Closed system

A closed system is a natural physical system that does not allow transfer of matter in or out of the system, although – in the contexts of physics, chemistry, engineering, etc. – the transfer of energy (e.g. as work or heat) is allowed.

Physics

In classical mechanics

In nonrelativistic classical mechanics, a closed system is a physical system that doesn't exchange any matter with its surroundings, and isn't subject to any net force whose source is external to the system.[1][2] A closed system in classical mechanics would be equivalent to an isolated system in thermodynamics. Closed systems are often used to limit the factors that can affect the results of a specific problem or experiment.

In thermodynamics

Properties of isolated, closed, and open systems in exchanging energy and matter

In thermodynamics, a closed system can exchange energy (as heat or work) but not matter, with its surroundings. An isolated system cannot exchange any heat, work, or matter with the surroundings, while an open system can exchange energy and matter.[3][4][5][6][7][8][9] (This scheme of definition of terms is not uniformly used, though it is convenient for some purposes. In particular, some writers use 'closed system' where 'isolated system' is used here.[10][11])

For a simple system, with only one type of particle (atom or molecule), a closed system amounts to a constant number of particles. However, for systems which are undergoing a chemical reaction, there may be all sorts of molecules being generated and destroyed by the reaction process. In this case, the fact that the system is closed is expressed by stating that the total number of each elemental atom is conserved, no matter what kind of molecule it may be a part of. Mathematically:

\sum _{j=1}^{m}a_{ij}N_{j}=b_{i}

where $N_{j}$ is the number of j-type molecules, $a_{ij}$ is the number of atoms of element $i$ in molecule $j$ and $b_{i}$ is the total number of atoms of element $i$ in the system, which remains constant, since the system is closed. There will be one such equation for each different element in the system.

In thermodynamics, a closed system is important for solving complicated thermodynamic problems. It allows the elimination of some external factors that could alter the results of the experiment or problem thus simplifying it. A closed system can also be used in situations where thermodynamic equilibrium is required to simplify the situation.

In quantum physics

This equation, called Schrödinger's equation, describes the behavior of an isolated or closed quantum system, that is, by definition, a system which does not interchange information (i.e. energy and/or matter) with another system. So if an isolated system is in some pure state |ψ(t) ∈ H at time t, where H denotes the Hilbert space of the system, the time evolution of this state (between two consecutive measurements).[12]

$i\hbar {\frac {\partial }{\partial t}}\Psi (\mathbf {r} ,t)={\hat {H}}\Psi (\mathbf {r} ,t)$

where $i$ is the imaginary unit, $ħ$ is the Planck constant divided by $2π$ , the symbol $.mw-parser-output .sfrac{white-space:nowrap}.mw-parser-output .sfrac.tion,.mw-parser-output .sfrac .tion{display:inline-block;vertical-align:-0.5em;font-size:85%;text-align:center}.mw-parser-output .sfrac .num,.mw-parser-output .sfrac .den{display:block;line-height:1em;margin:0 0.1em}.mw-parser-output .sfrac .den{border-top:1px solid}.mw-parser-output .sr-only{border:0;clip:rect(0,0,0,0);height:1px;margin:-1px;overflow:hidden;padding:0;position:absolute;width:1px}∂/∂t$ indicates a partial derivative with respect to time $t$ , $Ψ$ (the Greek letter psi) is the wave function of the quantum system, and $Ĥ$ is the Hamiltonian operator (which characterizes the total energy of any given wave function and takes different forms depending on the situation).

In chemistry

In chemistry, a closed system is where no reactants or products can escape, only heat can be exchanged freely (e.g. an ice cooler). A closed system can be used when conducting chemical experiments where temperature is not a factor (i.e. reaching thermal equilibrium).

In engineering

In an engineering context, a closed system is a bound system, i.e. defined, in which every input is known and every resultant is known (or can be known) within a specific time.

