Fixed-gear bicycle

A fixed-gear bicycle (or fixed-wheel bicycle, commonly known in some places as a fixie[1]) is a bicycle that has a drivetrain with no freewheel mechanism such that the pedals always will spin together with the rear wheel. The freewheel was developed early in the history of bicycle design but the fixed-gear bicycle remained the standard track racing design. More recently the "fixie" has become a popular alternative among mainly urban cyclists, offering the advantage of simplicity compared with the standard multi-geared bicycle.

This article is about a bicycle with no freewheel mechanism. For a bicycle with only one gear, see single-speed bicycle.
A fixed-gear bicycle
An 18-tooth sprocket that attaches to the rear hub of fixed-gear bike
Track sprockets are typically attached and removed from the hub by screwing them with a chain whip. This tool incorporates a lockring spanner for securing a reverse threaded lockring against the sprocket.

Most bicycle hubs incorporate a freewheel to allow the pedals to remain stationary while the bicycle is in motion, so that the rider can coast, i.e., ride without pedalling using forward momentum. A fixed-gear drivetrain has the drive sprocket (or cog) threaded or bolted directly to the hub of the back wheel, so that the pedals are directly coupled to the wheel. During acceleration, the pedal crank drives the wheel, but in other situations, the rear wheel can drive the pedal cranks.[2] This direct coupling allows a cyclist to apply a braking force with the legs and bodyweight, by resisting the rotation of the cranks. It also makes it possible to cycle backwards.

As a general rule, fixed-gear bicycles are single-speed. A derailleur for gear selection would introduce chain slack, which would interfere with braking. Gear selection can, however, be accomplished with the use of an internally geared hub. For example, a Sturmey-Archer fixed-gear three-speed hub is a fixed-gear multi-speed arrangement. Most fixed-gear bicycles only have a front brake, and some have no brakes at all.[3][4]

Uses

A track bicycle or track bike is a form of fixed-gear bicycle optimized for racing at a velodrome or at an outdoor track. Some road racing and club cyclists use a fixed-gear bicycle for training during the winter months, generally using a relatively low gear ratio, believed to help develop a good pedalling style.[5] In the UK until the 1950s it was common for riders to use fixed-gear bicycles for time trials. The 1959 British 25 mile time trial championship was won by Alf Engers with a competition record of 55 minutes 11 seconds, riding an 84-inch fixed-gear bicycle.[6][7][8][9] The fixed-gear was also commonly used, and continues to be used in the end of season hill climb races in the autumn.[10][11] A typical club men's fixed-gear machine would have been a "road/path" or "road/track" cycle. In the era when most riders only had one cycle, the same bike when stripped down and fitted with racing wheels was used for road time trials and track racing, and when fitted with mudguards (fenders) and a bag, it was used for club runs, touring and winter training.[12][13][14][15] By the 1960s, multi-gear derailleurs had become the norm and riding fixed-gear bicycles on the road declined over the next few decades.[16] Recent years have seen renewed interest and increased popularity of fixed-gear cycling.

In urban North America and similar areas in other Western cities, fixed-gear bicycles have achieved significant popularity, with the rise of discernible regional aesthetic preferences for finish and design details.[17]

Dedicated fixed-gear road bicycles are being produced in greater numbers by established bicycle manufacturers. They are generally low in price[18] and characterized by relaxed road geometry, as opposed to the steep geometry of track bicycles.[19]

Fixed-gear bicycles are also used in cycle ball, bike polo and artistic cycling.

A fixed-gear bicycle is particularly well suited for track stands, a maneuver in which the bicycle can be held stationary, balanced upright with the rider's feet on the pedals.[20]

Advantages and disadvantages

One of the perceived main attractions of a fixed gear bicycle is low weight. Without the added parts required for a fully geared drive train—derailleurs, shifters, cables, cable carriers, multiple chain rings, freewheel hub, brazed-on mounting lugs—a fixed gear bicycle weighs less than its geared equivalent. The chain itself is subject to less sideways force and will not wear out as fast as on a derailleur system.[21] Also, a fixed gear drivetrain is more mechanically efficient than any other bicycle drivetrain, with the most direct power transfer from rider to the wheels. Thus, a fixed gear requires less energy in any given gear to move than a geared bike in the same gear.[3]

In slippery conditions some riders prefer to ride fixed because they believe the transmission provides increased feedback on back tire grip. However, there is also an increased risk of loss of control in such conditions. This is especially so when taking into account the large number of riders who ride brakeless. These riders must brake entirely through the drivetrain. Ideally this is done by resisting the forward motion of the pedals, shedding speed while the bike is still moving. Alternatively, though far less efficiently, one can brake by stopping the motion of the pedals in mid-rotation, causing the rear wheel to lock in place, allowing the bicycle to skid and slow down from kinetic friction (see below).[22]

