Hopcroft–Karp algorithm

A vertex that is not the endpoint of an edge in some partial matching ${\displaystyle M}$ is called a free vertex. The basic concept that the algorithm relies on is that of an augmenting path, a path that starts at a free vertex, ends at a free vertex, and alternates between unmatched and matched edges within the path. It follows from this definition that, except for the endpoints, all other vertices (if any) in augmenting path must be non-free vertices. An augmenting path could consist of only two vertices (both free) and single unmatched edge between them.

If ${\displaystyle M}$ is a matching, and ${\displaystyle P}$ is an augmenting path relative to ${\displaystyle M}$, then the symmetric difference of the two sets of edges, ${\displaystyle M\oplus P}$, would form a matching with size ${\displaystyle |M|+1}$. Thus, by finding augmenting paths, an algorithm may increase the size of the matching.

Conversely, suppose that a matching ${\displaystyle M}$ is not optimal, and let ${\displaystyle P}$ be the symmetric difference ${\displaystyle M\oplus M^{*}}$ where ${\displaystyle M^{*}}$ is an optimal matching. Because ${\displaystyle M}$ and ${\displaystyle M^{*}}$ are both matchings, every vertex has degree at most 2 in ${\displaystyle P}$. So ${\displaystyle P}$ must form a collection of disjoint cycles, of paths with an equal number of matched and unmatched edges in ${\displaystyle M}$, of augmenting paths for ${\displaystyle M}$, and of augmenting paths for ${\displaystyle M^{*}}$; but the latter is impossible because ${\displaystyle M^{*}}$ is optimal. Now, the cycles and the paths with equal numbers of matched and unmatched vertices do not contribute to the difference in size between ${\displaystyle M}$ and ${\displaystyle M^{*}}$, so this difference is equal to the number of augmenting paths for ${\displaystyle M}$ in ${\displaystyle P}$. Thus, whenever there exists a matching ${\displaystyle M^{*}}$ larger than the current matching ${\displaystyle M}$, there must also exist an augmenting path. If no augmenting path can be found, an algorithm may safely terminate, since in this case ${\displaystyle M}$ must be optimal.

An augmenting path in a matching problem is closely related to the augmenting paths arising in maximum flow problems, paths along which one may increase the amount of flow between the terminals of the flow. It is possible to transform the bipartite matching problem into a maximum flow instance, such that the alternating paths of the matching problem become augmenting paths of the flow problem. It suffices to insert two vertices, source and sink, and insert edges of unit capacity from the source to each vertex in ${\displaystyle U}$, and from each vertex in ${\displaystyle V}$ to the sink; and let edges from ${\displaystyle U}$ to ${\displaystyle V}$ have unit capacity.[6] A generalization of the technique used in Hopcroft–Karp algorithm to find maximum flow in an arbitrary network is known as Dinic's algorithm.

The algorithm may be expressed in the following pseudocode.

Input: Bipartite graph ${\displaystyle G(U\cup V,E)}$

Output: Matching ${\displaystyle M\subseteq E}$

${\displaystyle M\leftarrow \emptyset }$

repeat

${\displaystyle {\mathcal {P}}\leftarrow \{P_{1},P_{2},\dots ,P_{k}\}}$ maximal set of vertex-disjoint shortest augmenting paths

${\displaystyle M\leftarrow M\oplus (P_{1}\cup P_{2}\cup \dots \cup P_{k})}$

until ${\displaystyle {\mathcal {P}}=\emptyset }$

In more detail, let ${\displaystyle U}$ and ${\displaystyle V}$ be the two sets in the bipartition of ${\displaystyle G}$, and let the matching from ${\displaystyle U}$ to ${\displaystyle V}$ at any time be represented as the set ${\displaystyle M}$. The algorithm is run in phases. Each phase consists of the following steps.

