Hispano-Suiza J12

The Hispano-Suiza J12 is a luxury automobile that was made by Hispano-Suiza in France from 1931 to 1938.[5] It was the largest and most expensive car ever built by Hispano-Suiza.[2][3] It replaced the Hispano-Suiza H6.[6] The J12 was only available as a chassis, buyers having to arrange with an outside coachbuilder to integrate a body.[11]

Hispano-Suiza J12
1933 Hispano-Suiza J12 Sport Torpedo
Overview
ManufacturerHispano-Suiza
Also called
Production1931–1938
Assembly
Designer
Body and chassis
ClassLuxury car
Body styleby arrangement with the customer's coachbuilder
LayoutFMR
Powertrain
Engine
  • 9,424 cc (575.1 cu in) OHV V-12
  • (11,310 cc (690.2 cu in) from 1935 on)[5]
Transmission3-speed manual
Dimensions
Wheelbase
Chronology
PredecessorHispano-Suiza H6[6]

Hispano-Suiza suspended automobile production in 1938 to concentrate on the manufacture of aircraft engines.[12][13]

Mechanical features

1934 J12 phaeton limousine

The J12 was powered by a 60° V12 engine with pushrod-operated overhead valves and a seven-bearing crankshaft.[1] The engine initially displaced 9.4 L (574 cu in)[1][6] with bore and stroke both being 100 mm (3.9 in) and with a compression ratio of 5.0:1,[1] delivered 220 hp at 3000 rpm.[1][6] Two cars were fitted with long-stroke engines displacing 11.3 L (690 cu in) and delivering 250 hp, and several J12s were later upgraded to the larger engine.[11] Each engine block was machined from a single 700 lb (318 kg) billet.[6]

To demonstrate the high quality engineering and reliability of the J12, one car was driven from Paris to Nice and back without needing oil or water.[11]

The J12 of the Spanish Head of State

In 1935 the Spanish Government placed an order for a J12 as ceremonial car for the President of the Republic. The body was to be a four-door convertible, built by Carrosserie Vanvooren of Paris. When the Spanish Civil War broke out in 1936, the bodied car was still in the French Hispano-Suiza plant, and in 1938 Miguel Mateu y Pla, one of the owners of the company, decided to deliver it to the Nationalists side. The car was then sent to the Fichet plant in Marseille to receive its armor plate and eventually delivered to the then new Spanish Government. It was first used by their Head of State, General Franco, in the Victory parade held in Madrid in May 19th, 1939.[14]

In 1952 this J12 was replaced by a Rolls-Royce Phantom IV. This was the only convertible out of the three Mulliner-bodied Phantom IV purchased by the Spanish Government; all of them are still in use in present days at the service of the Spanish royal family.

The J12 of the Shah Of Iran

Mohammad Reza Shah was given a J12 by his father in 1931 at the age of 12, right before taking part in Institut Le Rosey school in Switzerland. Body was made by Paris-based body maker Carrosserie J. Saoutchik and used Swiss engineer Marc Birkigt's V12 engine.

Notes

  1. Rogliatti 1973, p. 77.
  2. Kimes 1990, p. 646.
  3. Nicholson 1982, p. 307.
  4. Kimes 1990, p. 642.
  5. Robson 1990, p. 72.
  6. Scott 1991, p. 52.
  7. Robson 2001, pp. 248–249.
  8. Given as 134+12 in (3,420 mm) in Kimes 1990, p. 648
  9. Kimes 1990, p. 648.
  10. Given as 157+34 in (4,010 mm) in Kimes 1990, p. 648
  11. Cheetham, Craig (2004). Vintage Cars - The Finest Prewar Automobiles. Rochester, United Kingdom: Grange Books. p. 105. ISBN 1840136359.
  12. Robson 1990, p. 73.
  13. Kimes 1990, p. 651.
  14. "El tipo 68". Automóviles Hispano-Suiza. Retrieved 31 January 2020.

References


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.