Beltrami equation

In mathematics, the Beltrami equation, named after Eugenio Beltrami, is the partial differential equation

for w a complex distribution of the complex variable z in some open set U, with derivatives that are locally L2, and where μ is a given complex function in L(U) of norm less than 1, called the Beltrami coefficient, and where and are Wirtinger derivatives. Classically this differential equation was used by Gauss to prove the existence locally of isothermal coordinates on a surface with analytic Riemannian metric. Various techniques have been developed for solving the equation. The most powerful, developed in the 1950s, provides global solutions of the equation on C and relies on the Lp theory of the Beurling transform, a singular integral operator defined on Lp(C) for all 1 < p < ∞. The same method applies equally well on the unit disk and upper half plane and plays a fundamental role in Teichmüller theory and the theory of quasiconformal mappings. Various uniformization theorems can be proved using the equation, including the measurable Riemann mapping theorem and the simultaneous uniformization theorem. The existence of conformal weldings can also be derived using the Beltrami equation. One of the simplest applications is to the Riemann mapping theorem for simply connected bounded open domains in the complex plane. When the domain has smooth boundary, elliptic regularity for the equation can be used to show that the uniformizing map from the unit disk to the domain extends to a C function from the closed disk to the closure of the domain.

Metrics on planar domains

Consider a 2-dimensional Riemannian manifold, say with an (x, y) coordinate system on it. The curves of constant x on that surface typically don't intersect the curves of constant y orthogonally. A new coordinate system (u, v) is called isothermal when the curves of constant u do intersect the curves of constant v orthogonally and, in addition, the parameter spacing is the same — that is, for small enough h, the little region with and is nearly square, not just nearly rectangular. The Beltrami equation is the equation that has to be solved in order to construct isothermal coordinate systems.

To see how this works, let S be an open set in C and let

be a smooth metric g on S. The first fundamental form of g

is a positive real matrix (E > 0, G > 0, EGF2 > 0) that varies smoothly with x and y.

The Beltrami coefficient of the metric g is defined to be

This coefficient has modulus strictly less than one since the identity

implies that

Let f(x,y) =(u(x,y),v(x,y)) be a smooth diffeomorphism of S onto another open set T in C. The map f preserves orientation just when its Jacobian is positive:

And using f to pull back to S the standard Euclidean metric ds2 = du2 + dv2 on T induces a metric on S given by

a metric whose first fundamental form is

When f both preserves orientation and induces a metric that differs from the original metric g only by a positive, smoothly varying scale factor r(x, y), the new coordinates u and v defined on S by f are called isothermal coordinates.

To determine when this happens, we reinterpret f as a complex-valued function of a complex variable f(x+iy) = u(x+iy) + iv(x+iy) so that we can apply the Wirtinger derivatives:

Since

the metric induced by f is given by

The Beltrami quotient of this induced metric is defined to be .

The Beltrami quotient of equals the Beltrami coefficient of the original metric g just when

The real and imaginary parts of this identity linearly relate and and solving for and gives

It follows that the metric induced by f is then r(x, y) g(x,y), where which is positive, while the Jacobian of f is then which is also positive. So, when the new coordinate system given by f is isothermal.

Conversely, consider a diffeomorphism f that does give us isothermal coordinates. We then have

where the scale factor r(x, y) has dropped out and the expression inside the square root is the perfect square Since f must preserve orientation to give isothermal coordinates, the Jacobian is the positive square root; so we have

The right-hand factors in the numerator and denominator are equal and, since the Jacobian is positive, their common value can't be zero; so

Thus, the local coordinate system given by a diffeomorphism f is isothermal just when f solves the Beltrami equation for

Isothermal coordinates for analytic metrics

Gauss proved the existence of isothermal coordinates locally in the analytic case by reducing the Beltrami to an ordinary differential equation in the complex domain.[1] Here is a cookbook presentation of Gauss's technique.

An isothermal coordinate system, say in a neighborhood of the origin (x, y) = (0, 0), is given by the real and imaginary parts of a complex-valued function f(x, y) that satisfies

Let be such a function, and let be a complex-valued function of a complex variable that is holomorphic and whose derivative is nowhere zero. Since any holomorphic function has identically zero, we have

Thus, the coordinate system given by the real and imaginary parts of is also isothermal. Indeed, if we fix to give one isothermal coordinate system, then all of the possible isothermal coordinate systems are given by for the various holomorphic with nonzero derivative.

When E, F, and G are real analytic, Gauss constructed a particular isothermal coordinate system the one that he chose being the one with for all x. So the u axis of his isothermal coordinate system coincides with the x axis of the original coordinates and is parameterized in the same way. All other isothermal coordinate systems are then of the form for a holomorphic with nonzero derivative.

