Chrysler minivans (S)

LE-trim Chrysler minivan rear seats (1984-1986)

Designed as an alternative to full-size station wagons, the standard-length Dodge Caravan/Plymouth Voyager (two inches shorter and two inches wider than a K-car station wagon), presented nearly double the cargo space of a K-car station wagon with a 7-foot long cargo floor.[4] Similar to the K-car station wagons, the minivans use a liftgate rear door (supported by gas struts), unlocked by key.

Several seating configurations were offered, depending on trim level. The standard configuration of five-passenger seating in two rows was included with seven or eight-passenger seating in three rows; the back two seats were two-passenger and three-passenger bench seats (in the style of a larger van, these latched to the floor). The more popular two-passenger configuration was offered in several configurations, with low-back seats (as the minivan was technically a light truck), or high back seats with headrests; depending on trim level, seats could have vinyl, "deluxe" cloth or vinyl, or "luxury" cloth/vinyl upholstery. Two styles of rear seats were offered. The three-passenger rear bench was adjustable for passenger legroom or cargo space; the seatback also folded down when not in use.[4] In 1985, a five-passenger version was introduced with a fold-flat rear seat; called "Convert-a-bed", the option allowed the rear seat to fold backwards into a bed. The Convert-a-bed was also available paired with the front bench seat.[4]

To lower production and development costs of the Chrysler minivans, the vehicles maintained a high degree of visible parts commonality with other Chrysler vehicles, sharing wheel covers, door handles, instrument panels, and other visible trim pieces with the Aries/Reliant and other Chrysler vehicles.[4] As the design of the dashboard precluded a conventional glove box, Chrysler added a large storage drawer underneath the passenger seat (a feature retained in later generations of Chrysler minivans and the Chrysler PT Cruiser).[4] The minivans also became the first automobiles ever with modern cup holders.[5][6]

At their 1984 launch, as with the K-Cars, the Dodge Caravan and Plymouth Voyager were externally distinguished largely by their grilles. Both vehicles were fitted with four headlights, with the Caravan fitted with an eggcrate grille while the Voyager was fitted with a horizontally-oriented grille. In what would become a signature styling feature of 1980s Chrysler minivans, top-trim Caravans and Voyagers were both offered with simulated woodgrain as an option.

In following with many other Chrysler vehicles, for 1986, Chrysler minivans shifted from 4-lug to 5-lug wheels. To reduce high-speed wind noise, Chrysler added a bumper-mounted air dam.[4]

• 
  1984 Dodge Caravan LE at Walter P. Chrysler Museum
• 
  1984-1985 Plymouth Voyager SE

The 1987 model year saw a mid-cycle update to the S-platform minivans. Largely centered around the May 1987 introduction of the Grand Caravan and Grand Voyager, the update brought a new front fascia and taillights. To better differentiate the Caravan from the Voyager, the model lines received different grilles; all models except the Mini Ram Van (cargo van) were shifted to flush-lens composite headlamps. Fourteen inches longer in length than a standard-wheelbase Chrysler minivan, the Grand Caravan/Grand Voyager was the largest minivan in North America in 1987. The first Chrysler minivans fitted with a V6 engine, the Grand Caravan/Grand Voyager eventually became the two most popular configurations.[4] With both rear seats removed, the "Grand" minivans offered 150 cubic feet of cargo room, 25 extra than a standard wheelbase Chrysler minivan.[4]

The front bench seat and Convert-A-Bed, both seldom ordered, did not return for 1987. Interior upholstery was upgraded on several trims, with base vinyl seats removed (and deluxe vinyl remaining as an option on SE trim); for the first time, leather seating was offered on LE/Grand LE trim.

For 1989, the minivans saw a minor update. To improve fit and finish, Chrysler redesigned the front and rear bumpers, with single-piece bumper covers, painted to match the color of the body. The early-1980s K-Car steering wheel was replaced by a 3-spoke design (though the rest of the dashboard remained unchanged). In addition to the standard trim levels, Chrysler added the top-line Dodge Caravan ES and Plymouth Voyager LX; as an early 1990 model, the Chrysler Town & Country luxury minivan was introduced in early 1989.

