Active suspension

Hydraulically actuated suspensions are controlled with the use of hydraulics. The first example appeared in 1954, with the hydropneumatic suspension developed by Paul Magès at Citroën. The hydraulic pressure is supplied by a high pressure radial piston hydraulic pump. Sensors continually monitor body movement and vehicle ride level, constantly supplying the hydraulic height correctors with new data. In a matter of a few milliseconds, the suspension generates counter forces to raise or lower the body. During driving maneuvers, the encased nitrogen compresses instantly, offering six times the compressibility of the steel springs used by vehicles up to this time.[4]

In practice, the system has always incorporated the desirable self-levelling suspension and height adjustable suspension features, with the latter now tied to vehicle speed for improved aerodynamic performance, as the vehicle lowers itself at high speed.

This system performed remarkably well in straight ahead driving, including over uneven surfaces, but had little control over roll stiffness.[5]

Millions of production vehicles have been built with variations on this system.

Colin Chapman developed the original concept of computer management of hydraulic suspension in the 1980s to improve cornering in racing cars. Lotus fitted and developed a prototype system to a 1985 Excel with electro-hydraulic active suspension, but never offered it for sale to the public, although many demonstration cars were built for other manufacturers.

Sensors continually monitor body movement and vehicle ride level, constantly supplying the computer with new data. As the computer receives and processes data, it operates the hydraulic servos, mounted beside each wheel. Almost instantly, the servo-regulated suspension generates counter forces to body lean, dive, and squat during driving maneuvers.

Williams Grand Prix Engineering prepared an active suspension, devised by designer-aerodynamicist Frank Dernie, for the team's Formula 1 cars in 1992, creating such successful cars that the Fédération Internationale de l'Automobile decided to ban the technology to decrease the gap between Williams F1 team and its competitors.[6]

Computer Active Technology Suspension (CATS) co-ordinates the best possible balance between ride quality and handling by analysing road conditions and making up to 3,000 adjustments every second to the suspension settings via electronically controlled dampers.

The 1999 Mercedes-Benz CL-Class (C215) introduced Active Body Control, where high pressure hydraulic servos are controlled by electronic computing, and this feature is still available. Vehicles can be designed to actively lean into curves to improve occupant comfort.[7][8]

Active anti-roll bar stiffens under command of the driver or suspension electronic control unit (ECU) during hard cornering. First production car was Mitsubishi Mirage Cyborg in 1988.

In fully active electronically controlled production cars, the application of electric servos and motors married to electronic computing allows for flat cornering and instant reactions to road conditions.

The Bose Corporation has a proof of concept model. The founder of Bose, Amar Bose, had been working on exotic suspensions for many years while he was an MIT professor.[9]

Electromagnetic active suspension uses linear electromagnetic motors attached to each wheel. It provides extremely fast response, and allows regeneration of power consumed, by using the motors as generators. This nearly surmounts the issues of slow response times and high power consumption of hydraulic systems. Electronically controlled active suspension system (ECASS) technology was patented by the University of Texas Center for Electromechanics in the 1990s[10] and has been developed by L-3 Electronic Systems for use on military vehicles.[11] The ECASS-equipped Humvee exceeded the performance specifications for all performance evaluations in terms of absorbed power to the vehicle operator, stability and handling.

• Michelin's Active Wheel from 2004 incorporates an in-wheel electrical suspension motor that controls torque distribution, traction, turning maneuvers, pitch, roll and suspension damping for that wheel, in addition to an in-wheel electric traction motor.[12][13]

• Audi active electromechanical suspension system introduced in 2017. It drives each wheel individually and adapts to the prevailing road conditions. Each wheel has an electric motor which is powered by the 48-volt main electrical system. Additional components include gears, a rotary tube together with internal titanium torsion bar and a lever which exerts up to 1,100 Nm (811.3 lb-ft) on the suspension via a coupling rod. Thanks to the front camera, the sedan detects bumps in the road early on and predictively adjusts the active suspension. Even before the car reaches a bump in the road, the preview function developed by Audi transmits the right amount of travel to the actuators and actively controls the suspension. The computer-controlled motors can sense imperfection on the road, and can raise the suspension up from the wheel which would go over the undulation, thus aiding the ride quality. The system will direct the motors on the outside to push up or pull down the suspension while cornering. This will result in a flatter drive and reduced body-roll around corners which in turn means more confident handling dynamics.[14][15][16][17][18][19][20]

This type is the most economic and basic type of semi-active suspensions. They consist of a solenoid valve which alters the flow of the hydraulic medium inside the shock absorber, therefore changing the damping characteristics of the suspension setup. The solenoids are wired to the controlling computer, which sends them commands depending on the control algorithm (usually the so-called "Sky-Hook" technique). This type of system is used in Cadillac's Computer Command Ride (CCR) suspension system. The first production car was the Toyota Soarer with semi-active Toyota Electronic Modulated Suspension, from 1983.

Another fairly recent method incorporates magnetorheological dampers with a brand name MagneRide. It was initially developed by Delphi Corporation for GM and was standard, as many other new technologies, for Cadillac STS (from model 2002), and on some other GM models from 2003. This was an upgrade for semi-active systems ("automatic road-sensing suspensions") used in upscale GM vehicles for decades. It allows, together with faster modern computers, changing the stiffness of all wheel suspensions independently. These dampers are finding increased usage in the US and already leases to some foreign brands, mostly in more expensive vehicles.

This system was in development for 25 years. The damper fluid contains metallic particles. Through the onboard computer, the dampers' compliance characteristics are controlled by an electromagnet. Essentially, increasing the current flow into the damper magnetic circuit increases the circuit magnetic flux. This in turn causes the metal particles to change their alignment, which increases fluid viscosity thereby raising the compression/rebound rates, while a decrease softens the effect of the dampers by aligning the particles in the opposite direction. If we imagine the metal particles as dinner plates then whilst aligned so they are on edge - viscosity is minimised. At the other end of the spectrum they will be aligned at 90 degrees so flat. Thus making the fluid much more viscous. It is the electric field produced by the electromagnet that changes the alignment of the metal particles. Information from wheel sensors (about suspension extension), steering, acceleration sensors - and other data, is used to calculate the optimal stiffness at that point in time. The fast reaction of the system (milliseconds) allows, for instance, making a softer passing by a single wheel over a bump in the road at a particular instant in time.