Gauss lets q(t) be some complex-valued function of a real variable t that satisfies the following ordinary differential equation:

where E, F, and G are here evaluated at y = t and x = q(t). If we specify the value of q(s) for some start value s, this differential equation determines the values of q(t) for t either less than or greater than s. Gauss then defines his isothermal coordinate system h by setting h(x, y) to be along the solution path of that differential equation that passes through the point (x, y), and thus has q(y) = x.

This rule sets h(x, 0) to be , since the starting condition is then q(0)=x. More generally, suppose that we move by an infinitesimal vector (dx, dy) away from some point (x, y), where dx and dy satisfy

Since , the vector (dx, dy) is then tangent to the solution curve of the differential equation that passes through the point (x, y). Because we are assuming the metric to be analytic, it follows that

for some smooth, complex-valued function We thus have

We form the quotient and then multiply numerator and denominator by , which is the complex conjugate of the denominator. Simplifying the result, we find that

Gauss's function h thus gives the desired isothermal coordinates.

Solution in L2 for smooth Beltrami coefficients

In the simplest cases the Beltrami equation can be solved using only Hilbert space techniques and the Fourier transform. The method of proof is the prototype for the general solution using Lp spaces, although Adrien Douady has indicated a method for handling the general case using only Hilbert spaces: the method relies on the classical theory of quasiconformal mappings to establish Hölder estimates that are automatic in the Lp theory for p > 2.[2] Let T be the Beurling transform on L2(C) defined on the Fourier transform of an L2 function f as a multiplication operator:

It is a unitary operator and if f is a tempered distribution on C with partial derivatives in L2 then

where the subscripts denote complex partial derivatives.

The fundamental solution of the operator

is given by the distribution

a locally integrable function on C. Thus on Schwartz functions f

The same holds for distributions of compact support on C. In particular if f is an L2 function with compact support, then its Cauchy transform, defined as

is locally square integrable. The above equation can be written

Moreover, still regarding f and Cf as distributions,

Indeed, the operator D is given on Fourier transforms as multiplication by iz/2 and C as multiplication by its inverse.

Now in the Beltrami equation

with μ a smooth function of compact support, set

and assume that the first derivatives of g are L2. Let h = gz = fz – 1. Then

If A and B are the operators defined by

then their operator norms are strictly less than 1 and

Hence

where the right hand sides can be expanded as Neumann series. It follows that

has the same support as μ and g. Hence f is given by

Elliptic regularity can now be used to deduce that f is smooth.

In fact, off the support of μ,

so by Weyl's lemma f is even holomorphic for |z| > R. Since f = CT*h + z, it follows that f tends to 0 uniformly as |z| tends to ∞.

The elliptic regularity argument to prove smoothness, however, is the same everywhere and uses the theory of L2 Sobolev spaces on the torus.[3] Let ψ be a smooth function of compact support on C, identically equal to 1 on a neighbourhood of the support of μ and set F = ψ f. The support of F lies in a large square |x|, |y| ≤ R, so, identifying opposite sides of the square, F and μ can be regarded as a distribution and smooth function on a torus T2. By construction F is in L2(T2). As a distribution on T2 it satisfies

where G is smooth. On the canonical basis em of L2(T2) with m in Z + i Z, define

Thus U is a unitary and on trigonometric polynomials or smooth functions P

Similarly it extends to a unitary on each Sobolev space Hk(T2) with the same property. It is the counterpart on the torus of the Beurling transform. The standard theory of Fredholm operators shows that the operators corresponding to Iμ U and IU μ are invertible on each Sobolev space. On the other hand,

Since UG is smooth, so too is (IμU)F and hence also F.

Thus the original function f is smooth. Regarded as a map of C = R2 into itself, the Jacobian is given by

This Jacobian is nowhere vanishing by a classical argument of Ahlfors (1966). In fact formally writing fz = ek, it follows that

This equation for k can be solved by the same methods as above giving a solution tending to 0 at ∞. By uniqueness h + 1 = ek so that

is nowhere vanishing. Since f induces a smooth map of the Riemann sphere C ∪ ∞ into itself which is locally a diffeomorphism, f must be a diffeomorphism. In fact f must be onto by connectedness of the sphere, since its image is an open and closed subset; but then, as a covering map, f must cover each point of the sphere the same number of times. Since only ∞ is sent to ∞, it follows that f is one-to-one.