Descending any significant gradient is more difficult as the rider must spin the cranks at high speed (sometimes at 170 rpm or more), or use the brakes to slow down. Some consider that the enforced fast spin when descending increases suppleness or flexibility, which is said to improve pedalling performance on any type of bicycle; however the performance boost is negligible compared to the benefits of riding a free wheel.[23]

Riding fixed is considered by some to encourage a more effective pedaling style, which it is claimed translates into greater efficiency and power when used on a bicycle fitted with a freewheel. It allows for the rider to engage in and practice proper cadence, which is the balanced and rhythmic flow of pedaling, enhancing performance for both cyclist and bicycle.[24]

When first riding a fixed gear, a cyclist used to a freewheel may try to freewheel, or coast, particularly when approaching corners or obstacles. Since coasting is not possible this can lead to a "kick" to the trailing leg, and even to loss of control of the bicycle. Riding at high speed around corners can be difficult on a road bike converted into a fixed-gear bicycle, as the pedals can strike the road, resulting in loss of control. Proper track bikes have a higher bottom bracket to compensate for the constantly spinning cranks and largely mitigate this problem.

Perhaps the most obvious disadvantage is the lack of multiple gears, and the flexibility in pedaling cadence and resistance made available through gear shifting. Hilly or uneven mountainous terrain with steep grades can be particularly challenging, as the rider cannot adjust the gearing to match the terrain.

Brakeless
Cyclist riding a fixed gear bike without brakes

Many urban fixed-gear riders think brakes are not strictly necessary, and brakeless fixed riding has a cult status in some areas.[25] Brakes and their cables are said to add extra bulk to the simple appearance of a fixed gear bicycle, and they prevent trick manoeuvres that involve spinning the front wheel in a full circle, unless equipped with special 360° freedom "detangler" system already used on BMX bicycles.

Other riders dismiss riding on roads without brakes as an affectation, based on image rather than practicality.[26] Riding without brakes can be dangerous, is prohibited by law in many jurisdictions, and may jeopardize the chances of a claim in the event of an accident.[27]

Technique

It is possible to slow down or stop a fixed-gear bike in two ways. The first, most efficient, and least stressful on the rider's body is by resisting the turning cranks as they come up and around, shedding speed with each pedal rotation. The second way, less efficient but more showy, is to bump or skid the rear wheel along the riding surface. Such a move is initiated by shifting the rider's weight slightly forward and pulling up on the pedals using clipless pedals or toe clips and straps. The rider then stops turning the cranks, thus stopping the drivetrain and rear wheel, while applying body weight in opposition to the rotation of the cranks. This causes the rear wheel to skid, and slow the bike. The skid can be held until the bicycle stops or until the rider desires to continue pedaling again at a slower speed. The technique requires practice and is generally considered dangerous when used during cornering.[28][29]

On any bike with only rear wheel braking, the maximum deceleration is significantly lower than on a bike equipped with a front brake.[30] As a vehicle brakes, weight is transferred towards the front wheel and away from the rear, decreasing the amount of grip the rear wheel has. Transferring the rider's weight back increases rear wheel braking efficiency, but a front wheel fitted with an ordinary brake might provide 70% or more of the braking power when braking hard.

Legality

Austria – Brakeless bicycles are not legal to be driven on public roads. Every bike has to have two independent brakes, several reflectors and front and back lighting when conditions require it.[31]

Australia – Bicycles are regarded as vehicles under the Road Rules in every state. A bike is required by law to have at least one functioning brake.[32]

Belgium – All bicycles are required to have easy-to-hear bells and working brakes on both wheels. Lights and reflectors are not required on race, mountain, and children's bikes when not used after dark. Other (normal) bikes need reflectors and lights. These lights may be attached to the body and may blink.[33]

Brazil – Brazilian Traffic Law, article 105, subheading VI, says that, for bicycles, "bells, rear, front, sides and pedals signaling, and rear-view mirror on the left" are mandatory.[34] Albeit, nothing is explicitly said about bicycle brakes.

Canada – Laws vary by province, and are controlled by highway and traffic acts.[35] In Ontario[36] and in Québec,[37] a rear brake is required, and not having one may subject the rider to a fine. Alberta requires one functioning brake.[38]

Denmark – All bicycles are required to have working brakes on both wheels, reflectors, and bells.[39]

France – A bike must have 2 brakes, 2 lights, numerous reflectors, and a ringer to be approved for road traffic. The laws are rarely enforced, however, and the sight of all kinds of non-officially-approved bikes is common.[40]

Germany – All bicycles are required to have working brakes on both wheels, reflectors, and bells.[41] A local court in Bonn accepted that the fixed-gear mechanism was a suitable back brake,[41] but high-profile crackdowns specifically targeted fixed-gear bicycles in Berlin in an attempt to control what police described as a "dangerous trend"[42][43]

Hungary – All bicycles are required to be equipped with two independent sets of brakes. Front and rear lamps, reflectors and a bell are also required.[44]

Italy – All bicycles must have tires, two independent sets of brakes, a bell, a front white lamp, a rear red lamp and reflector, amber reflectors on pedals and sides.[45] The laws however are rarely enforced.

