Chevrolet Series CA Eagle / Master

The Chevrolet Series CA Eagle and Master is an American vehicle manufactured by Chevrolet in 1933 to replace the 1932 Series BA Confederate. The car was called "Eagle" early in the 1933 production year. When it was joined by the cheaper Chevrolet Standard Six (Series CC) later in February, 1933 the Eagle name was changed to "Master"[1]:5 to provide Chevrolet with a two-car range, and for the first time in ten years they manufactured two models on different wheelbases.[2] Starting in 1926, GM introduced the short lived General Motors companion make program where Oakland, Oldsmobile, Buick and Cadillac had "companion" models added to each division (Pontiac, Viking, Marquette and LaSalle, respectively). The only division that didn't get a "junior" brand was Chevrolet; instead, the lower-priced Standard series was introduced.[3]

Chevrolet Series CA Eagle / Master
Overview
ManufacturerChevrolet (General Motors)
Also calledMaster Eagle
Production450,435
Model years1933
Assembly
Body and chassis
Body style
  • 2-door roadster
  • 2-door coupe
  • 4-door sedan
  • 4-door tourer
LayoutFR layout
PlatformGM A platform
RelatedChevrolet Series CC Standard
Chevrolet Suburban
Pontiac Series 601
Powertrain
Engine206 cu in (3.4 L) OHV 6-cylinder
Dimensions
Wheelbase110 in (2,794.0 mm)
Curb weight2,675–2,880 lb (1,213–1,306 kg)
Chronology
PredecessorChevrolet Series BA Confederate
SuccessorChevrolet Series DA Master

The Series CA sold a combined 450,435 vehicles, an increase of nearly 140,000 over the previous year's Series BA sales of 313,395, and ensured that Chevrolet was able to retain their number one spot in American car sales. The Series CA saw the end of two-seater cars from Chevrolet, and the new Town Sedan included an integral trunk.

1933 Chevrolet trucks at Yellowstone

There are several differences between the Eagle and Master. The easiest way to distinguish between the two is the post between the front door vent windows and the roll down windows. On the Eagle the chrome divider between these two windows goes down as the window goes down, whereas on the Master this divider remains fixed and does not go down with the window. The Series CA's wheelbase increased an inch to 110 in (2,794.0 mm) compared to the Series BA, and was three inches longer than the new Series CC Standard.[1]

The engine powering the Series CA was a new, larger 206 cu in (3,380 cc) version of the "Stovebolt Six", producing 65 hp (48 kW) @ 2800 rpm and 146 lb•ft @ 1000-1800 rpm.[4][1]:61 A smaller 181 cu in (2,970 cc) six-cylinder was used in the Standard, producing 60 hp (45 kW).

GM also used the Eagle chassis and platform for trucks branded as both Chevrolet and GMC. In May of 1925 the Chevrolet Export Boxing plant at Bloomfield, New Jersey was repurposed from a previous owner where Knock-down kits for Chevrolet, Oakland, Oldsmobile, Buick and Cadillac passenger cars, and both Chevrolet and GMC truck parts were crated and shipped by railroad to the docks at Weehawken, New Jersey for overseas GM assembly factories.[3]

See also

References

  1. "Standard Chevrolet 1933 Engineering Information" (PDF). General Motors Heritage Center.
  2. "1933 Chevrolet Eagle and Mercury". How Stuff Works. Archived from the original on 5 November 2012. Retrieved 3 January 2013.
  3. Kimes, Beverly R. (1996). Clark, Henry A. (ed.). The Standard Catalog of American Cars 1805-1945. Kraus Publications. pp. 283–302. ISBN 0873414780.
  4. "1933 Chevrolet Master Eagle Series CA Cabriolet". Bonhams. Retrieved 3 January 2013.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.