The solution f is a quasiconformal conformal diffeomorphism. These form a group and their Beltrami coefficients can be computed according to the following rule:[4]

Moreover, if f(0) = 0 and

then[5]

This formula reflects the fact that on a Riemann surface, a Beltrami coefficient is not a function. Under a holomorphic change of coordinate w = w(z), the coefficient is transformed to

Defining a smooth Beltrami coefficient on the sphere in this way, if μ is such a coefficient then, taking a smooth bump function ψ equal to 0 near 0, equal 1 for |z| > 1 and satisfying 0 ≤ ψ ≤ 1, μ can be written as a sum of two Beltrami coefficients:

Let g be the quasiconformal diffeomorphism of the sphere fixing 0 and ∞ with coefficient μ. Let λ be the Beltrami coefficient of compact support on C defined by

If f is the quasiconformal diffeomorphism of the sphere fixing 0 and ∞ with coefficient λ, then the transformation formulas above show that fg−1 is a quasiconformal diffeomorphism of the sphere fixing 0 and ∞ with coefficient μ.

The solutions of Beltrami's equation restrict to diffeomorphisms of the upper halfplane or unit disk if the coefficient μ has extra symmetry properties;[6] since the two regions are related by a Möbius transformation (the Cayley transform), the two cases are essentially the same.

For the upper halfplane Im z > 0, if μ satisfies

then by uniqueness the solution f of the Beltrami equation satisfies

so leaves the real axis and hence the upper halfplane invariant.

Similarly for the unit disc |z| < 1, if μ satisfies

then by uniqueness the solution f of the Beltrami equation satisfies

so leaves the unit circle and hence the unit disk invariant.

Conversely Beltrami coefficients defined on the closures of the upper halfplane or unit disk which satisfy these conditions on the boundary can be "reflected" using the formulas above. If the extended functions are smooth the preceding theory can be applied. Otherwise the extensions will be continuous but with a jump in the derivatives at the boundary. In that case the more general theory for measurable coefficients μ is required and is most directly handled within the Lp theory.

Smooth Riemann mapping theorem

Let U be an open simply connected domain in the complex plane with smooth boundary containing 0 in its interior and let F be a diffeomorphism of the unit disk D onto U extending smoothly to the boundary and the identity on a neighbourhood of 0. Suppose that in addition the induced metric on the closure of the unit disk can be reflected in the unit circle to define a smooth metric on C. The corresponding Beltrami coefficient is then a smooth function on C vanishing near 0 and ∞ and satisfying

The quasiconformal diffeomorphism h of C satisfying

preserves the unit circle together with its interior and exterior. From the composition formulas for Beltrami coefficients

so that f = Fh−1 is a smooth diffeomorphism between the closures of D and U which is holomorphic on the interior. Thus, if a suitable diffeomorphism F can be constructed, the mapping f proves the smooth Riemann mapping theorem for the domain U.

To produce a diffeomorphism F with the properties above, it can be assumed after an affine transformation that the boundary of U has length 2π and that 0 lies in U. The smooth version of the Schoenflies theorem produces a smooth diffeomorphism G from the closure of D onto the closure of u equal to the identity on a neighbourhood of 0 and with an explicit form on a tubular neighbourhood of the unit circle. In fact taking polar coordinates (r,θ) in R2 and letting (x(θ),y(θ)) (θ in [0,2π]) be a parametrization of ∂U by arclength, G has the form

Taking t = 1 − r as parameter, the induced metric near the unit circle is given by

where

is the curvature of the plane curve (x(θ),y(θ)).

Let

After a change of variable in the t coordinate and a conformal change in the metric, the metric takes the form

where ψ is an analytic real-valued function of t:

A formal diffeomorphism sending (θ,t) to (f(θ,t),t) can be defined as a formal power series in t:

where the coefficients fn are smooth functions on the circle. These coefficients can be defined by recurrence so that the transformed metric only has even powers of t in the coefficients. This condition is imposed by demanding that no odd powers of t appear in the formal power series expansion:

By Borel's lemma, there is a diffeomorphism defined in a neighbourhood of the unit circle, t = 0, for which the formal expression f(θ,t) is the Taylor series expansion in the t variable. It follows that, after composing with this diffeomorphism, the extension of the metric obtained by reflecting in the line t = 0 is smooth.

Hölder continuity of solutions

Douady and others have indicated ways to extend the L2 theory to prove the existence and uniqueness of solutions when the Beltrami coefficient μ is bounded and measurable with L norm k strictly less than one. Their approach involved the theory of quasiconformal mappings to establish directly the solutions of Beltrami's equation when μ is smooth with fixed compact support are uniformly Hölder continuous.[7] In the Lp approach Hölder continuity follows automatically from operator theory.

The Lp theory when μ is smooth of compact support proceeds as in the L2 case. By the Calderón–Zygmund theory the Beurling transform and its inverse are known to be continuous for the Lp norm. The Riesz–Thorin convexity theorem implies that the norms Cp are continuous functions of p. In particular Cp tends to 1 when p tends to 2.

