New Caledonian crow

This species uses stick tools in the wild by finding small twigs and probing them into holes in logs to extract insects and larvae.[2] New Caledonian crows are also able to manufacture tools by breaking twigs off bushes and trimming them to produce functional stick tools.[2] Tool manufacture is rare in comparison to simple tool use and indicates a higher level of cognitive function. The crows can also make leaf tools by tearing rectangular strips off the edges of Pandanus spp. leaves.[8] The creation of such leaf tools allows these crows to exploit naturally occurring hooks – the barbs running along the edges of these leaves can be used as hooks if the tool is held such that the barbs point towards the crows’ head. Other naturally occurring hooks are also incorporated within tools, such as the thorns that grow on vine species in New Caledonia.[8] These crows create hooks by crafting both wood and ferns into hooks.[8] This is done by trimming the junctions between two branches or fern stolons into a tick shape (i.e. one junction has a long piece of wood/stolon attached, one junction has a small piece of wood /stolon attached) and then removing material from this junction to create a functioning hook. This imposition of three-dimensional form onto a natural material resembles carving.

This species has a particular method for crafting tools:

Crows snip into the leaf edges and then tear out neat strips of vegetation with which they can probe insect-harboring crevices. These tools have been observed to come in three types: narrow strips, wide strips and multi-stepped strips—which are wide at one end and, via a manufacturing process that involves stepwise snips and tears, become narrow at the opposite end.[9]

The New Caledonian crow is the only non-primate species for which there is evidence of cumulative cultural evolution in tool manufacture. That is, this species appear to have invented new tools by modifying existing ones, then passing these innovations to other individuals in the cultural group. Gavin R. Hunt and colleagues at the University of Auckland studied tools the crows make out of pandanus (or screw pine) leaves. Observations of the distribution of 5,500 leaf counterparts or stencils left behind by the cutting process suggest that the narrow and the stepped tools are more advanced versions of the wide tool type. "The geographical distribution of each tool type on the island suggests a unique origin, rather than multiple independent inventions". This implies that the inventions, which involve a delicate change in the manufacturing process, were being passed from one individual to another.[8]

The New Caledonian crow also spontaneously makes tools from materials it does not encounter in the wild. In 2002, researcher Alex Kacelnik and colleagues at the University of Oxford observed of a couple of New Caledonian crows called Betty and Abel:

Betty's toolmaking abilities came to light by accident during an experiment in which she and Abel had to choose between a hooked and a straight wire for retrieving small pieces of pig heart, their favorite food. When Abel made off with the hooked wire, Betty bent the straight wire into a hook and used the tool to lift a small bucket of food from a vertical pipe. This experiment was the first time the crows had been presented with wire.[10]

This observation was further investigated in a series of studies. Out of ten successful retrievals, Betty bent the wire into a hook nine times. Abel retrieved the food once, without bending the wire.[3] The process would usually start with Betty trying to get the food bucket with the straight wire, but then she would make a hook from it bending it in different ways, usually by snagging one end of the wire under something, and then using the bent hook to pick up the tray.

Clearly, Betty's creation of hooks cannot be attributed to the shaping or reinforcement of trial-and-error behavior. In 2004, Hunt observed the crows in the wild also making hooks, but the adaptation to the new material of the wire was clearly novel and appeared purposeful. Intentional tool manufacture, even if it is generalizing a prior experience to a novel context, is rare in the animal world.

These crows also use tools to investigate potentially dangerous objects, such as a rubber snake or a flashing LED bike light.[11]

Meta-tool use is using one tool on another tool to achieve the objective of the task. It is generally considered to be a behaviour requiring more complex cognitive ability than the use of just a single tool. Studies show that New Caledonian crows are capable of meta-tool use, at a level rivalling the best performances seen in primates.[12][13][14]

One such study involved putting food in a box out of the crows' reach. The crows were given a stick that was too short to reach the food. However, this short stick could be used to retrieve a longer stick from another box, which could then be used to retrieve the food. This complex behaviour involved the crow realising that a tool could be used on non-food objects, and suppressing the urge to go directly for the food. It was solved by six of seven birds on the first attempt. This behaviour had previously only been observed in primates.

In a study conducted at the Max Planck Society crows have been shown to create compound tools from 2–4 short branches that could be slotted together.[15]

New Caledonian crows have shown they are able to process information from mirrors, a cognitive ability possessed by only a small number of species. By using a mirror, wild-caught New Caledonian crows are able to find objects they cannot see with a direct line of sight. However, the crows were unable to recognise themselves in the mirror – other corvids have tested positive for this capability.[16]