European Union energy label

The energy labels are separated into at least four categories:

• The appliance's details: according to each appliance, specific details, of the model and its materials.
• Energy class: a colour code associated with a letter (from A to G) that gives an idea of the appliance's electrical consumption relative to what is available on the market
• Consumption, efficiency, capacity, etc.: this section gives information according to appliance type.
• Noise: the noise emitted by the appliance is described in decibels.

For refrigerating appliances, such as refrigerators, freezers, wine-storage appliances, and combined appliances, the labelling is specified in terms of an energy efficiency index EEI, which is an indication of the annual power consumption relative to a reference consumption that is based on the storage volume and the type of appliance (refrigerator or freezer).[9]

The label also contains:

• the annual energy consumption in kW·h
• the capacity of fresh foods in litres for refrigerators and combined appliances
• the capacity of frozen foods in litres for freezers and combined appliances
• the noise in dB(A)

For cold appliances (and this product alone), for models that are more economical than those of category A, categories A+, A++, and A+++ were previously assigned. According to the 2010 regulations, the boundary between the A⁺ and A classes was 44 up to 1 July 2014, and 42 after that date.

Up to 2010, the energy efficiency scale for washing machines is calculated based on a cotton cycle at 60 °C (140 °F) with a maximum declared load. This load is typically 6 kg. The energy efficiency index is in kW·h per kilogram of washing, assuming a cold-water supply at 15 °C.

The energy label also contains information on:

• total consumption per cycle
• washing performance – with a class from A to G
• spin drying performance – with a class from A to G
• maximum spin speed
• the total cotton capacity in kg
• water consumption per cycle in litres
• noise in the washing and spinning cycles dB(A)

The washing performance is measured according to European harmonised standard EN 60456 and is based on a 60 °C cycle on fabric samples with stains of oil, blood, chocolate, sebum, and red wine, using a standardised detergent and compared against a reference washing machine.[10] The amount of stain removal is then translated into a washing performance index.

The spin-drying efficiency class is based on the remaining moisture content (RMC), which is the mass of water divided by the dry mass of cotton fabrics. It is based on a weighted average of full-load and partial-load cycles.

A new energy label, introduced in 2010, is based on the energy efficiency index (EEI), and has energy classes in the range A+++ to D.[11] The EEI is a measure of the annual electricity consumption, and includes energy consumed during power-off and standby modes, and the energy consumed in 220 washing cycles. For the washing cycles, a weighted mix consisting of 42% full-load cycles at 60 °C, 29% partial-load cycles at 60 °C, and 29% partial-load cycles at 40 °C. The washing performance is not mentioned anymore, since all washing machines must reach class A anyway. For a 6-kg machine, an EEI of 100 is equivalent to 334 kWh per year, or 1.52 kWh per cycle.

For tumble dryers the energy efficiency scale is calculated using the cotton drying cycle with a maximum declared load. The energy efficiency index is in kW·h per kilogram of load. Different scales apply for condenser and vented dryers.

For condenser dryers, a weighted condensation efficiency class is calculated using the average condensation efficiency for the standard cotton cycle at both full and partial load.

The label also contains:

• the energy consumption per cycle
• the total cotton capacity
• whether the unit is vented or condensing
• cycle time corresponding to the standard cotton programme at full load in minutes
• noise in dB(A)

For combined washer dryers the energy efficiency scale is calculated using the cotton drying cycle with a maximum declared load. The energy efficiency index is in kW·h per kilogram of load. Different scales apply for condenser and vented dryers.

The label also contains:

• the energy consumption per cycle (washing and drying)
• the energy consumption per cycle – washing only
• washing performance – with a class from A to G
• the maximum spin speed
• the total cotton capacity (washing and drying separately)
• water consumption for a full load washed and dried – note that condenser dryers may use significant amounts of water on the drying cycle
• noise in dB (A) (separately for washing, spinning, and drying)

The energy efficiency of a dishwasher is calculated according to the number of place settings. For the most common size of appliance, the 12 place setting machine the following classes apply up to 2010.

After 2010, a new system is used, based on an energy efficiency index (EEI), which is based on the annual power usage, based on stand-by power consumption and 280 cleaning cycles, relative to the standard power usage for that type of dishwasher. For a 12-place-setting dishwasher, an EEI of 100 corresponds to 462 kWh per year.

