LNER Class EE1

Class EE1 (Electric Express 1)[1] was an electric locomotive commissioned by the North Eastern Railway in 1922. Ownership passed to the London and North Eastern Railway in 1923 and to British Railways in 1948.

North Eastern Railway EE1
Type and origin
Power typeElectric
BuilderNorth Eastern Railway Darlington Works
Build date1922
Total produced1
Specifications
Configuration:
  UIC2′Co2′
  Commonwealth2-Co-2
Gauge4 ft 8+12 in (1,435 mm) standard gauge
Driver dia.6 ft 8 in (2.032 m)
Loco weight110.05 long tons (111.82 t; 123.26 short tons)
Electric system/s1500 V DC Catenary
Current pickup(s)Pantograph, 2 off
Traction motors300 hp (224 kW) Metropolitan-Vickers, 6 off
Train heatingSteam generator
Train brakesVacuum
Performance figures
Power output1,800 hp (1,300 kW)
Tractive effort28,000 lbf (124.6 kN)
Career
Operators
NumbersNER: 13
LNER: 13; later 6999;
BR: 26600
Axle load classRoute availability 7
DispositionStored 1923–1950; scrapped 1950

It was an electrically powered locomotive in the pre-TOPS period.

Overview

In 1919 the North Eastern Railway made plans to electrify its York-Newcastle stretch of the East Coast Main Line and this locomotive was a prototype built for hauling passenger trains. It had an electrically heated boiler to generate steam for train heating.[2]

The wheels were arranged as in a 4-6-4 steam locomotive and the driving wheels were 6 ft 8 in (2.032 m) diameter. Each of the three driving axles was powered by a pair of traction motors. Electric locomotives of this design were common in continental Europe and the United States, but this was the only example on a British railway.

After grouping in 1923 the London and North Eastern Railway dropped the electrification project so (apart from some trials on the Shildon line) the locomotive was never used.[1] It survived into British Railways ownership but was withdrawn in August 1950, and scrapped on 15 December 1950.[1]

In common with other LNER electric locomotives, no classification was given to this locomotive until 4 October 1945, when no. 13 was classified EE1 (Electric Express 1).[1] In May 1946, no. 13 was renumbered to 6999; and under British Railways, it became no. 26600 in 1948.[1][3]

Specification

  • Numbers: (NER) 13; (LNER) 6999; (BR) 26600
  • Wheel arrangement: 2-Co-2
  • Introduced: 1922
  • Builder: North Eastern Railway
  • Motors: 6 x 300 hp (220 kW), Metropolitan-Vickers
  • Total power: 1,800 hp (1,342 kW)
  • Supply: 1,500 V DC overhead

Notes

  1. Boddy et al. (1990), p. 98.
  2. Semmens, Peter (1991). Electrifying The East Coast Route. ISBN 0-85059-929-6.
  3. Boddy et al. (1990), fig. 134.

References


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.