In the Beltrami equation

with μ a smooth function of compact support, set

and assume that the first derivatives of g are Lp. Let h = gz = fz – 1. Then

If A and B are the operators defined by AF = TμF and BF = μTF, then their operator norms are strictly less than 1 and (IA)h = Tμ. Hence

where the right hand sides can be expanded as Neumann series. It follows that

has the same support as μ and g. Hence, up to the addition of a constant, f is given by

Convergence of functions with fixed compact support in the Lp norm for p > 2 implies convergence in L2, so these formulas are compatible with the L2 theory if p > 2.

The Cauchy transform C is not continuous on L2 except as a map into functions of vanishing mean oscillation. [8] On Lp its image is contained in Hölder continuous functions with Hölder exponent 1 − 2p−1 once a suitable constant is added. In fact for a function f of compact support define

Note that the constant is added so that Pf(0) = 0. Since Pf only differs from Cf by a constant, it follows exactly as in the L2 theory that

Moreover, P can be used instead of C to produce a solution:

On the other hand, the integrand defining Pf is in Lq if q−1 = 1 − p−1. The Hölder inequality implies that Pf is Hölder continuous with an explicit estimate:

where

For any p > 2 sufficiently close to 2, Cpk <1. Hence the Neumann series for (IA)−1 and (IB)−1 converge. The Hölder estimates for P yield the following uniform estimates for the normalized solution of the Beltrami equation:

If μ is supported in |z| ≤ R, then

Setting w1 = z and w2 = 0, it follows that for |z| ≤ R

where the constant C > 0 depends only on the L norm of μ. So the Beltrami coefficient of f−1 is smooth and supported in z| ≤ CR. It has the same L norm as that of f. So the inverse diffeomorphisms also satisfy uniform Hölder estimates.

Solution for measurable Beltrami coefficients

Existence

The theory of the Beltrami equation can be extended to measurable Beltrami coefficients μ. For simplicity only a special class of μ will be considered—adequate for most applications—namely those functions which are smooth an open set Ω (the regular set) with complement Λ a closed set of measure zero (the singular set). Thus Λ is a closed set that is contained in open sets of arbitrarily small area. For measurable Beltrami coefficients μ with compact support in |z| < R, the solution of the Beltrami equation can be obtained as a limit of solutions for smooth Beltrami coefficients.[9]

In fact in this case the singular set Λ is compact. Take smooth functions φn of compact support with 0 ≤ φn ≤ 1, equal to 1 on a neighborhood of Λ and 0 off a slightly larger neighbourhood, shrinking to Λ as n increases. Set

The μn are smooth with compact support in |z| < R and

The μn tend to μ in any Lp norm with p < ∞.

The corresponding normalised solutions fn of the Beltrami equations and their inverses gn satisfy uniform Hölder estimates. They are therefore equicontinuous on any compact subset of C; they are even holomorphic for |z| > R. So by the Arzelà–Ascoli theorem, passing to a subsequence if necessary, it can be assumed that both fn and gn converge uniformly on compacta to f and g. The limits will satisfy the same Hölder estimates and be holomorphic for |z| > R. The relations fngn = id = gnfn imply that in the limit fg = id = gf, so that f and g are homeomorphisms.

  • The limits f and g are weakly differentiable.[10] In fact let
These lie in Lp and are uniformly bounded:
Passing to a subsequence if necessary, it can be assumed that the sequences have weak limits u and v in Lp. These are the distributional derivatives of f(z) – z, since if ψ is smooth of compact support
and similarly for v. A similar argument applies for the g using the fact that Beltrami coefficients of the gn are supported in a fixed closed disk.
  • f satisfies the Beltrami equation with Beltrami coefficient μ.[11] In fact the relation u = μv + μ follows by continuity from the relation un = μnvn + μn. It suffices to show that μnvn tends weakly to μv. The difference can be written
The first term tends weakly to 0, while the second term equals μ φn vn. The terms are uniformly bounded in Lp, so to check weak convergence to 0 it enough to check inner products with a dense subset of L2. The inner products with functions of compact support in Ω are zero for n sufficiently large.
  • f carries closed sets of measure zero onto closed sets of measure zero.[12] It suffices to check this for a compact set K of measure zero. If U is a bounded open set containing K and J denotes the Jacobian of a function, then
Thus if A(U) is small, so is A(fn(U)). On the other hand fn(U) eventually contains f(K), for applying the inverse gn, U eventually contains gnf (K) since gnf tends uniformly to the identity on compacta. Hence f(K) has measure zero.
  • f is smooth on the regular set Ω of μ. This follows from the elliptic regularity results in the L2 theory.
  • f has non-vanishing Jacobian there. In particular fz ≠ 0 on Ω.[13] In fact for z0 in Ω, if n is large enough
near z1 = fn(z0). So h = fgn is holomorphic near z1. Since it is locally a homeomorphism, h ' (z1) ≠ 0. Since f =hfn. it follows that the Jacobian of f is non-zero at z0. On the other hand J(f) = |fz|2 (1 − |μ|2), so fz ≠ 0 at z0.
  • g satisfies the Beltrami equation with Beltrami coefficient
or equivalently
on the regular set Ω ' = f(Ω), with corresponding singular set Λ ' = f(Λ).
  • g satisfies the Beltrami equation for μ. In fact g has weak distributional derivatives in 1 + Lp and Lp. Pairing with smooth functions of compact support in Ω, these derivatives coincide with the actual derivatives at points of Ω. Since Λ has measure zero, the distributional derivatives equal the actual derivatives in Lp. Thus g satisfies Beltrami's equation since the actual derivatives do.
  • If f* and f are solutions constructed as above for μ* and μ then f* ∘ f−1 satisfies the Beltrami equation for
defined on Ω ∩ Ω*. The weak derivatives of f* ∘ f−1 are given by the actual derivatives on Ω ∩ Ω*. In fact this follows by approximating f* and g = f−1 by f*n and gn. The derivatives are uniformly bounded in 1 + Lp and Lp, so as before weak limits give the distributional derivatives of f* ∘ f−1. Pairing with smooth functions of compact support in Ω ∩ Ω*, these agree with the usual derivatives. So the distributional derivatives are given by the usual derivatives off Λ ∪ Λ*, a set of measure zero.

