Blue only mode

Old NTSC SMPTE color bar

HD SMPTE color bar

The Blue Only test image from Burosch

In general, all test pattern with a color bar, that includes red, green, blue, and the complementary colors cyan, magenta and yellow can be used to adjust hue and saturation in blue only mode. Particularly often the SMPTE test pattern or the HD version of the SMPTE is used for hue and saturation adjustment. These are in many cases already integrated in the recording and playback devices in the professional sector and are always available. Also the Blue Only-test image of the company Burosch audio video technology is suitable for use with a blue filter foil or just the Blue Only mode of a display. In addition to hue and saturation adjustment, it's possible to even adjust brightness, contrast and to check the transmission path with the burosch test. The above-mentioned test pattern from the Burosch company represents an update of the traditional HD SMPTE test pattern, with additional test zones for complete image control and optimization.

Blue filter foil in use with a color bar

In Blue Only mode only the blue pixels of a display render the picture on the screen - or, for CRT displays, the blue cathode ray tube. Thus we see only the blue channel of the image, but rather blue tinted than black and white. Areas with blue color in it appear bright and those without blue color appear dark or black. A blue color with RGB values of 0 0 255 therefore appears bright. A red area (255 0 0) or a green surface (0 255 0) appears black. Below - or in some test images above - the color bars are reference areas, that serve as an indication for a proper adjustment. Because the reference areas have the same brightness value as the colored bars. If the display is properly adjusted, in the Blue Only Mode the colored areas blend perfectly into the reference areas, without a visible luminance difference. In the HD SMPTE test pattern, the reference area is located below the color bar in the form of a gray continuous surface (white with 75% luminance). In the old NTSC SMPTE test pattern, the reference area is also located under each color bar, but colored differently. The Blue Only-test image of the company Burosch has reference areas above and below the color bars. The following table shows the different colors in the test pattern, the corresponding code values and the visual impression with activates Blue Only Mode:

Blue channel of the ARIB / SMPTE HD test pattern

These must be the display device in the Blue Only mode enable. If this is not possible, you can - as mentioned above - rely on blue filter screens.

• First, set the saturation. Change the value in the menu until the colored bars show seamlessly, with the same brightness and no apparent difference in the reference areas or below the color bar.
• If the color bars are not different from the reference surfaces, is the saturation set correctly?
• The next one is the color correct now?.

Often raise individual colored areas is still subject to the reference areas, or individual colored bars - which actually would appear to be dark - too bright, stand out from the reference surfaces. This is particularly frequent the bars cyan and magenta, with less than but also the green color bar. In this case, the color is so long in the menu, adjust until these color bars are perfect and show no apparent difference in the reference area. Find more detailed instructions in the links.

• Detailed instructions on how to set up a monitor with the Blue Only-test image
• THX test pattern with blue filter glasses