Baritone saxophone

The baritone saxophone was created in 1846 by the Belgian instrument maker Adolphe Sax as one of a family of 14 instruments. Sax believed these instruments would provide a useful tonal link between the woodwinds and brasses. The family was divided into two groups of seven saxophones each, from the soprano to the contrabass. Though a design for an F baritone saxophone is included in the C and F family of saxophones, no known F baritones exist.[1] The family consisting of saxophones in the keys of B♭ and E♭ was more successful because of their popularity in military bands.[2]

All saxophones were originally keyed to low B, but a low B♭ mechanism was patented in 1887[3] and by 1910 this was standard for most saxophones including baritones. This low B♭ is a concert D♭ on baritone saxophone, and players began creating 'low A pipes' to insert into the bell to extend the range to the very useful concert C just below that (low A on the baritone sax). This made the low B♭ inaccessible and low B out of tune.[4] This method is still used today by some players.[5] From the 1930s through the 1950s, manufacturers experimented with extending the bell to add a low A key to the instrument. The simplest way was to add a cylindrical section between the bell and bow to provide the extra length and tone hole, and some makers produced and sold instruments built this way, but these horns generally suffer from intonation problems in the lowest few notes and players often consider their tone poor as well. Selmer Paris began producing low A versions of the Mark VI baritone saxophone in the late 1950s which had a bell that had been designed separately from the low B♭ version (such a bell may have been a custom-order option before this time), and these instruments do not generally suffer from the same intonation problems as horns with a cylindrical extension. In the 1970s, Yamaha's YBS-61 was keyed to low A with no low B♭ option, and by the 1980s most baritones were being manufactured with a low A bell. In modern times, only a few manufacturers still produce low B♭ instruments, as the low A is considered standard and is often written in sheet music for the instrument.

In its original form, the baritone saxophone's highest keyed note was high E♭, but instruments keyed to high F became standard during the 1920s. High F♯ became a rare option starting in the 1950s and slowly became more common, but as with other modern saxophones, most baritones are now manufactured with a high F♯ key.

The baritone saxophone, like other saxophones, is a conical tube of thin brass. It has a wider end, flared to form a bell, and a smaller end connected to a mouthpiece. The baritone saxophone uses a single reed mouthpiece like that of a clarinet. There is a loop in the top of the body (sometimes also known as the 'pigtail') in two U-shaped pieces of tube called the upper bow and spit bow, to reduce it to a practical height.

Baritone saxophones are typically found in two versions with one ranging to low A and the other to low B♭.[6] Despite the ubiquity of the low A horn, some players still prefer to use B♭ horns because of the added weight of a low A bell[5] or because of personal preference for a particular vintage instrument. Some also believe low A horns sound inferior in the low range,[5] however this is the subject of debate among players.

The baritone saxophone's relatively large mass (11 to 20 pounds or 5.0 to 9.1 kilograms, depending on the manufacturer's choice of material and structural designs, and whether it has a low A key) has led to the development of harness-style alternatives to neck straps which distribute the instrument's weight across the user's shoulders.[7] Several different kinds exist which each distribute weight differently across the saxophonist's neck, clavicle, and shoulder blades. Many marching saxophonists prefer this style for its ability to decrease fatigue. Those who mainly perform seated, on the other hand, may dislike the decreased ability to move one's upper body with a harness.[7] Some modern instruments are also produced with mounts for floor pegs to reduce weight on the player's neck when seated, similar to those found on bass clarinets.

It is a transposing instrument in the key of E♭, pitched an octave plus a major sixth lower than written. It is one octave lower than the alto saxophone. Modern baritones with a low A key and high F♯ key have a range from C₂ to A₄.

As with all saxophones, its music is written in treble clef. By coincidence, it is possible to use a trick known as clef substitution to read music written in bass clef at concert pitch (for example most tuba or bassoon parts), by reading as if it were a transposing part in treble clef and pretending there were three more sharps (or three fewer flats) in the key signature. A similar trick allows instruments in B♭ like the tenor saxophone to read concert pitch tenor clef.

The baritone saxophone is used as a standard member of concert bands and saxophone quartets.

