Extrapolation

A sound choice of which extrapolation method to apply relies on a priori knowledge of the process that created the existing data points. Some experts have proposed the use of causal forces in the evaluation of extrapolation methods.[2] Crucial questions are, for example, if the data can be assumed to be continuous, smooth, possibly periodic, etc.

Polynomial

Lagrange extrapolations of the sequence 1,2,3. Extrapolating by 4 leads to a polynomial of minimal degree (cyan line).

A polynomial curve can be created through the entire known data or just near the end (two points for linear extrapolation, three points for quadratic extrapolation, etc.). The resulting curve can then be extended beyond the end of the known data. Polynomial extrapolation is typically done by means of Lagrange interpolation or using Newton's method of finite differences to create a Newton series that fits the data. The resulting polynomial may be used to extrapolate the data.

High-order polynomial extrapolation must be used with due care. For the example data set and problem in the figure above, anything above order 1 (linear extrapolation) will possibly yield unusable values; an error estimate of the extrapolated value will grow with the degree of the polynomial extrapolation. This is related to Runge's phenomenon.

Typically, the quality of a particular method of extrapolation is limited by the assumptions about the function made by the method. If the method assumes the data are smooth, then a non-smooth function will be poorly extrapolated.

In terms of complex time series, some experts have discovered that extrapolation is more accurate when performed through the decomposition of causal forces.[6]

Even for proper assumptions about the function, the extrapolation can diverge severely from the function. The classic example is truncated power series representations of sin(x) and related trigonometric functions. For instance, taking only data from near the x = 0, we may estimate that the function behaves as sin(x) ~ x. In the neighborhood of x = 0, this is an excellent estimate. Away from x = 0 however, the extrapolation moves arbitrarily away from the x-axis while sin(x) remains in the interval [−1, 1]. I.e., the error increases without bound.

Taking more terms in the power series of sin(x) around x = 0 will produce better agreement over a larger interval near x = 0, but will produce extrapolations that eventually diverge away from the x-axis even faster than the linear approximation.

This divergence is a specific property of extrapolation methods and is only circumvented when the functional forms assumed by the extrapolation method (inadvertently or intentionally due to additional information) accurately represent the nature of the function being extrapolated. For particular problems, this additional information may be available, but in the general case, it is impossible to satisfy all possible function behaviors with a workably small set of potential behavior.

In complex analysis, a problem of extrapolation may be converted into an interpolation problem by the change of variable ${\displaystyle {\hat {z}}=1/z}$. This transform exchanges the part of the complex plane inside the unit circle with the part of the complex plane outside of the unit circle. In particular, the compactification point at infinity is mapped to the origin and vice versa. Care must be taken with this transform however, since the original function may have had "features", for example poles and other singularities, at infinity that were not evident from the sampled data.

Another problem of extrapolation is loosely related to the problem of analytic continuation, where (typically) a power series representation of a function is expanded at one of its points of convergence to produce a power series with a larger radius of convergence. In effect, a set of data from a small region is used to extrapolate a function onto a larger region.

Again, analytic continuation can be thwarted by function features that were not evident from the initial data.

Also, one may use sequence transformations like Padé approximants and Levin-type sequence transformations as extrapolation methods that lead to a summation of power series that are divergent outside the original radius of convergence. In this case, one often obtains rational approximants.

The extrapolated data often convolute to a kernel function. After data is extrapolated, the size of data is increased N times, here N is approximately 2–3. If this data needs to be convoluted to a known kernel function, the numerical calculations will increase N log(N) times even with fast Fourier transform (FFT). There exists an algorithm, it analytically calculates the contribution from the part of the extrapolated data. The calculation time can be omitted compared with the original convolution calculation. Hence with this algorithm the calculations of a convolution using the extrapolated data is nearly not increased. This is referred as the fast extrapolation. The fast extrapolation has been applied to CT image reconstruction.[7]

Extrapolation arguments are informal and unquantified arguments which assert that something is probably true beyond the range of values for which it is known to be true. For example, we believe in the reality of what we see through magnifying glasses because it agrees with what we see with the naked eye but extends beyond it; we believe in what we see through light microscopes because it agrees with what we see through magnifying glasses but extends beyond it; and similarly for electron microscopes. Such arguments are widely used in biology in extrapolating from animal studies to humans and from pilot studies to a broader population.[8]

Like slippery slope arguments, extrapolation arguments may be strong or weak depending on such factors as how far the extrapolation goes beyond the known range.[9]

Look up extrapolation in Wiktionary, the free dictionary.

Wikimedia Commons has media related to Extrapolation.

• Forecasting
• Minimum polynomial extrapolation
• Multigrid method
• Prediction interval
• Regression analysis
• Richardson extrapolation
• Static analysis
• Trend estimation
• Extrapolation domain analysis
• Dead reckoning
• Interior reconstruction
• Extreme value theory
• Interpolation

• Extrapolation Methods. Theory and Practice by C. Brezinski and M. Redivo Zaglia, North-Holland, 1991.
• Avram Sidi: "Practical Extrapolation Methods: Theory and Applications", Cambridge University Press, ISBN 0-521-66159-5 (2003).
• Claude Brezinski and Michela Redivo-Zaglia : "Extrapolation and Rational Approximation", Springer Nature, Switzerland, ISBN 9783030584177, (2020).