Gear housing

The gear housing is a mechanical housing that surrounds the mechanical components of a gear box. It provides mechanical support for the moving components, a mechanical protection from the outside world for those internal components, and a fluid-tight container to hold the lubricant that bathes those components.

Types of housings

A split housing is like a walnut shell, the housing is divided in two parts, and lower part that tie down the Gear Box to the structure, support all the components during the assembly stage and hold the lubrication oil; and the upper part that complete the enclosure and provide mechanical integrity to the Housing. The upper and lower parts of the housing have a mating surface that seals perfectly the housing to avoid oil leaks and fatigue of the housing.

A bathtub housing is made on a single piece and have a top opening for servicing the gear box and side opening to accommodate the bearing housing associated to the gear shafts. Have in general a better leak free performance but is more difficult to assemble and repair.

Housing for a Triumph gearbox.

Methods of manufacture

Traditionally, it is made from cast iron or cast aluminium, using methods of permanent mold casting[1] or shell molding.[2] Experimentally, though, composite materials have also been used.[3]

See also

References
  1. Todd, Allen & Alting 1994, pp. 258–262.
  2. Degarmo, Black & Kohser 2003, p. 308.
  3. "Affordable Helicopter Drive Train Housings" (PDF). U.S. Army ManTech. Archived from the original (PDF) on 23 July 2007. Retrieved 5 January 2012.

Bibliography
  • Todd, Robert H.; Allen, Dell K.; Alting, Leo (1994), Manufacturing Processes Reference Guide, Industrial Press Inc., ISBN 0-8311-3049-0
  • Degarmo, E. Paul; Black, J. T.; Kohser, Ronald A. (2003), Materials and Processes in Manufacturing (9th ed.), Wiley, ISBN 0-471-65653-4
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.