Netherlands – All bicycles are required to have an adequate brake system.[46]

New Zealand – By law all bicycles must have a minimum of "...a good rear brake..."–and those made since 1 January 1988 must also have "...a good front brake..."[47]

Poland – All bicycles must have at least one functional brake.[48]

Russian Federation – All bicycles must have working brakes, handlebars and horns [49]

Singapore – In a report submitted to the Singapore Ministry of Transport in December 2020, the Active Mobility Advisory Panel recommended that a new rule be put in place to allow only bicycles that have brakes installed in order for them to be used on footpaths and roads. In January 2020, a 13-year-old fixie rider died after she crashed into a railing at a multi-storey car park and fell from height, prompting a state coroner hearing the court inquiry to declare that such bicycles are not suitable for the young. Her death was ruled as a misadventure.[50]

Spain – All bicycles are required to have an adequate brake system on front and rear wheels, plus a bell.[51]

Sweden – Bicycles are required to have a brake and bell. Additionally, when it's dark outside they are required to have lights facing forward and back as well as reflectors facing forward, back and to the sides.[52]

United Kingdom – The Pedal Cycles (Construction and Use) Regulations 1983 require pedal cycles "so constructed that one or more of the wheels is incapable of rotating independently of the pedals, be equipped with a braking system operating on the front wheel"; riding a rear-wheel drive, fixed-gear bicycle with no front brake on public highways is illegal.[53] Following the conviction of UK cyclist Charlie Alliston, who knocked over and killed a woman whilst riding a fixed-gear bicycle with no front brake, the UK Government announced a review of the laws covering "dangerous cycling" in September 2017.[54] A brake on the rear wheel is only required for free-wheel bicycles.[55]

United States – The use of any bike without brakes on public roads is illegal in many places, but the wording is often similar to "...must be equipped with a brake that will enable the person operating the cycle to make the braked wheels skid on dry, level and clean pavement..."[56] which some have argued allows the use of the legs and gears.[57] The retail sale of bikes without brakes is banned by the U.S. Consumer Product Safety Commission[58] – but with an exception for the "track bicycle" (...a bicycle designed and intended for sale as a competitive machine having tubular tires, single crank-to-wheel ratio, and no free-wheeling feature between the rear wheel and the crank...).[59]

Conversion

Many companies sell bicycle frames designed specifically for use with fixed-gear hubs. A fixed-gear or track-bike hub includes special threads for a lockring that tightens in the opposite (counter-clockwise) direction compared with the sprocket. This ensures that the sprocket cannot unscrew when the rider "backpedals" while braking.[60]

A horizontal dropout on a steel frame road bicycle converted to a single-speed. The derailleur hanger (below the axle) and an eyelet (above the axle) for mounting a fender or rack, both integral parts of the original frame, are now unused.

For a variety of reasons, many cyclists choose to convert freewheel bicycles to fixed gear. Frames with horizontal dropouts are straightforward to convert, frames with vertical dropouts less so.[61] One method is to simply replace the rear wheel with a wheel that has a track/fixed hub. Another is to use a hub designed for use with a threaded multi-speed freewheel. Such a hub only has the normal right-handed threads for the sprocket and not the reverse threads for the lockrings used on track/fixed hubs. The sprocket on a hub without a lockring may unscrew while back pedalling. Even if a bottom bracket lockring is threaded onto the hub, along with a track sprocket, because the bottom-bracket lockring is not reverse threaded, the possibility still exists that both the sprocket and locknut can unscrew. Therefore, it is recommended to have both front and rear brakes on a fixed-gear bicycle using a converted freewheel hub in case the sprocket unscrews while backpedaling. It is also advisable to use a thread sealer for the sprocket and bottom bracket locking. The rotafix (or "frame whipping") method may be helpful to securely install the sprocket.

