Delimited continuation

Delimited continuations were first introduced by Felleisen in 1988[1] with an operator called ${\displaystyle {\mathcal {F}}}$, first introduced in a tech report in 1987,[2] along with a prompt construct ${\displaystyle \#}$. The operator was designed to be a generalization of control operators that had been described in the literature such as call/cc from Scheme, ISWIM's J operator, John C. Reynolds' escape operator, and others. Subsequently, many competing delimited control operators were invented by the programming languages research community such as prompt and control,[4] shift and reset,[5][6]cupto,[7] fcontrol, and others.

Various operators for delimited continuations have been proposed in the research literature.[8]

One independent proposal[5] is based on continuation-passing style (CPS) -- i.e., not on continuation frames—and offers two control operators, shift and reset, that give rise to static rather than to dynamic delimited continuations.[9] The reset operator sets the limit for the continuation while the shift operator captures or reifies the current continuation up to the innermost enclosing reset. For example, consider the following snippet in Scheme:

(* 2 (reset (+ 1 (shift k (k 5)))))

The reset delimits the continuation that shift captures (named by k in this example). When this snippet is executed, the use of shift will bind k to the continuation (+ 1 []) where [] represents the part of the computation that is to be filled with a value. This continuation directly corresponds to the code that surrounds the shift up to the reset. Because the body of shift (i.e., (k 5)) immediately invokes the continuation, this code is equivalent to the following:

(* 2 (+ 1 5))

In general, these operators can encode more interesting behavior by, for example, returning the captured continuation k as a value or invoking k multiple times. The shift operator passes the captured continuation k to the code in its body, which can either invoke it, produce it as a result, or ignore it entirely. Whatever result that shift produces is provided to the innermost reset, discarding the continuation in between the reset and shift. However, if the continuation is invoked, then it effectively re-installs the continuation after returning to the reset. When the entire computation within reset is completed, the result is returned by the delimited continuation.[10] For example, in this Scheme code:

 (reset (* 2 (shift k CODE)))

whenever CODE invokes (k N), (* 2 N) is evaluated and returned.

This is equivalent to the following:

  (let ((k (lambda (x) (* 2 x)))) CODE)

Furthermore, once the entire computation within shift is completed, the continuation is discarded, and execution restarts outside reset. Therefore,

 (reset (* 2 (shift k (k (k 4)))))

invokes (k 4) first (which returns 8), and then (k 8) (which returns 16). At this point, the shift expression has terminated, and the rest of the reset expression is discarded. Therefore, the final result is 16.

Everything that happens outside the reset expression is hidden, i.e. not influenced by the control transfer. For example, this returns 17:

 (+ 1 (reset (* 2 (shift k (k (k 4))))))

Delimited continuations were first described independently by Felleisen et al.[2] and Johnson.[11] They have since been used in a large number of domains, particularly in defining new control operators; see Queinnec[12] for a survey.

Let's take a look at a more complicated example. Let null be the empty list:

 (reset
   (begin
     (shift k (cons 1 (k (void)))) ;; (1)
     null))

The context captured by shift is (begin [*] null), where [*] is the hole where k's parameter will be injected. The first call of k inside shift evaluates to this context with (void) = #<void> replacing the hole, so the value of (k (void)) is (begin #<void> null) = null. The body of shift, namely (cons 1 null) = (1), becomes the overall value of the reset expression as the final result.

Making this example more complicated, add a line:

 (reset
   (begin
     (shift k (cons 1 (k (void))))
     (shift k (cons 2 (k (void))))
     null))

If we comment out the first shift, we already know the result, it is (2); so we can as well rewrite the expression like this:

 (reset
   (begin
     (shift k (cons 1 (k (void))))
     (list 2)))

This is pretty familiar, and can be rewritten as (cons 1 (list 2)), that is, (list 1 2).

We can define yield using this trick:

(define (yield x) (shift k (cons x (k (void)))))

and use it in building lists:

 (reset (begin
          (yield 1)
          (yield 2)
          (yield 3)
          null))    ;; (list 1 2 3)

If we replace cons with stream-cons, we can build lazy streams:

  (define (stream-yield x) (shift k (stream-cons x (k (void)))))

  (define lazy-example
    (reset (begin
            (stream-yield 1)
            (stream-yield 2)
            (stream-yield 3)
            stream-null)))

We can generalize this and convert lists to stream, in one fell swoop:

 (define (list->stream xs)
   (reset (begin
            (for-each stream-yield xs)
            stream-null)))

In a more complicated example below the continuation can be safely wrapped into a body of a lambda, and be used as such:

 (define (for-each->stream-maker for-each) 
   (lambda (collection) 
     (reset (begin 
              (for-each (lambda (element) 
                          (shift k 
                            (stream-cons element (k 'ignored)))) 
                        collection) 
              stream-null))))

The part between reset and shift includes control functions like lambda and for-each; this is impossible to rephrase using lambdas.

Delimited continuations are also useful in linguistics: see Continuations in linguistics for details.

• Composable continuations tutorial at SchemeWiki
• Delimited continuations in operating systems, by Oleg Kiselyov and Chung-chieh Shan
• Native delimited continuations in (byte-code and native-code) OCaml
• Shift/reset для самых маленьких (in Russian)
• Some nice papers on delimited continuations and first-class macros