Vehicle weight

The dry weight of a motorcycle excludes some or all of the following: gasoline (or other fuel), engine oil, coolant, brake fluid, or battery.

There is no standardized way to test the dry weight of a motorcycle. Inconsistencies will almost always be found between a motorcycle manufacturer's published dry weight and motorcycle press and media outlet's published dry weight. This is due to different testing techniques, differences in what is being excluded, and a lack of defining how testing was conducted by the organization doing the testing.

The gross vehicle weight rating (GVWR), or gross vehicle mass (GVM), is the maximum operating weight/mass of a vehicle as specified by the manufacturer[6] including the vehicle's chassis, body, engine, engine fluids, fuel, accessories, driver, passengers and cargo but excluding that of any trailers.[7]

The weight of a vehicle is influenced by passengers, cargo, even fuel level, so a number of terms are used to express the weight of a vehicle in a designated state. Gross combined weight rating (GCWR) refers to the total mass of a vehicle including all trailers. GVWR and GCWR are used to specify weight limitations and restrictions. Gross trailer weight rating specifies the maximum weight of a trailer and the gross axle weight rating specifies the maximum weight on any particular axle.

A car driver licence is limited to driving vehicles up to a maximum GVM of 4,500 kg (9,921 lb). Beyond this, a different class of licence is required. A vehicle with a GVM up to 4,500 kg is termed a light vehicle, while those over 4,500 kg are termed heavy vehicles.

Many models of small trucks are manufactured to have a GVM rating of 5,000 to 7,000 kg (11,023 to 15,432 lb) but sold with the option of a GVM of just under 4,500 kg so that they can be driven on a car licence.

Many minor roads, including some in rural areas and some in suburban areas, have GVM restrictions such as 5,000 kg or 8,000 kg. These restrictions may be applied for technical reasons such as load limited bridges, or as a method of reducing the number of heavy vehicles on local roads.

A standard car driving licence issued by an EU country (i.e. class B) limits the licence-holder to driving vehicles with a "maximum authorised mass" (i.e. GVWR)[8] of 3,500 kg (7,700 lb). This includes holders of UK class B driving licences who passed their driving tests on or after 1 January 1997.

A UK driving licence holder who passed his or her class B driving test in or before 1996 is limited to driving vehicles with a GVWR of 7,500 kg (16,500 lb) or less, including minibuses not used for hire or reward.

Anyone looking to drive a heavy goods vehicle (i.e. any vehicle other than those used for passenger transport) with a GVWR of over 7,500 kg (16,500 lb) must obtain a class C licence. Anyone looking to drive any vehicle with a GVWR of up to 3,500–7,500 kg (7,700–16,500 lb) must obtain a class C1 licence. Anyone with a class C licence can drive class C1 vehicles.[9]

In the United States, two important GVWR limitations are 6,000 and 8,500 pounds [lb] (2,722 and 3,856 kg). Vehicles over 6,000 lb are restricted from some city roadways, although it is not always clear if this restriction is for actual curb weight or GVWR. Commercial vehicles over the 8,500 lb threshold are required to have insurance under the Motor Carrier Act of 1980 and 49 CFR 387.303.

Vehicles or combinations with a GVWR over 26,000 lb (11,793 kg) generally require a Commercial Driver License (CDL) or a Non-Commercial Class "A" or "B" license. A CDL is also required for certain vehicles under 26,000 lb GVWR, such as buses and for-hire passenger vehicles of 16 or more passengers, all vehicles transporting placarded hazardous materials or wastes regardless of weight or load class, and any vehicle towing a trailer with a Gross Trailer Weight over 10,000 lb (4,536 kg) where the combined weight is greater than 26,000 lbs.

Laws vary from state to state, but typically vehicles over 10,000 lb are required to stop at weigh stations. Sometimes large passenger or non-commercial vehicles such as RVs are exempt from this. Additionally, many states use the GVWR for registration purposes, where over a certain weight such as 8,000 lb, a mill rate is applied to the GVWR to arrive at a registration fee.

On vehicles designed for the North American market, the GVWR can be found alongside other vehicle technical specifications on the Vehicle ID Plate that is usually located on the interior of the B-pillar according to U.S. or Canadian Federal Motor Vehicle Safety Standards (inside the driver's door, near the door latch).[10]

Most U.S. and Australian commercial trucks are required by licensing authorities to have this information printed on the outside of the vehicle, and for it to be clearly visible from a specified distance.

The gross trailer weight rating (GTWR) is the total mass of a road trailer that is loaded to capacity, including the weight of the trailer itself, plus fluids and cargo, that a vehicle is rated to tow by the manufacturer. In the United States and Canada, the static tongue load, the weight of the trailer as measured at the trailer coupling, is generally recommended to be 10–15% of the GTWR.

In the United States and Canada, there are four main weight classes of trailer hitches as defined by the Society of Automotive Engineers (SAE):

• Class I – rated to 2,000 pounds (907 kg)
• Class II – rated to 3,500 pounds (1,588 kg)
• Class III – rated to 5,000 pounds (2,268 kg)
• Class IV – rated to 10,000 pounds (4,536 kg)

The gross combined weight rating or gross combination weight rating (GCWR), also referred to as the gross combination mass (GCM), gross train weight (GTW), is the maximum allowable combined mass of a road vehicle, the passengers and cargo in the tow vehicle, plus the mass of the trailer and cargo in the trailer.[11][12] This rating is set by the vehicle manufacturer.

The GCWR is a function of the torque output of the engine, the capacity and ratios of the transmission, the capacity of the driving axles and tires, the capacity of the radiator, and the ability of the chassis to withstand that torque.

The gross axle weight rating (GAWR) is the maximum distributed weight that may be supported by an axle of a road vehicle. Typically, GAWR is followed by either the letters FR or RR, which indicate front or rear axles respectively.

Road damage rises steeply with axle weight, and is estimated "as a rule of thumb... for reasonably strong pavement surfaces" to be proportional to the fourth power of the axle weight.[13] This means that doubling the axle weight will increase road damage (2x2x2x2)=16 times.[14][15] For this reason, trucks with a high axle weight are heavily taxed in most countries.

Examples of GAWR on common axles:

In the EU and U.S. legal maximum load restrictions are placed on weight, independent of the manufacturer's rating. In the EU a tractor can generally have 10 tonnes (22,000 lb) on a single axle, with suspension type and number of tires often allowing slightly higher loads. In the U.S. weight restrictions are generally 20,000 pounds (9,100 kg) on a single axle, and 34,000 pounds (15,000 kg) (less than two single axles) on a tandem. The primary factor is distance between axle centerlines, also used to measure bridge formulas. A bridge formula does not reduce axle load allowance, rather gross vehicle weight (GVW), which can affect load distribution and actual axle weights.[16][17][18]