Chain tension

Bicycles with vertical dropouts and no derailleur require some way to adjust chain tension. Most bicycles with horizontal dropouts can be tensioned by moving the wheel forward or backward in the dropouts. Bicycles with vertical dropouts can also be converted with some additional hardware. Possibilities include:

  • An eccentric hub or bottom bracket allows the off center axle or bottom bracket spindle to pivot and change the chain tension.
  • A ghost or floating chainring is an additional chainring in the drive train between the driving chainring and sprocket. The top of the chain moves it forward at the same speed that the bottom of the chain moves it backwards, giving the appearance that it is floating in the chain.
  • A magic gear—the right math can calculate a gearing ratio to fit a taut chain between the rear dropout and bottom bracket. Also, using a chain half link and slightly filing the dropouts to increase the width of the slot increases the chances of finding a magic gear. It is worth noting that the magic gear setup is controversial, due to inevitable chain stretch and subsequent slippage that can lead to serious injury.

Separate chain tensioning devices, such as the type that attaches to the dropout (commonly used on single speed mountain bikes) cannot be used because they are damaged as soon as the lower part of the chain becomes tight.

Chainline

Additional adjustments or modification may be needed to ensure a good chainline. The chain should run straight from the chainring to the sprocket, therefore both must be the same distance away from the bicycle's centerline. Matched groupsets of track components are normally designed to give a chainline of 42 mm, but conversions using road or mountain bike cranksets often use more chainline. Some hubs, such as White Industries' ENO, or the British Goldtec track hub, are better suited to this task as they have a chainline greater than standard. Failure to achieve good chainline, at best, leads to a noisy chain and increased wear, and at worst can throw the chain off the sprocket. This can result in rear wheel lockup and a wrecked frame if the chain falls between the rear sprocket and the spokes. Chainline can be adjusted in a number of ways, which may be used in combination with each other:

  • Obtaining a bottom bracket with a different spindle length, to move the chainring inboard or outboard
  • Choosing a bottom bracket with two lockrings, which gives fine adjustment of chainring position
  • Respacing and redishing the rear wheel, where permitted by the hub design
  • Placing thin spacers under the bottom bracket's right-hand cup (Sturmey-Archer make a suitable 1/16" spacer) to move the chainring outboard
  • Placing thin spacers between the chainring and its stack bolts to move it inboard (if the chainring is on the inside of the crank spider) or outboard (if the ring is on the outside of the spider)
  • Placing thin spacers between the hub shoulder and the sprocket. This is recommended in the case of a freewheel-threaded hub, which has sufficiently deep threads for this operation.

Usually, the rear hub is the best component on which to perform chainline adjustments, especially on threaded hubs. If a track hub is used, it is better to operate on the bottom bracket or - for minor shifts - on the crankset. The same occurs if a flip-flop hub is used, because the chainline should be the same in both sides (freewheel and fixed gear).[62]

Gear ratio

Since fixed-gear bicycles do not have the capability to change gears on the fly, riders must choose their preferred gear ratio beforehand. A commonly used gear ratio that works well in most situations is 2.75:1, which can be implemented with a 44-tooth chainring and a 16-tooth rear sprocket.[63]

Competition

There are many forms of competition using a fixed gear bike, most of the competitions being track races. Formal track races most often take place in a velodrome, a circular track that is constructed of concrete or wood and can be indoor or outdoor. Race types such as common scratch races or more complex omnium races take place in these arenas.

Track race taking place at the Hellyer Park Velodrome in San Jose, California

Keirin is a form of motor-paced cycle racing on a track with fixed-gear bicycle that meet a strict system of standards.

Moreover, bike messengers and other urban riders may ride fixed gear bicycles in alleycat races, which are normally held in city streets, including New York City's famous fixed-gear-only race Monstertrack alleycat. Similarly, Wolfpack Hustle began in 2005 simply as ride bringing together fast-paced bicycle riders with the common love for riding and has expanded to an internationally known race series that takes place in Los Angeles, California.[64] The group has managed to receive sponsorships from several well-known companies including Castelli, which is an over-130-year-old Italian cycling clothing brand, helping spread interest and knowledge about the group and the races they hold.[65] In San Francisco, California, Red Bull holds Red Bull Ride + Style events, which bring together both track and freestyle fixed-gear riders from around the world for competitions.[66]

There are also events based on messenger racing, such as Mixpression, which has been held nine times in Tokyo. Trick demonstrations have been held since the late 1800s in the US and Europe;[67] while they continued into a competitive form in Europe (artistic cycling), subsequent to the recent widespread popularity and advancement of fixed gear bikes, trick competitions have also now established themselves at venues in the US and Asia.[68] European competitions include solo and team balletic movements on a controlled, flat surface; US and Asian competitions often include "park" and "flatland" styles and venues, a la BMX. Other competitions include games of "foot down" and bike polo.

In 2006, Adventures for the Cure made a documentary film on riding across the United States on fixed gears; they repeated this feat as a 4-man team at the 2008 Race Across America.

Fixed gear riders sharing the specific philosophy are also seen at the Single Speed World Championships.