• 
  1987-1988 Plymouth Grand Voyager SE V6
• 
  1990 Plymouth Voyager LE V6
• 
  1987-1988 Dodge Caravan
• 
  1987-1988 Dodge Caravan SE V6
• 
  1989-1990 Dodge Grand Caravan LE V6

The first-generation Chrysler minivans are based upon the Chrysler S platform, using unibody construction. Contrary to popular belief, the S platform is not directly related to the K platform;[2][4] though sharing powertrains to lower development and production costs, the S platform has a distinct body structure, allowing for a higher hoodline and seat height.[2] The S platform is produced in two wheelbases: 112.1 inches for standard-length minivans; 119.1 inches for "Grand"-length minivans.

Adapting the layout of the K platform for a larger vehicle, the S-platform vans were fitted with MacPherson strut front suspension and a beam rear axle with leaf springs.[4] All S-platform minvans are fitted with front disc and rear drum brakes.[4]

For the first three years of production, two engines were offered – both inline-4 engines with two-barrel carburetors. The base 2.2 L was borrowed from the Chrysler K-cars, and produced 96 hp (72 kW) horsepower. The higher performance fuel-injected version of the 2.2 L engine later offered in the K-cars was never offered in the Caravan, and the 2-bbl version would remain the base power plant until mid-1987. Alongside the 2.2 L, an optional Mitsubishi 2.6 L engine was available, producing 104 hp (78 kW).

Fender badge originally used on V6 equipped minivans

In mid-1987, the base 2.2 L inline-four engine was replaced with a fuel-injected 2.5 L inline-four, which produced 100 hp (75 kW), while the Mitsubishi G54B I4 was replaced with a new fuel-injected 3.0 L Mitsubishi V6 producing 136 hp (101 kW) in March of that year.

Shortly thereafter, in model year 1989, a more powerful engine became optional: a turbocharged version of the 2.5 L I4 producing 150 hp (112 kW). Revisions to the Mitsubishi V6 increased its output to 142 hp (106 kW), and a new 150 hp (110 kW) 3.3 L V6 was added to the option list in model year 1990. The V6 engines became popular as sales of the 2.5 turbo dwindled, and it was dropped at the end of the year.

Neither the 3.3 L V6 engine nor the turbocharged four were available on the European Chrysler Voyager. The Chrysler Town & Country was only available with one engine option, the Mitsubishi 3.0 L V6, which was later upgraded to the newly introduced 3.3 L V6 during its production run.[7]

Both a three-speed TorqueFlite A413 automatic transmission and a five-speed manual were available with most inline-4 engines, including the turbocharged 2.5 L (this was a rare combination). Manual transmissions were not available on 2.6 L Mitsubishi 4-cylinder models nor V6 models of the passenger Caravan, but were an option on the Mini Ram Van and Caravan C/V's long wheelbase models with a 3.0 L V6.

V6 engines were only offered with the fully hydraulically operated TorqueFlite until the computer controlled Ultradrive 4-speed automatic became available in 1989. The Ultradrive offered much better fuel economy and responsiveness, particularly when paired with the inline-4 engine. However, it suffered from reliability problems, usually stemming from what is known as "gear hunt" or "shift busyness", resulting in premature wear of the internal clutches. It also required an uncommon type of automatic transmission fluid and is not clearly labeled as such, leading many owners to use the more common Dexron II rather than the specified "Mopar ATF+3", resulting in transmission damage and eventual failure.

The Ultradrive received numerous design changes in subsequent model years to improve reliability, and many early model transmissions would eventually be retrofitted or replaced with the updated versions by dealers, under warranty. These efforts were mostly successful, and most first-generation Caravans eventually got an updated transmission.

The S-platform Dodge Caravan and Plymouth Voyager were both offered in three trim levels, an unnamed base trim level, mid-range SE, and top-range LE; LE-trim minivans were marketed with the option of simulated woodgrain paneling. In 1989, as part of a minor exterior update, Dodge and Plymouth each gained an additional trim level for the top of the model range, the Dodge Caravan ES and Plymouth Voyager LX, available only in standard-wheelbase configuration. The Chrysler Town & Country was only offered in a single unnamed trim level.