References

Rana, N.C.; P.S. Joag (1991). Classical Mechanics. p. 78. ISBN 978-0-07-460315-4.
Landau, L.D.; E.M. Lifshitz (1976). Mechanics (third ed.). p. 8. ISBN 978-0-7506-2896-9.
Prigogine, I., Defay, R. (1950/1954). Chemical Thermodynamics, Longmans, Green & Co, London, p. 66.
Tisza, L. (1966). Generalized Thermodynamics, M.I.T Press, Cambridge MA, pp. 112–113.
Guggenheim, E.A. (1949/1967). Thermodynamics. An Advanced Treatment for Chemists and Physicists, (1st edition 1949) 5th edition 1967, North-Holland, Amsterdam, p. 14.
Münster, A. (1970). Classical Thermodynamics, translated by E.S. Halberstadt, Wiley–Interscience, London, pp. 6–7.
Haase, R. (1971). Survey of Fundamental Laws, chapter 1 of Thermodynamics, pages 1–97 of volume 1, ed. W. Jost, of Physical Chemistry. An Advanced Treatise, ed. H. Eyring, D. Henderson, W. Jost, Academic Press, New York, lcn 73–117081, p. 3.
Tschoegl, N.W. (2000). Fundamentals of Equilibrium and Steady-State Thermodynamics, Elsevier, Amsterdam, ISBN 0-444-50426-5, p. 5.
Silbey, R.J., Alberty, R.A., Bawendi, M.G. (1955/2005). Physical Chemistry, fourth edition, Wiley, Hoboken NJ, p. 4.
Callen, H.B. (1960/1985). Thermodynamics and an Introduction to Thermostatistics, (1st edition 1960) 2nd edition 1985, Wiley, New York, ISBN 0-471-86256-8, p. 17.
ter Haar, D., Wergeland, H. (1966). Elements of Thermodynamics, Addison-Wesley Publishing, Reading MA, p. 43.
Rivas, Ángel; F. Huelga, Susana (October 2011). Open Quantum Systems. Berlin Heidelberg: Springer-Verlag. ISBN 978-3-642-23354-8.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[1] Rana, N.C.; P.S. Joag (1991). Classical Mechanics. p. 78. ISBN 978-0-07-460315-4.

[2] Landau, L.D.; E.M. Lifshitz (1976). Mechanics (third ed.). p. 8. ISBN 978-0-7506-2896-9.

[3] Prigogine, I., Defay, R. (1950/1954). Chemical Thermodynamics, Longmans, Green & Co, London, p. 66.

[4] Tisza, L. (1966). Generalized Thermodynamics, M.I.T Press, Cambridge MA, pp. 112–113.

[5] Guggenheim, E.A. (1949/1967). Thermodynamics. An Advanced Treatment for Chemists and Physicists, (1st edition 1949) 5th edition 1967, North-Holland, Amsterdam, p. 14.

[6] Münster, A. (1970). Classical Thermodynamics, translated by E.S. Halberstadt, Wiley–Interscience, London, pp. 6–7.

[7] Haase, R. (1971). Survey of Fundamental Laws, chapter 1 of Thermodynamics, pages 1–97 of volume 1, ed. W. Jost, of Physical Chemistry. An Advanced Treatise, ed. H. Eyring, D. Henderson, W. Jost, Academic Press, New York, lcn 73–117081, p. 3.

[8] Tschoegl, N.W. (2000). Fundamentals of Equilibrium and Steady-State Thermodynamics, Elsevier, Amsterdam, ISBN 0-444-50426-5, p. 5.

[9] Silbey, R.J., Alberty, R.A., Bawendi, M.G. (1955/2005). Physical Chemistry, fourth edition, Wiley, Hoboken NJ, p. 4.

[10] Callen, H.B. (1960/1985). Thermodynamics and an Introduction to Thermostatistics, (1st edition 1960) 2nd edition 1985, Wiley, New York, ISBN 0-471-86256-8, p. 17.

[11] ter Haar, D., Wergeland, H. (1966). Elements of Thermodynamics, Addison-Wesley Publishing, Reading MA, p. 43.

[12] Rivas, Ángel; F. Huelga, Susana (October 2011). Open Quantum Systems. Berlin Heidelberg: Springer-Verlag. ISBN 978-3-642-23354-8.