Maintenance and upkeep

Maintaining a fixed gear is relatively easy because it has fewer parts than a geared bicycle. The sprocket should be checked regularly to make sure there is no damage to any teeth and that no object is grinding it as it turns with the rear wheel. The chainring should be checked similarly for any damage.

There is an advantage to selecting a number of chainring teeth that is not a round multiple of the number of sprocket teeth (e.g. 3) because this avoids coincidence of the same chainring and sprocket teeth, and tyre contact patch, on each of the rider's power strokes. For riders who perform brakeless skid-stops, it is best to select prime-numbered chainrings (e.g. 41, 43 or 47 teeth) to guarantee that rear tyre wear is spread evenly.

It is imperative (for road riding, at least) that the chain is sufficiently tight that it is impossible for it to derail from either the chainring or sprocket. This generally equates to "no visible slack". A derailed chain can cause a variety of undesirable consequences, such as a locked rear wheel or, worst of all, destruction of the frame if the chain becomes caught around the pedal spindle and pulls the rear triangle forwards. On a fixed-gear bicycle without hand brakes, even a relatively benign derailment means a total loss of braking ability. Tensioning aside, a chain is significantly less likely to derail if the chainline is accurate and the chain is a traditional "full bushing" type with limited lateral flexibility. Because the difference between a tight and a slack chain equates to only very minor elongation of the links, chain tension should be visually checked at least weekly, especially if the bicycle is ridden in wet or dirty conditions.

As with any other bicycle, the chain should be checked making sure the master link is securely latched. The chain can be lubricated monthly for smooth riding.[69] Also, as needed, the brakes should be tightened as they wear and tire condition observed for possible puncture locations. Air pressure in the tires, tire alignment, brake handle placement, and rust should be monitored on a daily basis because they can change very easily during a jarring ride.

Subculture
A fixed-gear bike in China.

Fixed-gear bicycles are often associated with the hipster subculture.[70][71]

Australia

Until recently, the Australian fixie culture has been small. However, with the strong Australian dollar and cost effective manufacturing and importing from China, Australia has seen many new online stores capitalise on the cheap steel frames commonly imported to the UK and US. Online stores in Australia ship partially-assembled bikes directly to consumers, considerably undercutting prices at typical brick and mortar stores.[72]

Canada

Fixed gear bikes have become much more popular in Canada within the last couple years. Cities like Toronto, Ottawa, Vancouver and Montreal have many fixed gear riders, mostly in the downtown areas.

Fixed Gear Moscow

In 2007, a few activists started assembling and riding fixed gear bikes in Moscow.[73] There had been people riding fixed gear bikes on the street in Moscow prior that time, but it had never developed into any feasible subculture. Appearances of the design in foreign media began increasing around that time, attracting more people to the concept.

A Fixed Gear Moscow LiveJournal blog community was formed, which allowed riders to communicate with each other and share ideas for rides. As interest grew, a separate web site was created to host the blog and the forum.

Fixed Gear Moscow has organized numerous alleycat races, tournaments, and other events to keep the community growing. Several side projects have been initiated by members of Fixed Gear Moscow and are still in development.

Red Bull Fix Boulevard

In September 2013 Red Bull and Moscow government organized first race for fixed gear bikes in Moscow city center on the Boulevard ring. Distance that participants had to overcome was about 50 kilometers. The race was repeated in 2014.[74]

Community

The fixed-gear movement is growing in Sweden. A cornerstone of the Swedish fixed-gear society is the Internet-based forum Fixedgear.se, with over 6000 registered members . This makes up for the main meeting ground and discussion forum for Swedish fixed-gear riders and enthusiasts.

There are also several bicycle clubs throughout Sweden with a fixed-gear niche. Komet Club Rouler is a club based in Gothenburg, annually arranging Svart Katt and other fixed-gear oriented activities. Svart Katt has been internationally recognized and is considered Sweden's largest alley cat by number of participators, according to Cog Magazine. KCR's equivalent in Malmö is called Pista Malmø,[75] arranging ”Thursday's rides” every Thursday, for all bikes and riders. Stockholm also has its own informal fixed gear bicycle club, called Fista Sthlm.

