DMZ (computing)

In computer security, a DMZ or demilitarized zone (sometimes referred to as a perimeter network or screened subnet) is a physical or logical subnetwork that contains and exposes an organization's external-facing services to an untrusted, usually larger, network such as the Internet. The purpose of a DMZ is to add an additional layer of security to an organization's local area network (LAN): an external network node can access only what is exposed in the DMZ, while the rest of the organization's network is protected behind a firewall.[1] The DMZ functions as a small, isolated network positioned between the Internet and the private network.[2]

For the physical area where military operations are prohibited, see Demilitarized zone.

This is not to be confused with a DMZ host, a feature present in some home routers which frequently differs greatly from an ordinary DMZ.

The name is from the term demilitarized zone, an area between states in which military operations are not permitted.

Rationale

The DMZ is seen as not belonging to either network bordering it. This metaphor applies to the computing use as the DMZ acts as a gateway to the public Internet. It is neither as secure as the internal network, nor as insecure as the public internet.

In this case, the hosts most vulnerable to attack are those that provide services to users outside of the local area network, such as e-mail, Web and Domain Name System (DNS) servers. Because of the increased potential of these hosts suffering an attack, they are placed into this specific subnetwork in order to protect the rest of the network in case any of them become compromised.

Hosts in the DMZ are permitted to have only limited connectivity to specific hosts in the internal network, as the content of DMZ is not as secure as the internal network. Similarly, communication between hosts in the DMZ and to the external network is also restricted to make the DMZ more secure than the Internet and suitable for housing these special purpose services. This allows hosts in the DMZ to communicate with both the internal and external network, while an intervening firewall controls the traffic between the DMZ servers and the internal network clients, and another firewall would perform some level of control to protect the DMZ from the external network.

A DMZ configuration provides additional security from external attacks, but it typically has no bearing on internal attacks such as sniffing communication via a packet analyzer or spoofing such as e-mail spoofing.

It is also sometimes good practice to configure a separate classified militarized zone (CMZ),[3] a highly monitored militarized zone comprising mostly Web servers (and similar servers that interface to the external world i.e. the Internet) that are not in the DMZ but contain sensitive information about accessing servers within the LAN (like database servers). In such architecture, the DMZ usually has the application firewall and the FTP while the CMZ hosts the Web servers. (The database servers could be in the CMZ, in the LAN, or in a separate VLAN altogether.)

Any service that is being provided to users on the external network can be placed in the DMZ. The most common of these services are:

Web servers that communicate with an internal database require access to a database server, which may not be publicly accessible and may contain sensitive information. The web servers can communicate with database servers either directly or through an application firewall for security reasons.

E-mail messages and particularly the user database are confidential, so they are typically stored on servers that cannot be accessed from the Internet (at least not in an insecure manner), but can be accessed from email servers that are exposed to the Internet.

The mail server inside the DMZ passes incoming mail to the secured/internal mail servers. It also handles outgoing mail.

For security, compliance with legal standards such as HIPAA, and monitoring reasons, in a business environment, some enterprises install a proxy server within the DMZ. This has the following benefits:

  • Obliges internal users (usually employees) to use the proxy server for Internet access.
  • Reduced Internet access bandwidth requirements since some web content may be cached by the proxy server.
  • Simplifies recording and monitoring of user activities.
  • Centralized web content filtering.

A reverse proxy server, like a proxy server, is an intermediary, but is used the other way around. Instead of providing a service to internal users wanting to access an external network, it provides indirect access for an external network (usually the Internet) to internal resources. For example, a back office application access, such as an email system, could be provided to external users (to read emails while outside the company) but the remote user would not have direct access to their email server (only the reverse proxy server can physically access the internal email server). This is an extra layer of security particularly recommended when internal resources need to be accessed from the outside, but it's worth noting this design still allows remote (and potentially malicious) users to talk to the internal resources with the help of the proxy. Since the proxy functions as a relay between the non-trusted network and the internal resource: it may also forward malicious traffic (e.g. application level exploits) towards the internal network; therefore the proxy's attack detection and filtering capabilities are crucial in preventing external attackers from exploiting vulnerabilities present in the internal resources that are exposed via the proxy. Usually such a reverse proxy mechanism is provided by using an application layer firewall that focuses on the specific shape and contents of the traffic rather than just controlling access to specific TCP and UDP ports (as a packet filter firewall would do), but a reverse proxy is usually not a good substitute for a well thought out DMZ design as it has to rely on continuous signature updates for updated attack vectors.