• A breadth-first search partitions the vertices of the graph into layers. The free vertices in ${\displaystyle U}$ are used as the starting vertices of this search and form the first layer of the partitioning. At the first level of the search, there are only unmatched edges, since the free vertices in ${\displaystyle U}$ are by definition not adjacent to any matched edges. At subsequent levels of the search, the traversed edges are required to alternate between matched and unmatched. That is, when searching for successors from a vertex in ${\displaystyle U}$, only unmatched edges may be traversed, while from a vertex in ${\displaystyle V}$ only matched edges may be traversed. The search terminates at the first layer ${\displaystyle k}$ where one or more free vertices in ${\displaystyle V}$ are reached.
• All free vertices in ${\displaystyle V}$ at layer ${\displaystyle k}$ are collected into a set ${\displaystyle F}$. That is, a vertex ${\displaystyle v}$ is put into ${\displaystyle F}$ if and only if it ends a shortest augmenting path.
• The algorithm finds a maximal set of vertex disjoint augmenting paths of length ${\displaystyle k}$. (Maximal means that no more such paths can be added. This is different from finding the maximum number of such paths, which would be harder to do. Fortunately, it is sufficient here to find a maximal set of paths.) This set may be computed by depth-first search (DFS) from ${\displaystyle F}$ to the free vertices in ${\displaystyle U}$, using the breadth first layering to guide the search: the DFS is only allowed to follow edges that lead to an unused vertex in the previous layer, and paths in the DFS tree must alternate between matched and unmatched edges. Once an augmenting path is found that involves one of the vertices in ${\displaystyle F}$, the DFS is continued from the next starting vertex. Any vertex encountered during the DFS can immediately be marked as used, since if there is no path from it to ${\displaystyle U}$ at the current point in the DFS, then that vertex can't be used to reach ${\displaystyle U}$ at any other point in the DFS. This ensures ${\displaystyle O(|E|)}$ running time for the DFS. It is also possible to work in the other direction, from free vertices in ${\displaystyle U}$ to those in ${\displaystyle V}$, which is the variant used in the pseudocode.
• Every one of the paths found in this way is used to enlarge ${\displaystyle M}$.

The algorithm terminates when no more augmenting paths are found in the breadth first search part of one of the phases.

Each phase consists of a single breadth first search and a single depth-first search. Thus, a single phase may be implemented in ${\displaystyle O(|E|)}$ time. Therefore, the first ${\displaystyle {\sqrt {|V|}}}$ phases, in a graph with ${\displaystyle |V|}$ vertices and ${\displaystyle |E|}$ edges, take time ${\displaystyle O(|E|{\sqrt {|V|}})}$.

Each phase increases the length of the shortest augmenting path by at least one: the phase finds a maximal set of augmenting paths of the given length, so any remaining augmenting path must be longer. Therefore, once the initial ${\displaystyle {\sqrt {|V|}}}$ phases of the algorithm are complete, the shortest remaining augmenting path has at least ${\displaystyle {\sqrt {|V|}}}$ edges in it. However, the symmetric difference of the eventual optimal matching and of the partial matching M found by the initial phases forms a collection of vertex-disjoint augmenting paths and alternating cycles. If each of the paths in this collection has length at least ${\displaystyle {\sqrt {|V|}}}$, there can be at most ${\displaystyle {\sqrt {|V|}}}$ paths in the collection, and the size of the optimal matching can differ from the size of ${\displaystyle M}$ by at most ${\displaystyle {\sqrt {|V|}}}$ edges. Since each phase of the algorithm increases the size of the matching by at least one, there can be at most ${\displaystyle {\sqrt {|V|}}}$ additional phases before the algorithm terminates.

Since the algorithm performs a total of at most ${\displaystyle 2{\sqrt {|V|}}}$ phases, it takes a total time of ${\displaystyle O(|E|{\sqrt {|V|}})}$ in the worst case.