Popularity factors

Several factors contribute to the recent rise in popularity of fixed-gear bicycle. A rider from Stockholm interviewed for an article about the phenomenon notes that riding a bike imparts a feeling of freedom to the rider. One is free to go wherever one wants, whenever one wants. A sense of belonging is also important; as the rider says, "all who cycle are my friends". Riders unknown to each other commonly greet each other when on bikes. As in many subcultures, this feeling of belonging is a key factor in recruiting and retaining participants.[76]

The fact that many fixie riders ride brakeless in defiance of local law could also be viewed as a contributing factor to its popularity; it provides an outlet for minor rebellion.[77]

California
A Cinelli MASH Histogram frame

California's fixed gear community stretches throughout the state with groups in all of the major urban areas that come together for riding and racing. Beginning in the north, Sacramento has a rising fixed-gear community as popular bicycle shops such as The Bicycle Business are beginning to carry fixed gear bikes and groups of riders are forming.[78]

Moving to the Bay Area, San Francisco and San Jose have well established fixed gear communities who host several established races and community rides. Companies such as Chrome Industries, who make bags and apparel catered toward bike messengers and urban cyclists, have been able to rise to worldwide prominence thanks to San Francisco and California's biking community.[79] Also, stores such as MASH SF based in San Francisco,[80] and IMINUSD based in San Jose[81] accommodate fixed-gear cyclist specifically with riding gear, parts, and a center for the fixed-gear riding community in their respective cities. MASH SF collaborates with the Italian bicycle manufacturing company, Cinelli, to make several fixed gear bike framesets, including what is known as the Cinelli MASH Histogram.[82] Furthermore, Macaframa is a group of riders from San Francisco who release movies dedicated to fixed-gear riding that encompass the fast-paced lifestyle that comes along with riding fixed.[83]

Lastly, Southern California is home to a very large fixed community, particularly in the greater Los Angeles area. Los Angeles based TRAFIK is a group dedicated to global fixed gear culture, as they boast the motto “TRAFIK is Global Fixed Gear Culture” and work towards bringing the fixed-gear movement to a worldwide audience.[84]

New York

New York's fixed-gear community was largely born out of bicycle messengers in New York City looking for lower maintenance bicycles that were cheaper to acquire. The popularity of fixed-gear bicycles heavily coincides with the number of alleycat races that were taking part in the 2000s, going so far as to hosting exclusively brakeless fixed-gear races.[85]

Circus bikes
A circus performer standing on a fixed-gear bicycle

A fixed gear bike is also used in the circus arts (artistic cycling). When the saddle and handlebars are at the same height, an acrobat can stand on the handlebars and saddle and perform acrobatic exercises, sometimes involving multiple people, while continuing to circle the circus ring. It can be found as a niche sport in many countries. In addition to better speed control, the use of a fixed gear bike allows the artist to ride the bike backwards and/or only on the back wheel.

The 2012 film Premium Rush uses a "fixie" as a running plot device. Wilee, the lead character played by Joseph Gordon-Levitt, works as a bike messenger in Manhattan, and his fellow riders rib him about his enthusiasm for his fixed-gear steel-frame bike with no brakes. He avoids one confrontation by pedaling the bicycle backward, and he successfully weaves through dangerous traffic, but he also gets into accidents because the fixed-gear style abets his avidity for speed. Wilee says, "I like to ride. Fixed gear. No brakes. Can't stop. Don't want to, either."[86]

In its early years the Tour de France only ever featured bikes with a fixed gear. Once coasting and gears were developed, the Tour founder Henri Desgrange is quoted to have said: “Come on, fellows! Let’s say that the test was a fine demonstration – for our grandparents! As for me: Give me a fixed gear.”[87]