1989-1990 Dodge Caravan C/V

Chrysler produced two cargo van variants of the S platform, both based upon the Dodge Caravan. From 1984 to 1988, Dodge marketed the Mini Ram Van. Distinguished by a "Ram" nameplate under the side-view mirror, the Mini Ram Van was renamed the Caravan C/V (Cargo Van) for 1989. In contrast to passenger vans, the Caravan C/V was fitted with model-specific headlight clusters, using dual sealed-beam headlamps (shared with the export Chrysler Voyager). Several window configurations were available, ranging from either no windows to a full set of windows. Coinciding with the 1987 introduction of the Grand Caravan, cargo van production expanded to both wheelbases.

On the Caravan C/V, in addition to the liftgate rear door, Chrysler offered 50/50 split rear doors (similar to the Chevrolet Astro and traditional cargo vans). Produced as an option, the 50/50 doors were constructed of fiberglass; custom-installed by an outside vendor, the doors were installed between the factory and shipment to a dealer.

As with the larger Dodge Ram Van, the Mini Ram Van and Caravan C/V also served as a basis for conversion vans, sold through Chrysler dealers as well as through converters themselves.

1989-1990 Chrysler Voyager

Starting for the 1988 model year, Chrysler began exports of minivans to Europe.[4] As neither the Plymouth nor the Dodge brands were marketed outside of North America by Chrysler, minivans were exported under the Chrysler Voyager nameplate, competing against the Renault Espace and Volkswagen Transporter/Caravelle (sold as the Vanagon in North America).

While the Voyager name was derived from the Plymouth division, the Chrysler Voyager was a rebranded version of the Dodge Caravan, fitted with the front fascia of the Caravan C/V cargo van. To accommodate the vehicle for European sale, the Chrysler Voyager was fitted with amber turn signal lenses (requiring new taillights), turn signal repeaters, and a model-specific license plate surround (adapted for European license plates and embossed with "Chrysler").

Along with its rebranding, the Chrysler Voyager saw internal modifications, largely to comply with European safety and emissions regulations. With the exception of the turbocharged 2.5 L I4 and 3.3 L V6, the Chrysler Voyager shared its powertrain with its North American counterpart; many examples were produced with manual transmissions.

1990 Chrysler Town & Country

After being discontinued in the 1988 model year, the Chrysler Town & Country nameplate was revived as Chrysler released a minivan for its namesake division. Introduced in the spring of the 1989 as an early 1990 model, the Town & Country was released as the highest-trim version of the three Chrysler minivans, sold exclusively in the long-wheelbase body length. Originally slated for a 1989 release,[8] the Town & Country was the first of the three minivans produced as a 1990 model.

Designed as a competitor to luxury-themed minivans such as the Ford Aerostar Eddie Bauer and the (then-upcoming) Oldsmobile Silhouette, the Town & Country included nearly every feature of the Dodge Caravan and Plymouth Voyager as standard equipment, with a number of trim features of its own. All examples were produced with woodgrain trim (a feature associated with the nameplate). Initially, Bright White Clearcoat was the sole color available, with Black Clearcoat added as an option in June 1989 (as 1990 Caravans/Voyagers entered production[9]).

To externally distinguish the Town & Country, Chrysler added a chrome waterfall grille (styled similar to the Chrysler New Yorker), clear-lens turn front turn signals, body-color mirrors, a crystal Pentastar hood ornament (shared with the New Yorker/Fifth Avenue), lower body trim (a monochromatic, long-wheelbase version of the Dodge Caravan ES body trim), and 15" alloy wheels[10] (later used with the Plymouth Voyager LX and other Plymouth models). The interior featured model-specific leather seating, leather interior trim panels, all available power-operated equipment, front and rear air conditioning, and an Infinity II sound system.

Depending on production date, the 1990 Chrysler Town & Country was produced with one of two V6 engines. It was originally fitted with the 142 hp 3.0L Mitsubishi V6 used across Chrysler's model line. This was later upgraded to Chrysler's own 150 hp 3.3L V6 as a running change during production. Although all S-platform Town & Country minivans have 1990 VINs, the EPA classifies examples with the 3.0L V6 as 1989 vehicles.[11] Both engines were paired with the 4-speed Ultradrive automatic transmission.

In total, 5,404 examples of the Chrysler Town & Country were produced, making this variant the rarest of all Chrysler minivans.[12]