The label also contains:

• the energy consumption in kW·h /cycle
• the efficiency of the washing cycle with a class from A to G
• the efficiency of the drying cycle with a class from A to G
• the capacity as a number of place settings
• the water consumption in litres per cycle
• noise in dB(A)

For ovens, the label also contains:

• the efficiency with a class from A to G
• the energy consumption in kW·h
• the volume in litres
• the type (small/medium/large)

Every label of light sources, including light bulbs (halogen, compact fluorescent, etc.) or LED modules/lamps, contains the following information:

• the energy efficiency category from A to G
• the electricity consumption of the lamp in kWh per 1000 hours

Where the energy efficiency category is given by this table:[13]

Light sources, in ${\displaystyle \eta _{TM}}$
A	B	C	D	E	F	G
≥210	>185	>160	>135	>110	>85	<85

Where, ${\displaystyle \eta _{TM}}$, is defined as the total mains efficacy, calculated as: ${\displaystyle \eta _{TM}={\Big (}{\frac {\phi _{use}}{P_{on}}}{\Big )}\times F_{TM}{\text{ (lm/W)}}}$

Where ${\displaystyle \phi _{use}}$ is the declared useful luminous flux (in lm), ${\displaystyle P_{on}}$ is the declared on-mode power consumption (in watts), and ${\displaystyle F_{TM}}$ is a factor between 0.926 and 1.176 depending on the light source being or not directional and being or not powered from mains.[13]

Energy classes of light bulbs in terms of luminous flux and power consumption (until 31 August 2021)

Every label of light bulbs and tubes (including incandescent light bulbs, fluorescent lamps, LED lamps) contains the following information:

• the energy efficiency category from A to G
• the luminous flux of the bulb in lumens
• the electricity consumption of the lamp in watts
• the average life length in hours

According to the light bulb's electrical consumption relative to a standard (GLS or incandescent), the lightbulb is in one of the following classes:[14]

Class A is defined in a different way; hence, the variable percentage.

Since 2012[15] A+ and A++ classes are added and are introduced different classes for directional lamps and non-directional lamps.

Directional lamps are defined as "having at least 80% light output within a solid angle of π sr (corresponding to a cone with angle of 120°)".[15]

These lamp classes correspond roughly to the following lamp types:[16]

Since September 2009, household light bulbs must be class A, with the exception of clear (transparent) lamps. For the latter category, lamps must be class C or better, with a transition period up to September 2012, and class B after September 2016.[16]

Incandescent and fluorescent lamps with and without an integrated ballast can be divided into energy efficiency classes. The division of lamps into such classes was made in EU Directive 98/11/EC[14] on 27 January 1998, and includes lamps that are not marketed for use in the home. Light sources with an output of more than 6,500 lm and those that are not operated on line voltage are excluded. The energy efficiency class is determined as follows (Φ is the luminous flux in lm and P is the power consumption of the lamp in W):

Lamps are classified into class A if:

${\displaystyle P\leq 0.240\cdot {\sqrt {\Phi }}+0.0103\cdot \Phi .}$

Fluorescent lamps without integrated ballast, are classified into class A if:

${\displaystyle P\leq 0.150\cdot {\sqrt {\Phi }}+0.0097\cdot \Phi .}$

The classification in the energy efficiency class B-G is based on the percentage (Energy Efficiency Index) at the reference power

${\displaystyle P_{\mathrm {R} }={\begin{cases}0.88\cdot {\sqrt {\Phi }}+0.049\cdot \Phi &(\Phi >34{\mbox{ lm}})\\0.2\cdot \Phi &(\Phi \leq 34{\mbox{ lm}})\end{cases}}}$

about the power consumption of a standard light bulb with the same luminous flux.

A trial of estimated financial energy cost of refrigerators alongside EU energy-efficiency class (EEEC) labels online found that the approach of labels involves a trade-off between financial considerations and higher cost requirements in effort or time for the product-selection from the many available options – which are often unlabelled and don't have any EEEC-requirement for being bought, used or sold within the EU. Moreover, in this one trial the labeling was ineffective in shifting purchases towards more sustainable options.[19][20]

• EnergyGuide
• EnerGuide
• Energy rating label
• China Energy Label