Dimethoxymethane

Dimethoxymethane, also called methylal, is a colorless flammable liquid with a low boiling point, low viscosity and excellent dissolving power. It has a chloroform-like odor and a pungent taste. It is the dimethyl acetal of formaldehyde. Dimethoxymethane is soluble in three parts water and miscible with most common organic solvents.

Dimethoxymethane
Structural formula of dimethoxymethane
Ball and stick model of dimethoxymethane
Names
Preferred IUPAC name
Dimethoxymethane
Other names
Formal

Formaldehyde dimethyl ether
Methylal
Dimethylformal (DMFL)
Formaldehyde dimethylacetal
Methoxymethyl methyl ether

Methylene dimethyl ether
Identifiers
3D model (JSmol)
1697025
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.003.378
EC Number
  • 203-714-2
100776
MeSH Dimethoxymethane
RTECS number
  • PA8750000
UNII
UN number 1234
  • InChI=1S/C3H8O2/c1-4-3-5-2/h3H2,1-2H3 checkY
    Key: NKDDWNXOKDWJAK-UHFFFAOYSA-N checkY
  • InChI=1/C3H8O2/c1-4-3-5-2/h3H2,1-2H3
    Key: NKDDWNXOKDWJAK-UHFFFAOYAE
  • COCOC
Properties
C3H8O2
Molar mass 76.095 g·mol−1
Appearance Colorless liquid[1]
Odor Chloroform-like[1]
Density 0.8593 g cm−3 (at 20 °C)[1]
Melting point −105 °C (−157 °F; 168 K)[1][2]
Boiling point 42 °C (108 °F; 315 K)[1][2]
33% (20 °C)[3]
Vapor pressure 330 mmHg (20 °C)[3]
−47.3·10−6 cm3/mol
Hazards
GHS labelling:
GHS02: FlammableGHS07: Exclamation mark
Danger
H225, H315, H319, H335
P210, P233, P240, P241, P242, P243, P261, P264, P271, P280, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P312, P321, P332+P313, P337+P313, P362, P370+P378, P403+P233, P403+P235, P405, P501
Flash point −18 °C (0 °F; 255 K)
Explosive limits 2.2–13.8%[3]
Lethal dose or concentration (LD, LC):
5708 mg/kg (rabbit, oral)[4]
18000 ppm (mouse, 7 hr)
15000 ppm (rat)
18354 ppm (mouse, 7 hr)[4]
NIOSH (US health exposure limits):
PEL (Permissible)
TWA 1000 ppm (3100 mg/m3)[3]
REL (Recommended)
TWA 1000 ppm (3100 mg/m3)[3]
IDLH (Immediate danger)
2200 ppm[3]
Related compounds
Related Ethers
Dimethoxyethane
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)
Infobox references

Synthesis and structure

It can be manufactured by oxidation of methanol or by the reaction of formaldehyde with methanol. In aqueous acid, it is hydrolyzed back to formaldehyde and methanol.

Due to the anomeric effect, dimethoxymethane has a preference toward the gauche conformation with respect to each of the C–O bonds, instead of the anti conformation. Since there are two C–O bonds, the most stable conformation is gauche-gauche, which is around 7 kcal/mol more stable than the anti-anti conformation, while the gauche-anti and anti-gauche are intermediate in energy.[5] Since it is one of the smallest molecules exhibiting this effect, which has great interest in carbohydrate chemistry, dimethoxymethane is often used for theoretical studies of the anomeric effect.

Applications

Industrially, it is primarily used as a solvent and in the manufacture of perfumes, resins, adhesives, paint strippers and protective coatings. Another application is as a gasoline-additive for increasing octane number. Dimethoxymethane can also be used for blending with diesel. [6]

Reagent in organic synthesis

Another useful application of dimethoxymethane is to protect alcohols with a methoxymethyl (MOM) ether in organic synthesis.[7] This can be done using phosphorus pentoxide in dry dichloromethane or chloroform. This is a preferred method to using chloromethyl methyl ether (MOMCl). Alternatively, MOMCl can be prepared as a solution in a methyl ester solvent by reacting dimethoxymethane and an acyl chloride in the presence of a Lewis acid catalyst like zinc bromide:

MeOCH2OMe + RC(=O)Cl → MeOCH2Cl + RC(=O)(OMe)).

The solution of the reagent can be used directly without purification, minimizing contact with the carcinogenic chloromethyl methyl ether. Unlike the classical procedure, which uses formaldehyde and hydrogen chloride as starting materials, the highly carcinogenic side product bis(chloromethyl) ether is not generated.[8]

References

  1. Merck Index, 11th Edition, 5936
  2. International Chemical Safety Card 1152
  3. NIOSH Pocket Guide to Chemical Hazards. "#0396". National Institute for Occupational Safety and Health (NIOSH).
  4. "Methylal". Immediately Dangerous to Life or Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
  5. Carey, Francis A.; Sundberg, Richard J. (2007). Advanced organic chemistry (5th ed.). New York: Springer. ISBN 9780387448978. OCLC 154040953.
  6. Shrestha, Krishna P.; Eckart, Sven; Elbaz, Ayman M.; Giri, Binod R.; Fritsche, Chris; Seidel, Lars; Roberts, William L.; Krause, Hartmut; Mauss, Fabian (2020). "A comprehensive kinetic model for dimethyl ether and dimethoxymethane oxidation and NO interaction utilizing experimental laminar flame speed measurements at elevated pressure and temperature". Combustion and Flame. 218: 57–74. doi:10.1016/j.combustflame.2020.04.016. hdl:10754/662921.
  7. Martin Berliner and Katherine Belecki. "Synthesis of Alpha-Halo Ethers from Symmetric Acetals and in situ Methoxymethylation of an Alcohol". Organic Syntheses. 84: 102.; Collective Volume, vol. 11, p. 934
  8. "SYNTHESIS OF ALPHA-HALO ETHERS FROM SYMMETRIC ACETALS AND in situ METHOXYMETHYLATION OF AN ALCOHOL". orgsyn.org. Retrieved 2018-09-13.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.