It has also been occasionally called for in music for orchestra. Examples include Richard Strauss' Sinfonia Domestica, which calls for a baritone saxophone in F; Béla Bartók's The Wooden Prince ballet music; Charles Ives' Symphony No. 4, composed in 1910–1916; and Gershwin's Rhapsody in Blue (Grofé's orchestration)[8] and An American in Paris.[9] In his opera The Devils of Loudun (Die Teufel von Loudun), Krzysztof Penderecki calls for two baritone saxes. Karlheinz Stockhausen includes a baritone saxophone in Gruppen and Stravinsky calls for one in his Ebony Concerto.

It has a comparatively small solo repertoire although an increasing number of concertos have appeared, one of these being "Concerto for Saxophone Quartet and Orchestra" by American composer Philip Glass. This is a piece that can be played with or without an orchestra that features the baritone sax in the second movement.[10] The American composer Mark Watters' Rhapsody for Baritone Saxophone has been scored for piano, wind ensemble, and orchestra. This single-movement solo for the baritone sax includes a virtuosic cadenza.

A number of jazz performers have used the baritone saxophone as their primary instrument. It is part of standard big band instrumentation (the larger bass saxophone was also occasionally used up until the 1940s). As phrased by Alain Cupper from JazzBariSax.com, "Used a few times in contemporary classical music...it is especially in jazz that this wonderful instrument feels most comfortable."[11] One of the instrument's pioneers was Harry Carney, longtime baritone saxophone player in the Duke Ellington band.

Since the mid-1950s, baritone saxophone soloists such as Gerry Mulligan, Cecil Payne, and Pepper Adams achieved fame, while Serge Chaloff was the first baritone saxophone player to achieve fame as a bebop soloist. In free jazz, Peter Brötzmann is notable.

A noted Scottish performer was Joe Temperley, who appeared with Humphrey Lyttelton as well as with the Lincoln Center Jazz Orchestra.

More recent notable performers include Hamiet Bluiett (who has also led a group of baritone saxophone players), John Surman, Scott Robinson, James Carter, Stephen "Doc" Kupka of the band Tower of Power, Nick Brignola, Gary Smulyan, Brian Landrus, and Ronnie Cuber. In the avant-garde scene, Tim Berne has doubled on bari. Jazz/funk player Leo Pellegrino of Lucky Chops and Too Many Zooz has become popular with younger listeners for his aggressive playing style and energetic performances.

Baritone saxophonist in a military band of the Italian Army

The baritone sax is an important part of military bands and is common in musical theater. The baritone sax appeared in many early rock-and-roll hits of the 1950s, played a prominent role in many Motown hits of the 1960s, notably by King Curtis, and appeared in the 1970s and beyond in acts such as Bruce Springsteen's E Street Band, played by Clarence Clemons. It is often in the horn sections of funk, blues, Latin, soul bands.

Prominent baritone saxophonists in contemporary American popular music include Stephen Kupka of Tower of Power, Dana Colley of Morphine, Leroi Moore of the Dave Matthews Band, John Linnell of They Might Be Giants and Martin Perna of Antibalas, the Dap-Kings and TV on the Radio

Nigerian Afrobeat singer, musician, and bandleader Fela Kuti typically featured two baritone saxophone players in his band.

A few modern non-jazz artists have recently begun to incorporate saxophones into their instrumentation. The LA Indie rock band Fitz and the Tantrums featured both an alto and a baritone saxophone in their music—most recently their 2016 song "Handclap" from an album of the same name. Both were played by band member James King.[12][13] The "Brass house" (experimental jazz/funk) group Too Many Zooz is another group that has popularized the baritone saxophone. Originally a New York City subway band, the trio has released three albums and been featured on a TEDxYouth@Budapest segment.[14][15]

Lisa Simpson from the cartoon comedy series The Simpsons plays the baritone sax.[16]

• Instruments In Depth: The Saxophone—An online feature with video demonstrations from Bloomingdale School of Music (June, 2009)
• Saxophone acoustics from the University of New South Wales
• Great Jazz Baritone Saxophonists and vintage horns—A website with extensive information on popular baritone saxophonists, information regarding the baritone saxophone, and more.