FitzHugh–Nagumo model

It was named after Richard FitzHugh (1922–2007)[2] who suggested the system in 1961[3] and Jinichi Nagumo et al. who created the equivalent circuit the following year.[4]

In the original papers of FitzHugh, this model was called Bonhoeffer–Van der Pol oscillator (named after Karl-Friedrich Bonhoeffer and Balthasar van der Pol) because it contains the Van der Pol oscillator as a special case for ${\displaystyle a=b=0}$. The equivalent circuit was suggested by Jin-ichi Nagumo, Suguru Arimoto, and Shuji Yoshizawa.[5]

Qualitatively, the dynamics of this system is determined by the relation between the three branches of the cubic nullcline and the linear nullcline.

The cubic nullcline is defined by ${\displaystyle {\dot {v}}=0\leftrightarrow w=v-v^{3}/3+RI_{ext}}$.

The linear nullcline is defined by ${\displaystyle {\dot {w}}=0\leftrightarrow w=(v+a)/b}$.

In general, the two nullclines intersect at one or three points, each of which is an equilibrium point. At large values of ${\displaystyle v^{2}+w^{2}}$, far from origin, the flow is a clockwise circular flow, consequently the sum of the index for the entire vector field is +1. This means that when there is one equilibrium point, it must be a clockwise spiral point or a node. When there are three equilibrium points, they must be two clockwise spiral points and one saddle point.

• If the linear nullcline pierces the cubic nullcline from downwards then it is a clockwise spiral point or a node.
• If the linear nullcline pierces the cubic nullcline from upwards in the middle branch, then it is a saddle point.

The type and stability of the index +1 can be numerically computed by computing the trace and determinant of its Jacobian:

$${\displaystyle (tr,\det )=(1-b/\tau -v^{2},(v^{2}-1)b/\tau +1/\tau )}$$

The point is stable iff the trace is negative. That is, ${\displaystyle v^{2}>1-b/\tau }$.

The point is a spiral point iff ${\displaystyle 4\det -tr^{2}>0}$. That is, ${\displaystyle (\tau v^{2}-b-\tau )^{2}<4\tau }$.

The limit cycle is born when a stable spiral point becomes unstable by Hopf bifurcation.[1]

Only when the linear nullcline pierces the cubic nullcline at three points, the system has a separatrix, being the two branches of the stable manifold of the saddle point in the middle.

• If the separatrix is a curve, then trajectories to the left of the separatrix converge to the left sink, and similarly for the right.
• If the separatrix is a cycle around the left intersection, then trajectories inside the separatrix converge to the left spiral point. Trajectories outside the separatrix converge to the right sink. The separatrix itself is the limit cycle of the lower branch of the stable manifold for the saddle point in the middle. Similarly for the case where the separatrix is a cycle around the right intersection.
• Between the two cases, the system undergoes a homoclinic bifurcation.

Gallery figures: FitzHugh-Nagumo model, with ${\displaystyle a=0.7,\tau =12.5,R=0.1}$, and varying ${\displaystyle b,I_{ext}}$. (They are animated. Open them to see the animation.)

• 
  b = 0.8. The nullclines always intersect at one point. When the point is in the middle branch of the cubic nullcline, there is a limit cycle and an unstable clockwise spiral point.
• 
  b = 1.25. The limit cycle still exists, but for a smaller interval of I_ext. When there are three intersections in the middle, two of them are unstable spirals and one is an unstable saddle point.
• 
  b = 2.0. The limit cycle has disappeared, and instead we sometimes get two stable fixed points.
• 
  When ${\displaystyle b=2,I_{ext}=3.5}$, we can easily see the separatrix and the two basins of attraction by solving for the trajectories backwards in time.
• 
  When ${\displaystyle b=2.0}$, a homoclinic bifurcation event occurs around ${\displaystyle I_{ext}=5.393}$. Before the bifurcation, the stable manifold converges to the sink, and the unstable manifold escapes to infinity. After the event, the stable manifold converges to the sink on the right, and the unstable manifold converges to a limit cycle around the left spiral point.
• 
  After the homoclinic bifurcation. When ${\displaystyle b=2.0,I_{ext}=5.45}$, there is one stable spiral point on the left, and one stable sink on the right. Both branches of the unstable manifold converge to the sink. The upper branch of the stable manifold diverges to infinity. The lower branch of the stable manifold converges to a cycle around the spiral point. The limit cycle itself is unstable.

• FitzHugh–Nagumo model on Scholarpedia
• Interactive FitzHugh-Nagumo. Java applet, includes phase space and parameters can be changed at any time.
• Interactive FitzHugh–Nagumo in 1D. Java applet to simulate 1D waves propagating in a ring. Parameters can also be changed at any time.
• Interactive FitzHugh–Nagumo in 2D. Java applet to simulate 2D waves including spiral waves. Parameters can also be changed at any time.
• Java applet for two coupled FHN systems Options include time delayed coupling, self-feedback, noise induced excursions, data export to file. Source code available (BY-NC-SA license).