See also

References
  1. Neil Bezdek (April 20, 2016). "Why I Ride a Fixed-Gear Bike". Bicycling. Retrieved 2016-11-15. A fixed-gear bike, or fixie, is a type of singlespeed bicycle that doesn't allow the rider to coast.
  2. "What Is a Fixed Gear?". Commute by Bike. 2005-05-31. Retrieved 2007-08-12.
  3. Brown, Sheldon. "Fixed Gear Bicycles for the Road". Retrieved April 11, 2012.
  4. Brown, Sheldon. "The Sturmey-Archer ASC Fixed-Gear Three-Speed Hub". Retrieved November 19, 2018. The ASC was a true fixed-gear, in that coasting was impossible...the pedals would turn whenever the bicycle was in motion. However, it gave three different ratios: direct drive; 90% and 75%.
  5. Konopka, Peter (1982). The Complete Cycle Sport Guide. EP Publishing. pp. 70–71. Top class riders spend the whole winter on such small gears (42×17 or 18)... to get good pedal training some adopt a "fixed wheel"...
  6. "History". Retrieved 2011-05-14. Modern fixed-gear bicycles are credited to Gregory Ferris
  7. "Medium gear history". UK: Fixed Wheel. Retrieved 2011-05-14.
  8. Bradley, Wayne. "Cycling memories". UK: BT Internet. Archived from the original on 2009-01-11. Retrieved 2011-05-14.
  9. "Woodland gears". UK. Retrieved 2011-05-14.
  10. "Fixed wheel bike used to win the 2003 British national hill climb championship". Retrieved 2011-05-14.
  11. Curran, Paul (1987). "British Hill Climb Championship" (article). UK: NDO.
  12. "Rotrax HS". Designs. UK: Classic lightweights. Retrieved 2011-05-14.
  13. "Bikes". KH Batesbar RB. Retrieved 2011-05-14.
  14. "Examples of fixed-gear bicycles of the period, including the bike that Ray Booty used for the first sub-four-hour "out and back" 100 mile time trial in 1956". KH Batesbar RB. Retrieved 2011-05-14.
  15. "Examples of fixed-gear bicycles of the period, including the bike that Ray Booty used for the first sub-four-hour "out and back" 100 mile time trial in 1956". Archived from the original on 2007-10-27. Retrieved 2011-05-14.
  16. Stone, Hilary. "Sturmey Archer ASC 3-speed fixed-wheel hub gear". Classic Lightweights. Archived from the original on 2007-09-15. Retrieved 2007-09-11.
  17. Hannah Karp (2006-06-08). "More riders trying "fixie" bikes with one gear, many risks". Sign On San Diego. The Union-Tribune. Retrieved 2007-08-12.
  18. Jim Miller (2006-06-18). "Quest for a Fixed Gear". Washington Post. Retrieved 2007-08-12.
  19. "Buyers' Guide To "Fixie" Bicycles!". Cyclesmith. Retrieved 2007-08-12.
  20. Lucas Wisenthal. "Bare bones biking". Montreal Mirror. 23 (2). Retrieved 2007-08-12.
  21. Meany, Terry (2001). The Complete Idiot's Guide to Bike Maintenance and Repair. Penguin. p. 158. ISBN 0028641396.
  22. Brown, Sheldon (1995-12-26), Fixed Gear Bicycles for the Road
  23. Seaton, Matt. "Fixed Idea". Rouleur. Selected extract.
  24. "About Fixed Gears". Old Skool Track. Retrieved 2007-09-11.
  25. Wisenthal, Lucas (June 28, 2007). "Bare bones biking". Montreal Mirror. Retrieved 2007-09-11.
  26. Churchill, Paul (2005-10-13). "Are Brakes For Flakes?". Moving Target. Retrieved 2007-09-16.
  27. Colegrove, Sara W.; Briggs, Todd E. "Do You Ride A Fixed Gear Bike? You May Be Breaking The Law". League of Michigan Bicyclist. Archived from the original on 2007-09-27. Retrieved 2007-09-11.
  28. Brown, Sheldon. "Fixed Gear for the Road: Skip Stops". Harris Cyclery. Retrieved 2007-09-11.
  29. Chidley, 'Buffalo' Bill (October 1993). "Track bikes at CMC 1993". Cycling Plus. Retrieved 2007-09-19.
  30. Stevenson, John (August 8, 2006). "Fixies outlawed?". Cycling News.com. Retrieved 2007-09-11.
  31. Österreich, Republik. "Fahrradverordnung". HELP.gv.at (in German). Retrieved 2018-02-10.
  32. "Hub bicycle". NSW, AU: Road Traffic Authority. Retrieved 2011-05-14.
  33. "Mobiel vlaanderen". BE: Flemish government. Retrieved 2012-08-10.
  34. "Código de Trânsito Brasileiro, lei nº 9.503, de 23 de setembro de 1997, artigo 105". BR.
  35. "Biking Across Canada". Retrieved 14 March 2017.
  36. "Highway Traffic Act 64(3)". Archived from the original on 2011-07-06.
  37. "Code de la sécurité routière, article 247".
  38. "Use of Highway and Rules of the Road Regulation, Alta Reg 304/2002".
  39. "Cykelbekendtgørelsen - Bekendtgørelse om cyklers indretning og udstyr m.v." DK: Færdselsstyrelsen. Retrieved 2015-05-21.
  40. "Bike security regulations". France: Internal affairs ministry.
  41. "Still No Fix for 'Fixies'. German Court Rules in Favor of Fixed-Gear Cyclist". Der Spiegel. DE. 2009-08-07.
