High-density polyethylene

HDPE is known for its high strength-to-density ratio.[4] The density of HDPE ranges from 930 to 970 kg/m³.[5] The standard method to test plastic density is ISO 1183 part 2 (gradient columns), alternatively ISO 1183 part 1 (MVS2PRO density analyzer).[6] Although the density of HDPE is only marginally higher than that of low-density polyethylene, HDPE has little branching, giving it stronger intermolecular forces and tensile strength (38 MPa versus 21 MPa) than LDPE.[7] The difference in strength exceeds the difference in density, giving HDPE a higher specific strength.[8] It is also harder and more opaque and can withstand somewhat higher temperatures (120 °C/248 °F for short periods). High-density polyethylene, unlike polypropylene, cannot withstand normally required autoclaving conditions. The lack of branching is ensured by an appropriate choice of catalyst (e.g., Ziegler–Natta catalysts) and reaction conditions.

HDPE is resistant to many different solvents, and is exceptionally challenging to glue; joints are typically made by welding.

The physical properties of HDPE can vary depending on the molding process that is used to manufacture a specific sample; to some degree, a determining factor is the international standardized testing methods employed to identify these properties for a specific process. For example, in rotational molding, to identify the environmental stress crack resistance of a sample, the notched constant tensile load test (NCTL) is put to use.[9]

Owing to these desirable properties, pipes constructed out of HDPE are ideally applicable for drinking water[10] and waste water (storm and sewage).[11]

• 
  HDPE fibers can be spun into rope
• 
  Disposable suits; nonwoven HDPE fabric
• 
  Housewrap
• 
  Plastic mailing envelopes
• 
  Flexible HDPE pipes
• 
  Corrugated HDPE pipe installation in storm drain project in Mexico
• 
  The monobloc chair
• 
  Bottle crates
• 
  Toys and playground equipment
• 
  Clear plastic bags (shown) are made of LDPE; blown-film shopping bags with handles are now made of HDPE
• 
  HDPE is used to make sturdy bottles that resist oils. Transparent bottles are usually made of other plastics, such as polyethylene terephthalate
• 
  Milk jug
• 
  HDPE jerrycans resist softening and swelling from aromatic components of fuels
• 
  Roller on HDPE construction entrance mat

HDPE has a wide variety of applications; for applications that fall within the properties of other polymers, the choice to use HDPE is usually economic:

HDPE sheet which has been extrusion welded

HDPE is also used for cell liners in United States subtitle D sanitary landfills, wherein large sheets of HDPE are either extrusion welded or wedge welded to form a homogeneous chemical-resistant barrier, with the intention of preventing the pollution of soil and groundwater by the liquid constituents of solid waste.

HDPE is preferred by the pyrotechnics trade for mortars over steel or PVC tubes, being more durable and safer: HDPE tends to rip or tear in a malfunction instead of shattering and becoming shrapnel like the other materials.

Milk bottles, jugs, and other hollow goods manufactured through blow molding are the most important application area for HDPE, accounting for one-third of worldwide production, or more than 8 million tonnes.

Above all, China, where beverage bottles made from HDPE were first imported in 2005, is a growing market for rigid HDPE packaging, as a result of its improving standard of living. In India and other highly populated, emerging nations, infrastructure expansion includes the deployment of pipes and cable insulation made from HDPE.[2] The material has benefited from discussions about possible health and environmental problems caused by PVC and polycarbonate associated bisphenol A (BPA), as well as its advantages over glass, metal, and cardboard.

• HDPE Nets details