured, dark-grey to black coloured bark that appears quite scaly on older trees. It has angular and ribbed branches. The bark on older trunks is dark greyish-black in colour, deeply fissured and somewhat scaly. Younger branches are glabrous, ribbed and angular to flattened near the greenish coloured tips. The stems of younger plants are occasionally hairy. Like most species of Acacia it has phyllodes rather than true leaves. The glabrous, glossy, leathery, dark green to greyish-green phyllodes have a length of 4 to 16 cm (1.6 to 6.3 in) and a width of 6 to 30 mm (0.24 to 1.18 in) with a variable shape. They most often have a narrowly elliptic to lanceolate shape and are straight to slightly curved and often taper near the base and have three to five prominent longitudinal veins.[3]

In its native area it blooms between July and December producing inflorescences that appear in groups of two to eight on an axillary raceme. The spherical flower-heads have a diameter of 5 to 10 mm (0.20 to 0.39 in) and contain 30 to 50 densely packed pale yellow to nearly white coloured flowers. Following flowering smooth, firmly papery and glabrous seed pods form. The curved, twisted or coiled pods have a biconvex shape with a length of 4 to 12 cm (1.6 to 4.7 in) and a width of 5 to 8 mm (0.20 to 0.31 in) and contain longitudinally arranged seeds.[4]

The species was first formally described by the botanist Robert Brown in 1813 as a part of the William Aiton work Hortus Kewensis. It was reclassified as Racosperma melanoxylon by Leslie Pedley in 1986 then returned to genus Acacia in 2006. Several other synonyms are known including Acacia arcuata, Mimosa melanoxylon and Acacia melanoxylon var. obtusifolia.[5]

In its native range the tree is found down the east coast of Australia from Queensland in the north, down the east coast into New South Wales, through Victoria and west along the south coast of South Australia. It is also found down the east coast of Tasmania. It has become naturalised in Western Australia. In New South Wales it is widespread from coastal area and into the Great Dividing Range but is not found further inland. It is commonly found at higher altitudes to the Nandewar Range, Liverpool Range and around Orange in the west and is mostly found as a part of wet sclerophyll forest communities or near cooler rainforest communities.[4] The range of the pant extends from the Atherton Tableland in northern Queensland in the north and follows the coast to around the Mount Lofty Range in the South Australia in the south west and can grow in a wide range of podsols especially in sandy loams.[2]

Acacia melanoxylon is valued for its decorative timber which may be used in cabinets, musical instruments and in boatbuilding.

Properties

Acacia melanoxylon timber has a density of approximately 660 kg/m³ and is strong in compression, resistant to impact and is moderately stiff. It is moderately blunting to work with tools and bends well. It may be nailed or screwed with ease, but gluing may produce variable results. The wood is easily stained and produces a high-quality finish.

Australian blackwood seasons easily with some possible cupping when boards are inadequately restrained. The timber produces little movement once seasoned.

The timber may be attacked by furniture beetles, termites and powder-post beetles (sapwood). It is resistant to effective preservative treatments.

Acacia melanoxylon older bark

It has been introduced to many countries for forestry plantings and as an ornamental tree. It now is present in Africa, Asia, Europe, Indian Ocean, the Pacific Ocean, South America and the United States. It is a declared noxious weed species in South Africa and is a pest in Portugal's Azores Islands. It was also recently listed by the California Invasive Plant Council (Cal-IPC) as an invasive weed that may cause limited impact (Knapp 2003). Its use as a street tree is being phased out in some locales because of the damage it often causes to pavements and underground plumbing. In some regions of Tasmania, blackwood is now considered a pest.

Indigenous Australians use various parts of this tree in a wide variety of ways.[7] The seed is edible, while the tree's leaves are used as soap or a fishing poison.[7][8] The bark can be used to make string or a traditional analgesic.[7][9] The hard timber is used to make clap sticks, spear-throwers and shields.[7][10]

The wood has many uses including wood panels, furniture, fine cabinetry, tools, boats, inlaid boxes and wooden kegs. It is approximately the same quality as walnut, and is well-suited for shaping with steam. The bark has a tannin content of about 20%.[11] It may also be used for producing decorative veneers.

This tree can also be used as a fire barrier plant, amongst other plants, in rural situations.

Plain and figured Australian blackwood is used in musical instrument making (in particular guitars, drums, Hawaiian ukuleles, violin bows and organ pipes), and in recent years has become increasingly valued as a substitute for koa wood.

Wikispecies has information related to Acacia melanoxylon.

Wikimedia Commons has media related to Acacia melanoxylon.

• Acacia melanoxylon
• DermNet dermatitis/plants/blackwood

• https://web.archive.org/web/20070928160933/http://www.ellisguitars.com/AustralianBlackwood.html Musical instrument maker utilizing Acacia melanoxylon
• https://web.archive.org/web/20090526074902/http://www.fidockdrums.com/product.htm#blackwood
• Management of Blackwood in Plantations