HVDC DolWin2

HVDC DolWin2 is a high voltage direct current (HVDC) link to transmit offshore wind power to the power grid of the German mainland. The project differs from most HVDC systems in that one of the two converter stations is built on a platform in the sea. Voltage-Sourced Converters with DC ratings of 900 MW, ±320 kV are used and the total cable length is 135 km. The project is similar to the HVDC DolWin1 project but has a slightly higher power rating and uses a different design of offshore platform. The platform was designed by Norwegian company Aibel[1] and built by Drydocks World in Dubai[2] and transported to Europe in the summer of 2014[3] to be fitted out at the Aibel yard in Haugesund in Norway.[4][5][6] The platform, which is of a floating, self-installing design not previously used in an HVDC project, sailed out from Haugesund on 1 August 2015[7] and was installed in the North Sea ten days later.[8]

DolWin2
The DolWin Beta platform arriving in Haugesund in August 2014.
The DolWin Beta platform arriving in Haugesund in August 2014.
Map of DolWin2
Location
CountryGermany
FromDolWin Beta Offshore Converter Platform
Passes throughNorth Sea
ToDörpen West Converter Station
Ownership information
OwnerTenneT
OperatorTenneT
Technical information
Total length135 km (84 mi)
Power rating900 MW
DC voltage320 kV

The overall project was built by ABB and was handed over to its owner, TenneT, in 2017.

Connected wind farms

See also

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.