Bangor and Portland Railway

The Bangor and Portland Railway (B&P) was an American railroad incorporated in 1879. It began operations between Bangor and Portland, Pennsylvania, the following year. In 1880, the company merged with the Bangor and Bath Railroad, giving an extension to Bath. A branch opened in 1885 from Bangor, extending along Martins Creek to connect with the Pennsylvania Railroad at the town of Martins Creek on the Delaware River. The Delaware, Lackawanna and Western Railroad (DL&W) acquired the B&P as its Bangor and Portland Division in July 1903, and fully absorbed it six years later.[1]

Bangor and Portland Railway
Overview
LocaleBangor, Pennsylvania to Portland, Pennsylvania
Dates of operation18791909
SuccessorDelaware, Lackawanna and Western Railroad
Technical
Track gauge4 ft 8+12 in (1,435 mm) standard gauge

Structures

This railroad crosses Martins Creek on an unusual bridge with two different spans, a 67-foot (20 m) riveted deck girder and a 56-foot (17 m) riveted lattice deck truss. The bridge originally had two 67-foot (20 m) deck girder spans, but these were doubled up to increase their strength. The 56-foot (17 m) lattice deck truss spans were salvaged from Bridge No. 138 on the DL&W's Buffalo Division and a new abutment constructed to accommodate the shorter span.[2]

The bridge is the second at the location. The first, a trestle, was wrecked by the 1955 flood caused by Hurricane Diane. The DL&W abandoned it and built the current bridge. Its remains are still visible.

References

  1. Taber, Thomas T. III (1987). Railroads of Pennsylvania: Encyclopedia and Atlas. Muncy, Pa.: Thomas T. Taber III. p. 315. OCLC 24000242.
  2. Milepost 96.50, region/division/branch 626255, correspondence files, Consolidated Rail Corporation, Philadelphia, Pa., subsequently transferred to Norfolk Southern Railway Co., Atlanta, Ga.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.