International Terrestrial Reference System and Frame

The International Terrestrial Reference System (ITRS) describes procedures for creating reference frames suitable for use with measurements on or near the Earth's surface. This is done in much the same way that a physical standard might be described as a set of procedures for creating a realization of that standard. The ITRS defines a geocentric system of coordinates using the SI system of measurement.

ITRF reference stations

An International Terrestrial Reference Frame (ITRF) is a realization of the ITRS. Its origin is at the center of mass of the whole earth including the oceans and atmosphere. New ITRF solutions are produced every few years, using the latest mathematical and surveying techniques to attempt to realize the ITRS as precisely as possible. Due to experimental error, any given ITRF will differ very slightly from any other realization of the ITRF. The difference between the latest as of 2006 WGS 84 (frame realisation G1150) and the latest ITRF2000 is only a few centimeters and RMS difference of one centimeter per component.[1]

The ITRS and ITRF solutions are maintained by the International Earth Rotation and Reference Systems Service (IERS). Practical navigation systems are in general referenced to a specific ITRF solution, or to their own coordinate systems which are then referenced to an ITRF solution. For example, the Galileo Terrestrial Reference Frame (GTRF) is used for the Galileo navigation system; currently defined as ITRF2005 by the European Space Agency.[2]

Versions

The ITRF realizations developed from the ITRS since 1991 include the following versions:[3]

Name Ref.

epoch

 EPSG
code		 Notes
ITRF91 1988.0 4913

7903 8991
ITRF92 1988.0 4914

7904 8992

 First realization of the ITRS
ITRF93 1988.0 4915

7905 8993
ITRF94 1993.0 4916

7906 8994
ITRF96 1997.0 4917

7907 8995
ITRF97 1997.0 4918

7908 8996
ITRF2000 1997.0 4919

7909 8997

 First solution that combines unconstrained space geodesy solutions free from any tectonic plate motion model.[4]

From this version onwards, the motion of the tectonic plate is represented in the solution for each station as a velocity vector. Previous ITRFs only continued the initial positions, using a motion model to fill in the velocity.

ITRF2005 2000.0 4896

7910 8998

 Constructed with input data under the form of time series of station positions and Earth Orientation Parameters.[5]

This version introduces extra parameters to describe the year-periodic motion of the stations: A (amplitude) and φ (phase) per-axis. This sort of seasonal variation has an amplitude of around 1 cm and is attributed to non-tidal loading effects (e.g. the shifting weight of water).

ITRF2008 2005.0 5332

7911

8999

 Includes tropospheric modeling and improved solution methods.[6]
ITRF2014 2010.0 7789

7912 9000

 Generated with an enhanced modeling of nonlinear station motions.[7] Specifically:
  • a semiannual component is added to the traditional annual periodic model;
  • smooth parametric fits are to model post-seismic deformation as opposed to the traditional approach using piecewise linear functions.
ITRF2020 2015.0 9988

9989 9990

 [8]

Users

GNSS systems:[2]

  • Galileo Terrestrial Reference Frame (GTRF), ITRF2005; own implementation using IGS sites.
  • GPS WGS 84 of 2013, ITRF2008; International GNSS Service (IGS) implementation.
  • BeiDou Coordinate System, China Terrestrial Reference Frame (CTRF) 2000 = ITRF97 at epoch 2000.0; own implementation.
  • GLONASS PZ-90.11 is nominally its own system, but is quite close to ITRF and uses many of the same techniques.[2]

National systems:

  • United States: WGS 84 (see above); domestic use is mainly based on NAD 83 instead.
  • China: CTRF 2000 per above.

The GPS reference epoch was moved from 2000.0 to 2001.0 in G1150 due to an Alaskan earthquake in November 2002. Still in 2022 ITRF2020 was released, yet GPS is only using G2139 in its antennas, which was aligned to ITRF2014 (IGb14) (though at epoch 2016.0, not reference epoch 2010.0).[9] On 27 November 2022 move to IGS20 is planned, so WGS 84 will be aligned with ITRF2020, including PSD (post-seismic deformation), soon to be G2238.

On the other hand GLONASS is using PZ-90.11, which is close to ITRF2008 at epoch 2011.0 and is using 2010.0 epoch (that means when you use reference transformation to PZ-90.11 you will get January 2010 date).

See also

References
  1. Clynch, James R. (February 2006). "Earth coordinates" (PDF). GPS Geodesy and Geophysics. James R. Clynch. Retrieved 24 March 2016.
  2. "Reference Frames in GNSS". Navipedia. European Space Agency.
  3. "International Terrestrial Reference Frame 2014 (ITRF2014)". Quality Positioning Services B.V. Retrieved 3 October 2019.
  4. Altamimi, Zuheir; Sillard, Patrick; Boucher, Claude (2002). "ITRF2000: A new release of the International Terrestrial Reference Frame for earth science applications". Journal of Geophysical Research: Solid Earth. 107 (B10): ETG 2-1–ETG 2-19. Bibcode:2002JGRB..107.2214A. doi:10.1029/2001JB000561.
  5. Altamimi, Z.; Collilieux, X.; Legrand, J.; Garayt, B.; Boucher, C. (2007). "ITRF2005: A new release of the International Terrestrial Reference Frame based on time series of station positions and Earth Orientation Parameters". Journal of Geophysical Research: Solid Earth. 112 (B9): B09401. Bibcode:2007JGRB..112.9401A. doi:10.1029/2007JB004949. hdl:10338.dmlcz/141752.
  6. Altamimi, Zuheir; Collilieux, Xavier; Métivier, Laurent (3 February 2011). "ITRF2008: an improved solution of the international terrestrial reference frame". Journal of Geodesy. 85 (8): 457–473. Bibcode:2011JGeod..85..457A. doi:10.1007/s00190-011-0444-4.
  7. Altamimi, Zuheir; Rebischung, Paul; Métivier, Laurent; Collilieux, Xavier (2016). "ITRF2014: A new release of the International Terrestrial Reference Frame modeling nonlinear station motions". Journal of Geophysical Research: Solid Earth. 121 (8): 6109–6131. Bibcode:2016JGRB..121.6109A. doi:10.1002/2016JB013098.
  8. "ITRF | Itrf2020". itrf.ign.fr. Retrieved 2022-06-18.
  9. US Department of Commerce, National Oceanic and Atmospheric Administration. "Transitioning from IGS14 to IGb14 - National Geodetic Survey". geodesy.noaa.gov. Retrieved 28 June 2022.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.