Dallara F308

The Dallara F308 is an open-wheel formula racing car, designed, developed built by Italian manufacturer Dallara, for Formula Three racing categories, in 2008. It was used in different Formula Three racing categories and competitions between 2008 and 2011. It was later replaced and succeeded by the F312, in 2012.[4][5]

Dallara F308
Dallara F309
Dallara F310
Dallara F311
CategoryFormula Three
ConstructorDallara
Designer(s)Luca Pignacca
Andrea Toso
Jos Claes
PredecessorDallara F307
SuccessorDallara F312
Technical specifications[1]
ChassisCarbon fibre monocoque
Suspension (front)Pushrod with twin-damper system and torsion-bar springs
Suspension (rear)Pushrod with twin-damper system and coils springs
Length4,264 mm (168 in)
Width1,835 mm (72 in) including tyres
Height950 mm (37 in)
Axle track1,585 mm (62 in) (front)
1,535 mm (60 in) (rear)
Wheelbase2,730 mm (107 in)
EngineVarious manufacturers (Mercedes-Benz HWA, Spiess-Volkswagen, TOM's-Toyota, Spiess-Opel, Sodemo-Renault)[2] 2.0 L (122 cu in) inline-4 engine naturally-aspirated, longitudinally mounted in a mid-engined, rear-wheel drive layout
TransmissionHewland 6-speed sequential
Power217 hp (162 kW)[3]
Weight570 kg (1,257 lb) including driver
FuelVarious unleaded control fuel
LubricantsVarious
BrakesCarbon brake discs, 6-piston calipers and pads
TyresVarious OZ 9”front & 10.5”rear
Competition history
Debut2008

Versions

The F308 can be upgraded to either the F309, the F310, or the F311, through Dallara's annual add-on kits. These include modifications in the area of aerodynamics such as additional air deflectors or similar or improved suspension units.[6]

The car

The F308 is a conventional Formula 3 racing car with a carbon fiber reinforced plastic monocoque, load-bearing mid-engined, and free-standing wheels. The Hewland FTR and the Pankl DGB03 gearbox are homologated for the car. It is shifted manually by means of ignition interruption and shift lever on the right side without the clutch. The front and rear wing elements, the front, and rear crash boxes, and the wheel carriers are also homologated. The bodywork can be done by the teams themselves. For example, the chimneys on the sidepods were removed from all teams in the Euroseries and the sidepods were laminated shut.[6][7][8]

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.