This establishes the existence of homeomorphic solutions of Beltrami's equation in the case of Beltrami coefficients of compact support. It also shows that the inverse homeomorphisms and composed homeomorphisms satisfy Beltrami equations and that all computations can be performed by restricting to regular sets.

If the support is not compact the same trick used in the smooth case can be used to construct a solution in terms of two homeomorphisms associated to compactly supported Beltrami coefficients. Note that, because of the assumptions on the Beltrami coefficient, a Möbius transformation of the extended complex plane can be applied to make the singular set of the Beltrami coefficient compact. In that case one of the homeomorphisms can be chosen to be a diffeomorphism.

Uniqueness

There are several proofs of the uniqueness of solutions of the Beltrami equation with a given Beltrami coefficient.[14] Since applying a Möbius transformation of the complex plane to any solution gives another solution, solutions can be normalised so that they fix 0, 1 and ∞. The method of solution of the Beltrami equation using the Beurling transform also provides a proof of uniqueness for coefficients of compact support μ and for which the distributional derivatives are in 1 + Lp and Lp. The relations

for smooth functions ψ of compact support are also valid in the distributional sense for Lp functions h since they can be written as Lp of ψn's. If f is a solution of the Beltrami equation with f(0) = 0 and fz - 1 in Lp then

satisfies

So F is weakly holomorphic. Applying Weyl's lemma [15] it is possible to conclude that there exists a holomorphic function G that is equal to F almost everywhere. Abusing notation redefine F:=G. The conditions F '(z) − 1 lies in Lp and F(0) = 0 force F(z) = z. Hence

and so differentiating

If g is another solution then

Since Tμ has operator norm on Lp less than 1, this forces

But then from the Beltrami equation

Hence fg is both holomorphic and antiholomorphic, so a constant. Since f(0) = 0 = g(0), it follows that f = g. Note that since f is holomorphic off the support of μ and f(∞) = ∞, the conditions that the derivatives are locally in Lp force

For a general f satisfying Beltrami's equation and with distributional derivatives locally in Lp, it can be assumed after applying a Möbius transformation that 0 is not in the singular set of the Beltrami coefficient μ. If g is a smooth diffeomorphism g with Beltrami coefficient λ supported near 0, the Beltrami coefficient ν for fg−1 can be calculated directly using the change of variables formula for distributional derivatives:

λ can be chosen so that ν vanishes near zero. Applying the map z−1 results in a solution of Beltrami's equation with a Beltrami coefficient of compact support. The directional derivatives are still locally in Lp. The coefficient ν depends only on μ, λ and g, so any two solutions of the original equation will produce solutions near 0 with distributional derivatives locally in Lp and the same Beltrami coefficient. They are therefore equal. Hence the solutions of the original equation are equal.