  42. "New Bike Trend Could Be Deadly". Der Spiegel. DE.
  43. "Fixed-gear bikes spark police crackdown in Berlin", Society, DE: The Local, 2009-06-30.
  44. Kerékpáros kisokos (PDF), HU
  45. "Art. 68. Caratteristiche costruttive e funzionali e dispositivi di equipaggiamento dei velocipedi" [Constructive and functional features and equipment devices of bicycles] (in Italian). Retrieved 17 March 2016.
  46. "Vehicle Regulations". The Netherlands: Dutch Government.
  47. "Transport Authority Road Code for Bicycles" (PDF). New Zealand. 2009. Archived from the original (PDF) on 2010-08-01. Retrieved 2010-09-26.
  48. "Ostre koło a obowiązkowe wyposażenie rowerów". Poland. 2011.
  49. "Traffic Rules of the Russian Federation. Paragraph 6".
  50. "Panel recommends banning bicycles without brakes from footpaths and roads". Singapore: Today Online. Retrieved 2021-01-01.
  51. "Article 22 - Vehicle Regulations" (PDF). Spain: Internal affairs ministry. Archived from the original (PDF) on 6 February 2009.
  52. "Cykeln". SE: Trafikverket. Retrieved 2015-03-21.
  53. "Cyclist Charlie Alliston guilty over pedestrian's death". BBC News. 23 August 2017. Retrieved 20 September 2017.
  54. "Dangerous cycling law review after death crash". BBC News. 20 September 2017. Retrieved 21 September 2017.
  55. "The Pedal Cycles (Construction and Use) Regulations 1983". UK: British Government.
  56. "Appendices". BikeSense. Archived from the original on 2011-03-13. Retrieved 2010-10-01.
  57. "Cyclist wins fixed-gear case". Blog Archive. BikePortland. 2006-09-05. Retrieved 2010-10-01.
  58. "Requirements for Bicycles: Requirements for braking system". Code of Federal Regulations. USA: GPO. 2004-01-01. Retrieved 2010-10-01.
  59. "Requirements for Bicycles: Definitions". Code of Federal Regulations. USA: GPO. 2004. Retrieved 2010-10-01.
  60. Brown, Sheldon, "Track hub", Bicycle Glossary Tp-Tz.
  61. Brown, Sheldon. "Fixed Gear Conversions". Retrieved 2007-09-11.
  62. "How To Build A Fixed Gear Bike", Bike Showcase.
  63. "What is the best gear ratio for your fixed gear bike?", What is the best gear ratio for your fixed gear bike? Showcase.
  64. "About Wolfpack Hustle" (text). WordPress. Retrieved 2014-05-21.
  65. Castelli cycling. "Castelli" (webpage). Manifattura Valcismon S.p.A. Retrieved 2014-05-21.
  66. "Red Bull Ride + Style" (webpage). Red Bull. Retrieved 2014-05-21.
  67. lambfeed. "Old School Bike Tricks" (video). Buzzfeed. Retrieved 2010-10-01.
  68. "Fixed Gear Bikes Republic". Fixed Gear Republic. Retrieved 2010-10-01.
  69. "The General Upkeep of Your Bicycle". 2008-04-17. Retrieved 2010-09-22.
  70. Wiener, Danielle (January 17, 2012). "The Fixie Index of Places Most Entranced by Hipster Trends". The Wire. Archived from the original on October 31, 2013. Retrieved December 4, 2013.
  71. Goodman, J. (April 21, 2010). "Are there no hipsters in China? Why Chinese bicyclists have resisted the ironic fixed-gear trend that has swept the rest of the world". Slate. Retrieved December 4, 2013.
  72. "FAQ".
  73. Приблизит ельно четыре года назад в Москве стали появляться люди на максимально упрощенных по конструкции — без скоростей и тормозов — и красивых внешне велосипедах — "фиксд гирах". (in Russian), FurFur.
  74. "Fixed Gear - Red Bull". Red Bull. Retrieved 14 March 2017.
  75. Pista Malmø.
  76. "Farligt Avskalad fixed geat ger frihet och flexibel framfart", Mer, NU: Pastan.
  77. Generation Ordning förvånar med sin rökning, Kairos future.
  78. The Bicycle Business. "The Bicycle Business" (webpage). MW3 Partners, LLC. Retrieved 2014-05-21. {{cite web}}: |author= has generic name (help)
  79. "Manifesto" (webpage). Chrome Industries. Retrieved 2014-05-21.
  80. "About MASH SF" (webpage). MASH TRANSIT PRODUCTIONS. Retrieved 2014-05-21.
  81. Mark C. "About iMiNUSD" (webpage). iMiNUSD. Retrieved 2014-05-21.
  82. "MASH Histogram" (webpage). Cinelli Bicycles USA. Retrieved 2014-05-21.
  83. Colin Arlen and Colby Elrick. "Macaframa" (video). Macaframa Films. Retrieved 2014-05-21.
  84. "About TRAFIK" (webpage). TRAFIK. Retrieved 2014-05-21.
  85. Sutherland, Peter (2001). "Pedal". YouTube.
  86. Humphrey, Steven (September 20, 2011). "Blogtown: Here's that Fixie Movie You've Been Waiting For!". The Portland Mercury. Retrieved January 21, 2013.
  87. "The fixie myth - why not every fixed gear purist is a hipster". 10 October 2016.

Media related to Fixed-gear bicycles at Wikimedia Commons

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.