California Energy Code

The California Energy Code (also titled Building Energy Efficiency Standards for Residential and Nonresidential Buildings), called simply Title 24 in industry, is the sixth section of the California Building Standards Code. The code was created by the California Building Standards Commission in 1978 in response to a legislative mandate to reduce California's energy consumption. These standards are updated periodically by the California Energy Commission. The code includes energy conservation standards applicable to most buildings throughout California.[1]

"Title 24" redirects here. For the 24th book of the United States Code, see Title 24 of the United States Code.

The code's purpose is to advance the state's energy policy, develop renewable energy sources and prepare for energy emergencies. A 2020 study found that the 1978 energy code successfully reduced energy consumption, and that the implementation of the policy passed a cost-benefit test.[2]

History

California was the first state to implement minimum energy efficiency standards in 1974. It was the first to establish an energy regulation commission – the California Energy Commission. These regulations and codes have been in effect since 1974. California has the lowest per capita energy consumption in the US.[3]

Structure

The three general parts, which include all the responsibilities and criteria of the standards, are:

  • Mandatory requirements
  • Performance standards
  • Prescriptive standards

All buildings must follow the mandatory requirements. Performance standards vary by the building location and type.

These parts are designed to accomplish the following:

  • Forecast future energy need
  • Support energy and technology research
  • Develop renewable energy resources
  • Develop renewable transportation fuels and technologies

Climate zones
Climate zones in California

Standards vary based on climate zone. California is divided into 16 zones:[4]

  1. Arcata
  2. Santa Rosa
  3. Oakland
  4. San Jose
  5. Santa Maria
  6. Torrance
  7. San Diego
  8. Fullerton
  9. Burbank
  10. Riverside
  11. Red Bluff
  12. Sacramento
  13. Fresno
  14. Palmdale
  15. Palm Springs
  16. Blue Canyon

2019 Code

The 2019 California Energy Code became effective on January 1, 2020.[5] It focuses on such areas such as residential photovoltaic systems, thermal envelope standards and non-residential lighting requirements.

Homes built under this code are about 53% more energy efficient than those built to comply with the 2016 Energy Code.[6] This code provides a market for "smart" technologies.[7]

The 2019 Code added photovoltaic system requirements for low-rise residential buildings. Exceptions grant a reduction in size for photovoltaic systems.[8]

See also

References
  1. "2016 California Energy Code, Title 24, Part 6". Shop.ICCSafe.org. Retrieved September 8, 2018.
  2. Novan, Kevin; Smith, Aaron; Zhou, Tianxia (September 24, 2020). "Residential Building Codes Do Save Energy: Evidence from Hourly Smart-Meter Data". The Review of Economics and Statistics. 104 (3): 483–500. doi:10.1162/rest_a_00967. ISSN 0034-6535.
  3. "Power Hungry". Forbes.
  4. "2022 Reference Appendices" (PDF). Energy.ca.gov. California Energy Commission. August 2022. p. 33. Retrieved January 9, 2023.
  5. 2019 Building Energy Efficiency Standards, Frequently Asked Questions, California Energy Commission, March 2018
  6. "The California Energy Commission | EFFICIENCY DIVISION 2019: Building Energy Efficiency Standards" (PDF). California Energy Commission. March 2018. Retrieved April 25, 2019.
  7. "California Energy Code 2019 – Energy commission adopts standards requiring solar systems for new homes, First in Nation". California Energy Commission.
  8. "Blueprint California Energy Commission-Issue 123" (PDF). California Energy Commission.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.