Uniformization of multiply connected planar domains

The method used to prove the smooth Riemann mapping theorem can be generalized to multiply connected planar regions with smooth boundary. The Beltrami coefficient in these cases is smooth on an open set, the complement of which has measure zero. The theory of the Beltrami equation with measurable coefficients is therefore required.[16][17]

Doubly connected domains. If Ω is a doubly connected planar region, then there is a diffeomorphism F of an annulus r ≤ |z| ≤ 1 onto the closure of Ω, such that after a conformal change the induced metric on the annulus can be continued smoothly by reflection in both boundaries. The annulus is a fundamental domain for the group generated by the two reflections, which reverse orientation. The images of the fundamental domain under the group fill out C with 0 removed and the Beltrami coefficient is smooth there. The canonical solution h of the Beltrami equation on C, by the Lp theory is a homeomorphism. It is smooth on away from 0 by elliptic regularity. By uniqueness it preserves the unit circle, together with its interior and exterior. Uniqueness of the solution also implies that reflection there is a conjugate Möbius transformation g such that hR = gh where R denotes reflection in |z| = r. Composing with a Möbius transformation that fixes the unit circle it can be assumed that g is a reflection in a circle |z| = s with s < 1. It follows that Fh−1 is a smooth diffeomorphism of the annulus s ≤ |z| ≤ 1 onto the closure of Ω, holomorphic in the interior.[17]

Multiply connected domains. For regions with a higher degree of connectivity k + 1, the result is essentially Bers' generalization of the retrosection theorem.[16][17] There is a smooth diffeomorphism F of the region Ω1, given by the unit disk with k open disks removed, onto the closure of Ω. It can be assumed that 0 lies in the interior of the domain. Again after a modification of the diffeomorphism and conformal change near the boundary, the metric can be assumed to be compatible with reflection. Let G be the group generated by reflections in the boundary circles of Ω1. The interior of Ω1 iz a fundamental domain for G. Moreover, the index two normal subgroup G0 consisting of orientation-preserving mappings is a classical Schottky group. Its fundamental domain consists of the original fundamental domain with its reflection in the unit circle added. If the reflection is R0, it is a free group with generators RiR0 where Ri are the reflections in the interior circles in the original domain. The images of the original domain by the G, or equivalently the reflected domain by the Schottky group, fill out the regular set for the Schottky group. It acts properly discontinuously there. The complement is the limit set of G0. It has measure zero. The induced metric on Ω1 extends by reflection to the regular set. The corresponding Beltrami coefficient is invariant for the reflection group generated by the reflections Ri for i ≥ 0. Since the limit set has measure zero, the Beltrami coefficient extends uniquely to a bounded measurable function on C. smooth on the regular set. The normalised solution of the Beltrami equation h is a smooth diffeomorphism of the closure of Ω1 onto itself preserving the unit circle, its exterior and interior. Necessarily hRi = Sih. where Si is the reflection in another circle in the unit disk. Looking at fixed points, the circles arising this way for different i must be disjoint. It follows that Fh−1 defines a smooth diffeomorphism of the unit disc with the interior of these circles removed onto the closure of Ω, which is holomorphic in the interior.

Simultaneous uniformization

Bers (1961) showed that two compact Riemannian 2-manifolds M1, M2 of genus g > 1 can be simultaneously uniformized.

As topological spaces M1 and M2 are homeomorphic to a fixed quotient of the upper half plane H by a discrete cocompact subgroup Γ of PSL(2,R). Γ can be identified with the fundamental group of the manifolds and H is a universal covering space. The homeomorphisms can be chosen to be piecewise linear on corresponding triangulations. A result of Munkres (1960) implies that the homeomorphisms can be adjusted near the edges and the vertices of the triangulation to produce diffeomorphisms. The metric on M1 induces a metric on H which is Γ-invariant. Let μ be the corresponding Beltrami coefficient on H. It can be extended to C by reflection

It satisfies the invariance property

for g in Γ. The solution f of the corresponding Beltrami equation defines a homeomorphism of C, preserving the real axis and the upper and lower half planes. Conjugation of the group elements by f−1 gives a new cocompact subgroup Γ1 of PSL(2,R). Composing the original diffeomorphism with the inverse of f then yield zero as the Beltrami coefficient. Thus the metric induced on H is invariant under Γ1 and conformal to the Poincaré metric on H. It must therefore be given by multiplying by a positive smooth function that is Γ1-invariant. Any such function corresponds to a smooth function on M1. Dividing the metric on M1 by this function results in a conformally equivalent metric on M1 which agrees with the Poincaré metric on H / Γ1. In this way M1 becomes a compact Riemann surface, i.e. is uniformized and inherits a natural complex structure.

With this conformal change in metric M1 can be identified with H / Γ1. The diffeomorphism between onto M2 induces another metric on H which is invariant under Γ1. It defines a Beltrami coefficient λ omn H which this time is extended to C by defining λ to be 0 off H. The solution h of the Beltrami equation is a homeomorphism of C which is holomorphic on the lower half plane and smooth on the upper half plane. The image of the real axis is a Jordan curve dividing C into two components. Conjugation of Γ1 by h−1 gives a quasi-Fuchsian subgroup Γ2 of PSL(2,C). It leaves invariant the Jordan curve and acts properly discontinuously on each of the two components. The quotients of the two components by Γ2 are naturally identified with M1 and M2. This identification is compatible with the natural complex structures on both M1 and M2.

