Focke-Wulf Volksjäger

The initial Volksjäger competition in the second half of 1944 required the use of the BMW 003 powerplant. The Focke-Wulf Volksjäger 1, the first model of the Focke-Wulf project, was an innovative-looking single-jet aircraft. It was designed to be powered by one BMW 003 A1 turbojet as an actual contract competitor to the Heinkel He 162A Spatz, the winner of the Volksjäger design competition and the selected Volksjäger aircraft to be mass-produced.

The air intake of the turbojet engine was placed in the front and the engine itself in the lower fuselage. Two possible shoulder wing configurations were designed for the Fw Volksjäger 1, straight and swept back. The wings of the swept back version spanned 7.5 m (26 ft 7 in) and had an area of 13.5 m² (161 ft²). The tail was supported by a projecting boom over the exhaust of the engine. This fighter aircraft was planned to be armed with two MK 108 cannon, placed in a frontal position on both sides of the air intakes.[1]

In some postwar English language publications, the Fw Volksjäger 1 project is referred to by the bogus name "Volksflugzeug", a name that is not found in any German-language source referring to this aircraft, but referring instead to a very different Nazi aviation project.[2]

Designed for early 1945 RLM requirements the Focke-Wulf Volksjäger 2 was a small rocket-powered interceptor. It had a wingspan of 4.8 m (15 ft 9 in) and a length of 5.3 m (17 ft 5 in). Power was to be provided by a Walter HWK 109-509 A-2 rocket engine that would enable it to reach speeds nearing 1000 km/h. Armament was to be two 30 mm (1.18 in) MK 108 cannon located under the fuselage.

In order to save strategic materials, the wings of the Fw Volksjäger 2 were built of wood and covered with a thin metal layer. The wings, swept back and mounted on mid-fuselage, as well as the T-tail, were similar to those of the Focke-Wulf Ta 183. The aircraft had no wheels, only a landing skid. It was designed to take off on a detachable dolly. Once airborne it would speed almost vertically towards the bomber combat box where it would fire its cannon.

Although the Fw Volksjäger 2 was planned to reach an altitude of 5,900 m in one minute, its effectiveness as an interceptor was curtailed by the fact that it would have only about 15 minutes of combat action time. Test flights for this aircraft were scheduled to be carried out between May and June 1945. Three units of the Fw Volksjäger 2 were under construction at the time of the Surrender of Nazi Germany.[3]

General characteristics

• Crew: one
• Length: 8.8 m (28 ft 9 in)
• Wingspan: 7.5 m (26 ft 7 in) [1] swept back
• Height: 2.85 m (9 ft 4 in)
• Wing area: 13.5 m² (145 sq ft) swept back
• Gross weight: 3,050 kg (6,723 lb)
• Powerplant: 1 × BMW 003 A1 turbojet, 5.87 kN (1,320 lbf) thrust at 8,000 rpm

Performance

• Maximum speed: 820 km/h (509 mph, 442 kn)

Armament
2 × 30mm MK 108 cannons in nose[1]

General characteristics

• Crew: 1
• Length: 5.3 m (17 ft 5 in)
• Wingspan: 4.8 m (15 ft 9 in) [1]
• Height: 2.7 m (8 ft 10 in)
• Empty weight: 180 kg (396 lb)
• Powerplant: 1 × Walter HWK 109-509 A-2 rocket engine, 16.6 kN (3,740 lbf) thrust

Performance

• Maximum speed: 1,000 km/h (620 mph, 540 kn) [1] (621 Mph)

Armament
2 × 30mm MK 108 cannons in the lower fuselage