In many instances, however, the time taken by the algorithm may be even faster than this worst case analysis indicates. For instance, in the average case for sparse bipartite random graphs, Bast et al. (2006) (improving a previous result of Motwani 1994) showed that with high probability all non-optimal matchings have augmenting paths of logarithmic length. As a consequence, for these graphs, the Hopcroft–Karp algorithm takes ${\displaystyle O(\log |V|)}$ phases and ${\displaystyle O(|E|\log |V|)}$ total time.

For sparse graphs, the Hopcroft–Karp algorithm continues to have the best known worst-case performance, but for dense graphs (${\displaystyle |E|=\Omega (|V|^{2})}$) a more recent algorithm by Alt et al. (1991) achieves a slightly better time bound, ${\displaystyle O\left(|V|^{1.5}{\sqrt {\frac {|E|}{\log |V|}}}\right)}$. Their algorithm is based on using a push-relabel maximum flow algorithm and then, when the matching created by this algorithm becomes close to optimum, switching to the Hopcroft–Karp method.

Several authors have performed experimental comparisons of bipartite matching algorithms. Their results in general tend to show that the Hopcroft–Karp method is not as good in practice as it is in theory: it is outperformed both by simpler breadth-first and depth-first strategies for finding augmenting paths, and by push-relabel techniques.[7]

The same idea of finding a maximal set of shortest augmenting paths works also for finding maximum cardinality matchings in non-bipartite graphs, and for the same reasons the algorithms based on this idea take ${\displaystyle O({\sqrt {|V|}})}$ phases. However, for non-bipartite graphs, the task of finding the augmenting paths within each phase is more difficult. Building on the work of several slower predecessors, Micali & Vazirani (1980) showed how to implement a phase in linear time, resulting in a non-bipartite matching algorithm with the same time bound as the Hopcroft–Karp algorithm for bipartite graphs. The Micali–Vazirani technique is complex, and its authors did not provide full proofs of their results; subsequently, a "clear exposition" was published by Peterson & Loui (1988) and alternative methods were described by other authors.[8] In 2012, Vazirani offered a new simplified proof of the Micali-Vazirani algorithm.[9]

/* 
 G = U ∪ V ∪ {NIL}
 where U and V are the left and right sides of the bipartite graph and NIL is a special null vertex
*/
  
function BFS() is
    for each u in U do
        if Pair_U[u] = NIL then
            Dist[u] := 0
            Enqueue(Q, u)
        else
            Dist[u] := ∞
    Dist[NIL] := ∞
    while Empty(Q) = false do
        u := Dequeue(Q)
        if Dist[u] < Dist[NIL] then
            for each v in Adj[u] do
                if Dist[Pair_V[v]] = ∞ then
                    Dist[Pair_V[v]] := Dist[u] + 1
                    Enqueue(Q, Pair_V[v])
    return Dist[NIL] ≠ ∞

function DFS(u) is
    if u ≠ NIL then
        for each v in Adj[u] do
            if Dist[Pair_V[v]] = Dist[u] + 1 then
                if DFS(Pair_V[v]) = true then
                    Pair_V[v] := u
                    Pair_U[u] := v
                    return true
        Dist[u] := ∞
        return false
    return true

function Hopcroft–Karp is
    for each u in U do
        Pair_U[u] := NIL
    for each v in V do
        Pair_V[v] := NIL
    matching := 0
    while BFS() = true do
        for each u in U do
            if Pair_U[u] = NIL then
                if DFS(u) = true then
                    matching := matching + 1
    return matching

Execution on an example graph showing input graph and matching after intermediate iteration 1 and final iteration 2.

Dist[u] = ∞
return false

• Maximum cardinality matching, the problem solved by the algorithm, and its generalization to non-bipartite graphs
• Assignment problem, a generalization of this problem on weighted graphs, solved e.g. by the Hungarian algorithm
• Edmonds–Karp algorithm for finding maximum flow, a generalization of the Hopcroft–Karp algorithm