Quaternary numeral system

Quaternary /kwəˈtɜːrnəri/ is a numeral system with four as its base. It uses the digits 0, 1, 2, and 3 to represent any real number. Conversion from binary is straightforward.

Four is the largest number within the subitizing range and one of two numbers that is both a square and a highly composite number (the other being thirty-six), making quaternary a convenient choice for a base at this scale. Despite being twice as large, its radix economy is equal to that of binary. However, it fares no better in the localization of prime numbers (the smallest better base being the primorial base six, senary).

Quaternary shares with all fixed-radix numeral systems many properties, such as the ability to represent any real number with a canonical representation (almost unique) and the characteristics of the representations of rational numbers and irrational numbers. See decimal and binary for a discussion of these properties.

Relation to other positional number systems

Numbers zero to sixty-four in standard quaternary (0 to 1000)
Decimal 0123456789101112131415
Binary 01101110010111011110001001101010111100110111101111
Quaternary 0123101112132021222330313233
Octal 012345671011121314151617
Hexadecimal 0123456789ABCDEF
Decimal 16171819202122232425262728293031
Binary 10000100011001010011101001010110110101111100011001110101101111100111011111011111
Quaternary 100101102103110111112113120121122123130131132133
Octal 20212223242526273031323334353637
Hexadecimal 101112131415161718191A1B1C1D1E1F
Decimal 32333435363738394041424344454647
Binary 100000100001100010100011100100100101100110100111101000101001101010101011101100101101101110101111
Quaternary 200201202203210211212213220221222223230231232233
Octal 40414243444546475051525354555657
Hexadecimal 202122232425262728292A2B2C2D2E2F
Decimal 48495051525354555657585960616263
Binary 110000110001110010110011110100110101110110110111111000111001111010111011111100111101111110111111
Quaternary 300301302303310311312313320321322323330331332333
Octal 60616263646566677071727374757677
Hexadecimal 303132333435363738393A3B3C3D3E3F
Decimal 64
Binary 1000000
Quaternary 1000
Octal 100
Hexadecimal 40

Relation to binary and hexadecimal

addition
table
+123
12310
231011
3101112

As with the octal and hexadecimal numeral systems, quaternary has a special relation to the binary numeral system. Each radix four, eight, and sixteen is a power of two, so the conversion to and from binary is implemented by matching each digit with two, three, or four binary digits, or bits. For example, in quaternary,

2302104 = 10 11 00 10 01 002.

Since sixteen is a power of four, conversion between these bases can be implemented by matching each hexadecimal digit with two quaternary digits. In the above example,

23 02 104 = B2416

Although octal and hexadecimal are widely used in computing and computer programming in the discussion and analysis of binary arithmetic and logic, quaternary does not enjoy the same status.

Although quaternary has limited practical use, it can be helpful if it is ever necessary to perform hexadecimal arithmetic without a calculator. Each hexadecimal digit can be turned into a pair of quaternary digits. Then, arithmetic can be performed relatively easily before converting the end result back to hexadecimal. Quaternary is convenient for this purpose, since numbers have only half the digit length compared to binary, while still having very simple multiplication and addition tables with only three unique non-trivial elements.

multiplication
table
×123
1123
221012
331221

By analogy with byte and nybble, a quaternary digit is sometimes called a crumb.

Fractions

Due to having only factors of two, many quaternary fractions have repeating digits, although these tend to be fairly simple:

Decimal base
Prime factors of the base: 2, 5
Prime factors of one below the base: 3
Prime factors of one above the base: 11
Other prime factors: 7 13 17 19 23 29 31
Quaternary base
Prime factors of the base: 2
Prime factors of one below the base: 3
Prime factors of one above the base: 5 (=114)
Other prime factors: 13 23 31 101 103 113 131 133
Fraction Prime factors
of the denominator
Positional representation Positional representation Prime factors
of the denominator
Fraction
1/2 2 0.5 0.2 2 1/2
1/3 3 0.3333... = 0.3 0.1111... = 0.1 3 1/3
1/4 2 0.25 0.1 2 1/10
1/5 5 0.2 0.03 11 1/11
1/6 2, 3 0.16 0.02 2, 3 1/12
1/7 7 0.142857 0.021 13 1/13
1/8 2 0.125 0.02 2 1/20
1/9 3 0.1 0.013 3 1/21
1/10 2, 5 0.1 0.012 2, 11 1/22
1/11 11 0.09 0.01131 23 1/23
1/12 2, 3 0.083 0.01 2, 3 1/30
1/13 13 0.076923 0.010323 31 1/31
1/14 2, 7 0.0714285 0.0102 2, 13 1/32
1/15 3, 5 0.06 0.01 3, 11 1/33
1/16 2 0.0625 0.01 2 1/100
1/17 17 0.0588235294117647 0.0033 101 1/101
1/18 2, 3 0.05 0.0032 2, 3 1/102
1/19 19 0.052631578947368421 0.003113211 103 1/103
1/20 2, 5 0.05 0.003 2, 11 1/110
1/21 3, 7 0.047619 0.003 3, 13 1/111
1/22 2, 11 0.045 0.002322 2, 23 1/112
1/23 23 0.0434782608695652173913 0.00230201121 113 1/113
1/24 2, 3 0.0416 0.002 2, 3 1/120
1/25 5 0.04 0.0022033113 11 1/121
1/26 2, 13 0.0384615 0.0021312 2, 31 1/122
1/27 3 0.037 0.002113231 3 1/123
1/28 2, 7 0.03571428 0.0021 2, 13 1/130
1/29 29 0.0344827586206896551724137931 0.00203103313023 131 1/131
1/30 2, 3, 5 0.03 0.002 2, 3, 11 1/132
1/31 31 0.032258064516129 0.00201 133 1/133
1/32 2 0.03125 0.002 2 1/200
1/33 3, 11 0.03 0.00133 3, 23 1/201
1/34 2, 17 0.02941176470588235 0.00132 2, 101 1/202
1/35 5, 7 0.0285714 0.001311 11, 13 1/203
1/36 2, 3 0.027 0.0013 2, 3 1/210

Occurrence in human languages

Many or all of the Chumashan languages (spoken by the Native American Chumash peoples) originally used a quaternary numeral system, in which the names for numbers were structured according to multiples of four and sixteen, instead of ten. There is a surviving list of Ventureño language number words up to thirty-two written down by a Spanish priest ca. 1819.[1]

The Kharosthi numerals (from the languages of the tribes of Pakistan and Afghanistan) have a partial quaternary numeral system from one to ten.

Hilbert curves

Quaternary numbers are used in the representation of 2D Hilbert curves. Here, a real number between 0 and 1 is converted into the quaternary system. Every single digit now indicates in which of the respective four sub-quadrants the number will be projected.

Genetics

Parallels can be drawn between quaternary numerals and the way genetic code is represented by DNA. The four DNA nucleotides in alphabetical order, abbreviated A, C, G, and T, can be taken to represent the quaternary digits in numerical order 0, 1, 2, and 3. With this encoding, the complementary digit pairs 0↔3, and 1↔2 (binary 00↔11 and 01↔10) match the complementation of the base pairs: A↔T and C↔G and can be stored as data in DNA sequence.[2] For example, the nucleotide sequence GATTACA can be represented by the quaternary number 2033010 (= decimal 9156 or binary 10 00 11 11 00 01 00). The human genome is 3.2 billion base pairs in length.[3]

Data transmission

Quaternary line codes have been used for transmission, from the invention of the telegraph to the 2B1Q code used in modern ISDN circuits.

The GDDR6X standard, developed by Nvidia and Micron uses quaternary bits to transmit data [4]

Computing

Some computers have used quaternary floating point arithmetic including the Illinois ILLIAC II (1962)[5] and the Digital Field System DFS IV and DFS V high-resolution site survey systems.[6]

See also

References

  1. Beeler, Madison S. (1986). "Chumashan Numerals". In Closs, Michael P. (ed.). Native American Mathematics. ISBN 0-292-75531-7.
  2. "Bacterial based storage and encryption device" (PDF). iGEM 2010: The Chinese University of Hong Kong. 2010. Archived from the original (PDF) on 14 December 2010. Retrieved 27 November 2010.{{cite web}}: CS1 maint: location (link)
  3. Chial, Heidi (2008). "DNA Sequencing Technologies Key to the Human Genome Project". Nature Education. 1 (1): 219.
  4. "NVIDIA GeForce RTX 30 Series GPUs Powered by Ampere Architecture".
  5. Beebe, Nelson H. F. (22 August 2017). "Chapter H. Historical floating-point architectures". The Mathematical-Function Computation Handbook - Programming Using the MathCW Portable Software Library (1 ed.). Salt Lake City, UT, USA: Springer International Publishing AG. p. 948. doi:10.1007/978-3-319-64110-2. ISBN 978-3-319-64109-6. LCCN 2017947446. S2CID 30244721.
  6. Parkinson, Roger (7 December 2000). "Chapter 2 - High resolution digital site survey systems - Chapter 2.1 - Digital field recording systems". High Resolution Site Surveys (1 ed.). CRC Press. p. 24. ISBN 978-0-20318604-6. Retrieved 18 August 2019. [...] Systems such as the [Digital Field System] DFS IV and DFS V were quaternary floating-point systems and used gain steps of 12 dB. [...] (256 pages)
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.