Corbara Dam
The Corbara Dam is located on the River Tiber near Corbara in the province of Terni in the Umbria region of Italy. It is a combination gravity and embankment dam. The gravity section forms the spillway while the embankment section adjoins on the left side. The dam was constructed between 1959 and 1963 for the primary purpose of hydroelectric power generation but it was later found to useful in preventing floods in Rome downstream.[1] The reservoir created by the dam, Lake Corbara, supplies water to the expansive Terni Hydroelectric Complex. The complex has an installed capacity of 531 MW and is owned by Enel.[2]
Corbara Dam | |
---|---|
Location of Corbara Dam in Italy | |
Official name | Diga di Corbara |
Country | Italy |
Location | Corbara, Terni, Umbria |
Coordinates | 42°42′11.30″N 12°13′50.93″E |
Purpose | Power, flood control |
Status | Operational |
Construction began | 1959 |
Opening date | 1963 |
Owner(s) | Enel |
Dam and spillways | |
Type of dam | Gravity with embankment section |
Impounds | River Tiber |
Height | 52 m (171 ft) |
Length | 640 m (2,100 ft) |
Reservoir | |
Creates | Lake Corbara |
Total capacity | 190,000,000 m3 (150,000 acre⋅ft) |
Active capacity | 135,000,000 m3 (109,000 acre⋅ft) |
Catchment area | 6,042 km2 (2,333 sq mi) |
Terni Hydroelectric Complex | |
Turbines | 38 |
Installed capacity | 531 MW |
References
- "Hypothesis for the regulation of outflows for the purpose of Government of floods in the basin of the Tiber" (PDF) (in Italian). Authorities 'Of River Basin Tevere. 27 February 2004. Retrieved 7 April 2014.
- "Terni". E.ON Italia. Archived from the original on 8 April 2014. Retrieved 7 April 2014.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.