Dodge Lancer

1961 Dodge Lancer 770 Station Wagon

1962 Dodge Lancer 170 2-Door Sedan

1962 Dodge Lancer GT 2-Door Hardtop

1962 Dodge Lancer 770 station wagon rear view

The Lancer wheelbase and body shell were identical to those of the Valiant, but interior and exterior trim were more upscale for the Lancer. Lancers featured round taillights and a full-width grille, instead of the Valiant's cat's-eye taillights and central grille. For 1961, trim levels were the basic "170" and the premium "770". During 1961, the two-door hardtop was marketed as the "Lancer 770 2-Door Hardtop".[1] For the 1962 model year, the hardtop was marketed as the "GT 2-Door Hardtop" and carried premium trim. Two-tone paint was available and instead of the front bench seat, there were two bucket seats. Also for the 1962 model, "Lancer GT" medallions were mounted on the doors' interior trim panels below the vent window and on the sides of the front fenders just aft of the headlamps. "GT" emblems were placed on the hood, the deck lid, and on the vinyl dash pad. The headlamp bezels and the grille's horizontal slats were blacked-out. The GT also lacked certain ornamentation found on the 170s and 770s such as the "Lancer" door scripts, the slanted chrome hash marks on the lower quarter panel, and the hook-ended stainless steel door-to-fender spears.

The Lancer used the slant-6 engine. The base engine was the 170 cu in (2.8 L) unit, rated at 101 bhp (75 kW). The optional power package consisted of the larger 225 cu in (3.7 L) engine, rated at 145 bhp (108 kW). After the start of the 1961 model year, a die-cast aluminum version of the 225 engine block was made available. The aluminum 225 weighed 45 lb (20 kg) less than the iron 170 and 80 lb (36 kg) less than the iron 225. Any of the available engines could be equipped at the dealer with Chrysler's Hyper Pak parts kit for a significant power upgrade: the 170 Hyper Pak's published output was 148 bhp (110 kW), while the 225 Hyper Pak's was 196 bhp (146 kW). The Hyper-Pak shaved more than four seconds off the 0 to 60 mph (97 km/h) time versus the standard 225, and was over a second quicker and seven miles per hour faster in the quarter mile.[3] With the Hyper Pak, a 225 Lancer could go from 0 to 60 mph (97 km/h) in 8.6 seconds and turn in a standing quarter-mile time of 16.4 seconds.[4] 1962 cars had the engine and transmission moved for a flatter front floor.[5]

Transmission options were a Chrysler-built A903 three-speed manual with the shifter on the floor in 1961 and on the steering column in 1962, or a pushbutton-operated A904 Torqueflite three-speed automatic.

In the 1962 NHRA Winternationals, Wayne Weihe won the C/FX (Factory Experimental) class with a Hyper-Pak-equipped Lancer, clocking a 15.67 E.T.[3] Although the bigger Dodges were beginning to appear at drag strips around the country, the "Golden Lancer" of Dode Martin and Jim Nelson was one of the fastest compacts on the strips in 1962. The engine was a 413 cu in (6.77 liters) Chrysler RB V8 engine modified by the Chrysler engineers' "Ramchargers" racing team. The Golden Lancer raced successfully in A/FX class and could do the quarter-mile in 12.68 seconds at 113 mph (182 km/h).[4]

Lancer sales did not meet expectations and sold about half as well as the Valiant. As a late part of the total redesign of Dodge's compact car for 1963, the Lancer name was discontinued. Dodge compacts for 1963 through 1976 were named Dart, a name that had previously been assigned to a larger car produced by Dodge from 1960 through 1962.

In South Africa, a right hand drive version of the Lancer was sold from 1961 through 1963, badged as the DeSoto Rebel not long after the DeSoto name was discontinued in the U.S. All were equipped with the 170 cu in (2.8 L) Slant 6 engine, and most had the three-speed manual transmission. As with the Australian RV1 and SV1 Valiants, the DeSoto Rebel used the instrument cluster from the U.S. 1961 Plymouth Valiant. White reflectors were mounted to the front bumper, in compliance with South African vehicle equipment regulations.

The Rebel name was re-introduced by Chrysler South Africa in 1967 as the economy-priced "Valiant Rebel".

1987 Lancer Shelby

A special version was available for the 1987 as the Shelby Lancer which was built by Shelby Automobiles in Whittier, California. A total of 800 units were produced with half featuring a 5-speed manual transmission and cloth seats while 400 were equipped with a 3-speed automatic transmission and leather upholstery.[6]

Along with some Shelby-themed trim changes, the cars included a modified suspension as well as 4-wheel disc brakes and CD player which were an advanced features for the time.[6][7]

Chrysler took over production starting with the 1988 model year, building them in the same Sterling Heights plant as regular Lancers. The "Dodge Lancer Shelby" featured appearance and handling modifications.[7] These included upgraded sway bars, shorter springs, and quicker steering along with other comfort and convenience features such as leather seats, power locks, windows, seats and mirrors, a tilt steering wheel, and a two-position cup holder.

The intercooled Turbo II engine with the manual transmission provided 175 hp (130 kW). The automatic variant was equipped with the 146 hp (109 kW) Turbo I.[6] Some of the suspension modifications were included as the 1987 Shelbys, but the rear disk brakes were discontinued in favor of the regular Lancer's rear drums.[6] Although it was not planned as a limited edition, 279 Lancer Shelbys were produced in 1988 and 208 in 1989 for a total of 487 units.[7]

In April 1988, Chrysler started offering some models on the European market. One of them was the "Chrysler GTS", a rebadged version of the Dodge Lancer ES. Due to European vehicle regulations, the exterior appearance was slightly different. The rear turn signals were amber rather than red, the front sidemarkers and the centre high mount stop lamp (CHMSL) were blanked off, small round repeaters were installed into the front fenders and the sideview mirrors were of spring-hinged rather than rigid design. The engine options included the naturally aspirated 2.2 L (134 cu in) Four, and a turbocharged version of the same engine. From 1989 on, the 2.5 L (153 cu in) Four became available with or without a turbocharger. The 2.2 engine was dropped, except for the Turbo II version that was standard equipment on the Chrysler GTS Shelby, the European sibling of the Dodge Lancer Shelby. A five-speed manual gearbox was standard, with a three-speed automatic transmission as an extra-cost option. The GTS Shelby came only with a manual transmission.

The Chrysler GTS had few buyers in Europe; the competition was too hard. Even the comparatively low prices could not help, and sales figures were very low. By the end of 1989, the GTS was replaced by the Saratoga.

Production Figures: