(Hydroxyethyl)methacrylate

Hydroxyethylmethacrylate (also known as glycol methacrylate)[3][4] is the organic compound with the chemical formula H2C\dC(CH3)CO2CH2CH2OH. It is a colorless viscous liquid that readily polymerizes. Hydroxyethylmethacrylate is a monomer that is used to make various polymers.

(Hydroxyethyl)methacrylate
Skeletal formula of Hydroxyethyl methacrylate
Ball-and-stick model of the hydroxyethyl methacrylate molecule
Names
Preferred IUPAC name
2-Hydroxyethyl 2-methylprop-2-enoate
Other names
HEMA; hydroxyethylmethacrylate; glycol methacrylate; glycol monomethacrylate; hydroxyethyl methacrylate; ethylene glycol methacrylate; 2-(methacryloyloxy)ethanol
Identifiers
3D model (JSmol)
1071583
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.011.621
EC Number
  • 212-782-2
936557
KEGG
RTECS number
  • OZ4725000
UNII
  • InChI=1S/C6H10O3/c1-5(2)6(8)9-4-3-7/h7H,1,3-4H2,2H3 checkY
    Key: WOBHKFSMXKNTIM-UHFFFAOYSA-N checkY
  • InChI=1/C6H10O3/c1-5(2)6(8)9-4-3-7/h7H,1,3-4H2,2H3
    Key: WOBHKFSMXKNTIM-UHFFFAOYAH
  • O=C(OCCO)\C(=C)C
  • CC(=C)C(=O)OCCO
Properties
C6H10O3
Molar mass 130.143 g·mol−1
Appearance Colourless liquid
Density 1.07 g/cm3
Melting point −99 °C (−146 °F; 174 K)[1]
Boiling point 213 °C (415 °F; 486 K)[1]
miscible
log P 0.50[2]
Vapor pressure 0.08 hPa
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
Eye irritation
GHS labelling:
GHS07: Exclamation mark
Warning
H315, H317, H319
P261, P264, P272, P280, P302+P352, P305+P351+P338, P321, P332+P313, P333+P313, P337+P313, P362, P363, P501
Flash point 97 °C (207 °F; 370 K)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)
Infobox references

Synthesis

Hydroxyethylmethacrylate was first synthesized around 1925. Common methods of synthesis are:[5]

Both these methods give also some amount of ethylene glycol dimethacrylate. During polymerization of hydroxyethylmethacrylate, it works as crosslinking agent.[5]

Properties

Hydroxyethylmethacrylate is completely miscible with water and ethanol, but its polymer is practically insoluble in common solvents. Its viscosity is 0.0701 Pa⋅s at 20°C[6] and 0.005 Pa⋅s at 30°C.[3] During polymerization, it shrinks by approximately 6%.[6]

Applications

Contact lenses

In 1960, O. Wichterle and D. Lím[7] described its use in synthesis of hydrophilic crosslinked networks, and these results had great importance for manufacture of soft contact lenses.[5] Polyhydroxyethylmethacrylate is hydrophilic: it is capable of absorbing from 10 to 600% water relative to the dry weight. Because of this property, it was one of the first materials to be used in the manufacture of soft contact lenses.[8]

Use in 3D printing

Hydroxyethylmethacrylate lends itself well to applications in 3D printing as it cures quickly at room temperature when exposed to UV light in the presence of photoinitiators. It may be used as a monomeric matrix in which 40nm silica particles are suspended for 3D glass printing.[9] When combined with a suitable blowing agent such as BOC anhydride it forms a foaming resin which expands when heated.[10]

Other

In electron microscopy, later in light microscopy, hydroxyethylmethacrylate serves as an embedding medium.[4][3]

When treated with polyisocyanates, polyhydroxyethylmethacrylate makes a crosslinked polymer, an acrylic resin, that is a useful component in some paints.[11]

Hazards

Hydroxyethylmethacrylate is a mild skin irritant and can cause allergic skin reactions.[3]

References

  1. "GPS Safety Summary 2-Hydroxyethyl methacrylate (HEMA)". July 2013.
  2. "2-hydroxyethyl methacrylate_msds". ChemSrc: A Smart Chem-Search Engine.
  3. Gerrits, P. O.; Horobin, R. W. (1996). "Glycol Methacrylate Embedding for Light Microscopy: Basic Principles and Trouble-Shooting". Journal of Histotechnology. 19 (4): 297–311. doi:10.1179/his.1996.19.4.297.
  4. Cole, Madison B.; Sykes, Stephen M. (1974). "Glycol Methacrylate in Light Microscopy a Routine Method for Embedding and Sectioning Animal Tissues". Stain Technology. 49 (6): 387–400. doi:10.3109/10520297409117016. ISSN 0038-9153. PMID 4142140.
  5. Macret, M.; Hild, G. (1982). "Hydroxyalkyl methacrylates: Kinetic investigations of radical polymerizations of pure 2-hydroxyethyl methacrylate and 2, 3-dihydroxypropyl methacrylate and the radical copolymerization of their mixtures". Polymer. 23 (1): 81–90. doi:10.1016/0032-3861(82)90020-9.
  6. Rosenberg, M.; Bartl, P.; Lesko, J. (1960). "Water-soluble methacrylate as an embedding medium for the preparation of ultrathin sections". Journal of Ultrastructure Research. 4 (3–4): 298–303. doi:10.1016/s0022-5320(60)80024-x. PMID 13743397.
  7. Wichterle, O.; Lím, D. (1960). "Hydrophilic gels for biological use". Nature. 185 (4706): 117–118. Bibcode:1960Natur.185..117W. doi:10.1038/185117a0. S2CID 4211987.
  8. Blasco, Joe; Kehoe, Vincent J-R; The professional make-up artist : motion pictures, television, print, theatre; ISBN 0-9771580-0-4; LCC# PN2068.B53 2005
  9. Kotz, Frederik; Arnold, Karl; Bauer, Werner; Schild, Dieter; Keller, Nico; Sachsenheimer, Kai; Nargang, Tobias M.; Richter, Christiane; Helmer, Dorothea; Rapp, Bastian E. (2017). "Three-dimensional printing of transparent fused silica glass". Nature. 544 (7650): 337–339. doi:10.1038/nature22061. ISSN 0028-0836. PMID 28425999.
  10. Wirth, D. (2020). "Highly Expandable Foam for Lithographic 3D Printing". ACS Applied Materials and Interfaces. 12 (16): 19033–19043. doi:10.1021/acsami.0c02683. PMID 32267677. S2CID 215603770.
  11. Stoye, D.; Funke, W.; Hoppe, L.; et al. (2006). "Paints and Coatings". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a18_359.pub2.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.