Conformal welding

An orientation-preserving homeomorphism f of the circle is said to be quasisymmetric if there are positive constants a and b such that

If

then the condition becomes

Conversely if this condition is satisfied for all such triples of points, then f is quasisymmetric.[18]

An apparently weaker condition on a homeomorphism f of the circle is that it be quasi-Möbius, that is there are constants c, d > 0 such that

where

denotes the cross-ratio. In fact if f is quasisymmetric then it is also quasi-Möbius, with c = a2 and d = b: this follows by multiplying the first inequality above for (z1,z3,z4) and (z2,z4,z3).

Conversely if f is a quasi-Möbius homeomorphism then it is also quasisymmetric.[19] Indeed, it is immediate that if f is quasi-Möbius so is its inverse. It then follows that f (and hence f−1) is Hölder continuous. To see this let S be the set of cube roots of unity, so that if ab in S, then |ab| = 2 sin π/3 = 3. To prove a Hölder estimate, it can be assumed that xy is uniformly small. Then both x and y are greater than a fixed distance away from a, b in S with ab, so the estimate follows by applying the quasi-Möbius inequality to x, a, y, b. To check that f is quasisymmetric, it suffices to find a uniform upper bound for |f(x) − f(y)| / |f(x) − f(z)| in the case of a triple with |xz| = |xy|, uniformly small. In this case there is a point w at a distance greater than 1 from x, y and z. Applying the quasi-Möbius inequality to x, w, y and z yields the required upper bound.

A homeomorphism f of the unit circle can be extended to a homeomorphism F of the closed unit disk which is diffeomorphism on its interior. Douady & Earle (1986), generalizing earlier results of Ahlfors and Beurling, produced such an extension with the additional properties that it commutes with the action of SU(1,1) by Möbius transformations and is quasiconformal if f is quasisymmetric. (A less elementary method was also found independently by Tukia (1985): Tukia's approach has the advantage of also applying in higher dimensions.) When f is a diffeomorphism of the circle, the Alexander extension provides another way of extending f:

where ψ is a smooth function with values in [0,1], equal to 0 near 0 and 1 near 1, and

with g(θ + 2π) = g(θ) + 2π. Partyka, Sakan & Zając (1999) give a survey of various methods of extension, including variants of the Ahlfors-Beurling extension which are smooth or analytic in the open unit disk.

In the case of a diffeomorphism, the Alexander extension F can be continued to any larger disk |z| < R with R > 1. Accordingly, in the unit disc

This is also true for the other extensions when f is only quasisymmetric.

Now extend μ to a Beltrami coefficient on the whole of C by setting it equal to 0 for |z| ≥ 1. Let G be the corresponding solution of the Beltrami equation. Let F1(z) = GF−1(z) for |z| ≤ 1 and F2(z) = G (z) for |z| ≥ 1. Thus F1 and F2 are univalent holomorphic maps of |z| < 1 and |z| > 1 onto the inside and outside of a Jordan curve. They extend continuously to homeomorphisms fi of the unit circle onto the Jordan curve on the boundary. By construction they satisfy the conformal welding condition:

See also

Notes

References

  • Ahlfors, Lars V. (1955), Conformality with respect to Riemannian metrics, Ann. Acad. Sci. Fenn. Ser. A. I., vol. 206
  • Ahlfors, Lars V. (1966), Lectures on quasiconformal mappings, Van Nostrand
  • Astala, Kari; Iwaniec, Tadeusz; Martin, Gaven (2009), Elliptic partial differential equations and quasiconformal mappings in the plane, Princeton Mathematical Series, vol. 48, Princeton University Press, ISBN 978-0-691-13777-3
  • Beltrami, Eugenio (1867), "Saggio di interpretazione della geometria non euclidea (Essay on the interpretation of noneuclidean geometry)" (PDF), Giornale di Mathematica (in Italian), 6, JFM 01.0275.02 English translation in Stillwell (1996)
  • Bers, Lipman (1958), Riemann surfaces, Courant Institute
  • Bers, Lipman; John, Fritz; Schechter, Martin (1979), Partial differential equations, with supplements by Lars Gȧrding and A. N. Milgram, Lectures in Applied Mathematics, vol. 3A, American Mathematical Society, ISBN 0-8218-0049-3, Chapter VI.
  • Bers, Lipman (1961), "Uniformization by Beltrami equations", Comm. Pure Appl. Math., 14 (3): 215–228, doi:10.1002/cpa.3160140304
  • Douady, Adrien; Earle, Clifford J. (1986), "Conformally natural extension of homeomorphisms of the circle", Acta Math., 157: 23–48, doi:10.1007/bf02392590
  • Douady, Adrien; Buff, X. (2000), Le théorème d'intégrabilité des structures presque complexes. [Integrability theorem for almost complex structures], London Math. Soc. Lecture Note Ser., vol. 274, Cambridge Univ. Press, pp. 307–324
  • Glutsyuk, Alexey A. (2008), "Simple proofs of uniformization theorems", Fields Inst. Commun., 53: 125–143
  • Hubbard, John Hamal (2006), Teichmüller theory and applications to geometry, topology, and dynamics. Vol. 1, Matrix Editions, Ithaca, NY, ISBN 978-0-9715766-2-9, MR 2245223
  • Imayoshi, Y.; Taniguchi, M. (1992), An Introduction to Teichmüller spaces, Springer-Verlag, ISBN 0-387-70088-9
  • Iwaniec, Tadeusz; Martin, Gaven (2008), The Beltrami equation, Memoirs of the American Mathematical Society, vol. 191, doi:10.1090/memo/0893, ISBN 978-0-8218-4045-0, MR 2377904
  • Kreyszig, Erwin (1991), Differential Geometry, Dover, ISBN 0-486-66721-9
  • Lehto, Olli; Virtanen, K.I. (1973), Quasiconformal mappings in the plane, Die Grundlehren der mathematischen Wissenschaften, vol. 126 (2nd ed.), Springer-Verlag
  • Lehto, Olli (1987), Univalent functions and Teichmüller spaces, Graduate Texts in Mathematics, vol. 109, Springer-Verlag, ISBN 0-387-96310-3
  • Morrey, Charles B. (1936), "On the solutions of quasi-linear elliptic partial differential equations.", Bulletin of the American Mathematical Society, 42 (5): 316, doi:10.1090/S0002-9904-1936-06297-X, ISSN 0002-9904, JFM 62.0565.02
  • Morrey, Charles B. Jr. (1938), "On the Solutions of Quasi-Linear Elliptic Partial Differential Equations", Transactions of the American Mathematical Society, American Mathematical Society, 43 (1): 126–166, doi:10.2307/1989904, JSTOR 1989904, Zbl 0018.40501
  • Munkres, James (1960), "Obstructions to the smoothing of piecewise-differentiable homeomorphisms", Ann. of Math., 72 (3): 521–554, doi:10.2307/1970228, JSTOR 1970228
  • Papadopoulos, Athanase, ed. (2007), Handbook of Teichmüller theory. Vol. I, IRMA Lectures in Mathematics and Theoretical Physics, 11, European Mathematical Society (EMS), Zürich, doi:10.4171/029, ISBN 978-3-03719-029-6, MR2284826
  • Papadopoulos, Athanase, ed. (2009), Handbook of Teichmüller theory. Vol. II, IRMA Lectures in Mathematics and Theoretical Physics, 13, European Mathematical Society (EMS), Zürich, doi:10.4171/055, ISBN 978-3-03719-055-5, MR2524085
  • Papadopoulos, Athanase, ed. (2012), Handbook of Teichmüller theory. Vol. III, IRMA Lectures in Mathematics and Theoretical Physics, 19, European Mathematical Society (EMS), Zürich, doi:10.4171/103, ISBN 978-3-03719-103-3
  • Partyka, Dariusz; Sakan, Ken-Ichi; Zając, Józef (1999), "The harmonic and quasiconformal extension operators", Banach Center Publ., 48: 141–177, doi:10.4064/-48-1-141-177
  • Sibner, Robert J. (1965), "Uniformization of symmetric Riemann surfaces by Schottky groups", Trans. Amer. Math. Soc., 116: 79–85, doi:10.1090/s0002-9947-1965-0188431-2
  • Spivak, Michael (1999), A comprehensive introduction to differential geometry. Vol. IV (3nd ed.), Publish or Perish, ISBN 0-914098-70-5
  • Stillwell, John (1996), Sources of hyperbolic geometry, History of Mathematics, vol. 10, Providence, R.I.: American Mathematical Society, ISBN 978-0-8218-0529-9, MR 1402697
  • Tukia, P.; Väisälä, J. (1980), "Quasisymmetric embeddings of metric spaces", Ann. Acad. Sci. Fenn. Ser. A I Math., 5: 97–114, doi:10.5186/aasfm.1980.0531
  • Tukia, Pekka (1985), "Quasiconformal extension of quasisymmetric mappings compatible with a Möbius group", Acta Math., 154 (3–4): 153–193, doi:10.1007/bf02392471
  • Väisälä, Jussi (1984), "Quasi-Möbius maps", Journal d'Analyse Mathématique, 44: 218–234, doi:10.1007/bf02790198, S2CID 189767039
  • Vekua, I. N. (1962), Generalized analytic functions, Pergamon Press
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.