Architecture

There are many different ways to design a network with a DMZ. Two of the most basic methods are with a single firewall, also known as the three legged model, and with dual firewalls, also known as back to back. These architectures can be expanded to create very complex architectures depending on the network requirements.

Single firewall
Diagram of a typical three-legged network model employing a DMZ using a single firewall.

A single firewall with at least 3 network interfaces can be used to create a network architecture containing a DMZ. The external network is formed from the ISP to the firewall on the first network interface, the internal network is formed from the second network interface, and the DMZ is formed from the third network interface. The firewall becomes a single point of failure for the network and must be able to handle all of the traffic going to the DMZ as well as the internal network. The zones are usually marked with colors -for example, purple for LAN, green for DMZ, red for Internet (with often another color used for wireless zones).

Dual firewall
Diagram of a typical network employing DMZ using dual firewalls.

The most secure approach, according to Colton Fralick,[4] is to use two firewalls to create a DMZ. The first firewall (also called the "front-end" or "perimeter"[5] firewall) must be configured to allow traffic destined to the DMZ only. The second firewall (also called "back-end" or "internal" firewall) only allows traffic to the DMZ from the internal network.

This setup is considered[4] more secure since two devices would need to be compromised. There is even more protection if the two firewalls are provided by two different vendors, because it makes it less likely that both devices suffer from the same security vulnerabilities. For example, a security hole found to exist in one vendor's system is less likely to occur in the other one. One of the drawbacks of this architecture is that it's more costly, both to purchase, and to manage.[6] The practice of using different firewalls from different vendors is sometimes described as a component of a "defense in depth"[7] security strategy.

DMZ host

Some home routers refer to a DMZ host, which—in many cases—is actually a misnomer. A home router DMZ host is a single address (e.g., IP address) on the internal network that has all traffic sent to it which is not otherwise forwarded to other LAN hosts. By definition, this is not a true DMZ (demilitarized zone), since the router alone does not separate the host from the internal network. That is, the DMZ host is able to connect to other hosts on the internal network, whereas hosts within a real DMZ are prevented from connecting with the internal network by a firewall that separates them unless the firewall permits the connection.

A firewall may allow this if a host on the internal network first requests a connection to the host within the DMZ. The DMZ host provides none of the security advantages that a subnet provides and is often used as an easy method of forwarding all ports to another firewall / NAT device. This tactic (establishing a DMZ host) is also used with systems which do not interact properly with normal firewalling rules or NAT. This can be because no forwarding rule can be formulated ahead of time (varying TCP or UDP port numbers for example, as opposed to a fixed number or fixed range). This is also used for network protocols for which the router has no programming to handle (6in4 or GRE tunnels are prototypical examples).

See also

References
  1. "Control System Security DMZ". Official website of The Cybersecurity and Infrastructure Security Agency (CISA) for the Dept. of Homeland Security, USA. Retrieved 2020-06-09.
  2. "What is a DMZ and How does it Work?". Techtarget SearchSecurity. Retrieved 2020-06-09.
  3. Bradley Mitchell (27 August 2018). "Demilitarized Zone in Computer Networking". Retrieved 10 December 2018.
  4. Jacobs, Stuart (2015). Engineering Information Security: The Application of Systems Engineering Concepts to Achieve Information Assurance. John Wiley & Sons. p. 296. ISBN 9781119101604.
  5. "Perimeter Firewall Design". Microsoft Security TechCenter. Microsoft Corporation. Retrieved 14 October 2013.
  6. Zeltzer, Lenny (April, 2002). "Firewall Deployment for Multitier Applications"
  7. Young, Scott (2001). "Designing a DMZ". SANS Institute. p. 2. Retrieved 11 December 2015.

Further reading
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.