Benjamin Wright (civil engineer)

Wright began his career surveying the frontier areas of Oneida and Oswego counties.[4] In 1794 Wright was hired as a surveyor and planner by the noted English canal designer William Weston. Working for Weston, he helped lay out canals and locks on the Mohawk River. After Weston returned to England in 1801, Wright was commissioned to survey the Mohawk River between Schenectady and Rome, and then to the Hudson River.[2]

Wright initially surveyed of the Mohawk River from Rome to the Hudson River on behalf of the Western Inland Lock Navigation Company, but that company didn't have the resources to build the canal.[3]

Profile of the original Erie Canal, c. 1830s

Wright surveyed the same route of the Mohawk River from Rome to the Hudson River again for the New York State Canal Commission in 1811, and by 1816 funding for the Erie Canal was in place. Its construction began in 1817. The ASCE (1996) explained:

What crested challenges for the canal construction were the multiple elevation changes along the route. Hence, the supply of water to the canal and the drainage of excess water were far trickier than single sloped canals. To keep water flowing, an elaborate system of feeders and waste weirs was created. Furthermore, the east-west canal had to transverse multiple north-south running rivers, which called for numerous aqueducts, the largest employing 11 Roman-style arches to span 802 feet across the Genesee River Valley.[4]

The following year Wright was appointed senior engineer in charge of construction of the middle section of the Erie Canal, and later, he was placed in charge of the eastern section as well.[3] He led thousands of unskilled laborers as they built the canal with wheelbarrows, hand tools, horses, and mules. In Wright's honor, the first boat to traverse the canal system was named the Chief Engineer.[2]

Proposed route of Chesapeake and Ohio Canal

In 1822 Wright was engaged by the Chesapeake & Delaware Canal Company to be the canal's chief engineer. While holding that position, he caused John Randel Jr. – who had surveyed the route taken by the canal, and who had been hired as an engineer to build its difficult eastern section – to be fired by the company. Randel sued the company for breach of contract, and tried to sue Wright as well, but that case was thrown out. In 1834 a jury returned an award to Randel of $226,885.84 (equivalent to $6,650,780 in 2022), a tremendous amount for the time. The canal company's appeals went as high as the United States Supreme Court, which affirmed the award. The company attempted to avoid paying the judgment, but the state legislatures of both Maryland and Delaware passed bills requiring the canal company to pay off its debts within five years. The huge award almost bankrupted the company.[5][6]

Wright was approached in 1825 by the Wurts brothers of Philadelphia to survey a possible route from the coalfields of Northeastern Pennsylvania to the Hudson, where anthracite could be shipped by boat downriver to New York City.[7] Wright consented, and served as chief engineer on the Delaware and Hudson Canal for about a year.[8] At that point, he stepped down and became a consulting engineer; the job of chief was taken by John B. Jervis, who had worked under Wright on the Erie Canal.[9]

In 1828, Wright was made Chief Engineer of the newly organized Chesapeake and Ohio Canal, which operated on a route along the Potomac River between Washington, D.C., and Cumberland, Maryland. Within a year, Wright had let contracts for a massive construction effort that encompassed about 6,000 men and 700 horses.[2]