IBM System/360 Model 25

The IBM System/360 Model 25 is a low-end member of the IBM System/360 family. It was announced on January 3, 1968, 3 years before the IBM System/360 Model 22,[1] as a "bridge between its old and new computing systems".[2]

IBM System/360 Model 25
IBM System/360 Model 25
ManufacturerInternational Business Machines Corporation (IBM)
Product familySystem/360
Release dateJanuary 4, 1968 (1968-01-04)
Introductory price$253,000 ($5,330/month)
(typical configuration), including at least twice the memory of the 360/30
DiscontinuedOctober 7, 1977
Memory16 - 48K Core
WebsiteOfficial website IBM Archives

History

At a time when lower priced[3] alternatives, such as service bureaus - by 1968, there were 32 such service bureaus serving the US National Institutes of Health (NIH) alone[4] - and prior generation systems, such as the Honeywell 200, a competitor to IBM's own IBM 1401, were available, this model provided a stop-gap measure.[3]

Both the Model 25 and the Model 22, which had been marketed as entry level systems,[5] were withdrawn on the same day, October 7, 1977.[6]

Models

The Model 25[7] can be configured with 16K, 24K, 32K, or 48K of core memory.[2]

Characteristics

The base Model 25 implements the System/360 standard and commercial instruction sets. The scientific or universal instruction sets are optional features.[7]:23

The Model 25 logic is built on IBM SLT modules mounted on pluggable cards, which are plugged into printed circuit boards. The boards are mounted on hinged metal gates, and are interconnected by flat cables.

The Model 25 is the first IBM system to store its microcode in a rewritable memory, called the control storage. The control storage uses an additional 16 K (16,384) bytes of core memory.[8]:1–3 There is also a small part of the core storage that is used to store the contents of registers accessible by software, as well as data used by the microcode.[8]:1–4

The Model 25 also has a 64-byte high-speed (180 ns) SLT Local Storage, used by the microcode.[8]:1–5

Standard Features

  • Commercial instruction set
  • Attachment for 1052 Printer-Keyboard Model 7

Optional Features

  • Scientific or universal instruction set
  • Byte multiplexer channel or selector channel (one of either)
  • Storage protection
  • Direct control (with external interrupt) or external interrupt (alone)
  • Timer (line-frequency type)
  • IBM 1401/1460 compatibility
  • 1401/1440/1460 DOS compatibility
  • 1440 compatibility
  • System/360 Model 20 mode[8]:6–1[9]
  • CPU-integrated attachments for:
One 1403 Prnter Model 2 or 7. After the original announcement the IBM 1403 model N1 was added.
As many as four 2311 Disk Storage Drives Model 1 (with file scan feature)
One 2540 Card Read Punch Model 1 (with column binary feature and punch feed read control)
One 2560 Multi-function Card Machine Model A1 (for Model 20 mode; also for System/360 mode [read/punch only] if the 2540 emulation feature is added[10]
CPU-integrated communications attachment
One 2314 High Speed Channel - this feature is an RPQ, and was not part of the original announcement[11]

Integrated Attachments

The Model 25 has a standard attachment for connection of a 1052 Model 7 console printer-keyboard, which is used as the operator console.[7]:26 Optionally, the Model 25 can have a standard System/360 I/O channel, that can be either a byte-multiplexor or a selector channel. For the most commonly used peripherals, such as a 2540[7]:111 or 2560 card reader-punch, a 1403 printer,[7]:39 or 2311[7]:63 or 2314 disk drives, optional internal attachments are provided. These attachments connect directly to their respective peripherals, and appear to the operating system as if the peripherals were channel-attached.

Most unusual about the 360/25 was a feature somewhat analogous to the IBM System/360 Model 44's integrated single disk storage drive, namely an integrated attachment.[7]:63

Compatibility Features

The Model 25 provides an optional compatibility feature that helps users of IBM 1400 series computers migrate to System/360. With the additional Compatibility Feature hardware and Compatibility Support software under DOS/360, the IBM 1401/1440/1460 object programs can be run in the emulation mode, with little or no reprogramming.

System configuration

The standard set of peripherals[7] is available, although by this time customers had found their way to IBM-compatible alternatives.[12][13]

A typical System/360 Model 25 configuration consists of:

  • IBM 2025 CPU
  • IBM 1052 console printer-keyboard
  • IBM 2540 card reader-punch
  • IBM 1403 printer
  • One or more IBM 2311 or IBM 2314 disk drives
  • One or more magnetic tape drives, either IBM 2415 or IBM 2401 model 1, attached to the selector channel

Software

The typical operating system for the Model 25 was DOS/360, which was loaded from disk. Less common was TOS/360, which was loaded from tape, and, rarely, BOS/360, which was loaded from punched cards. Programming was mostly in the COBOL, RPG and Assembler languages for the commercial applications that were the predominant uses of this computer, but Fortran IV and could also be used for the scientific and engineering applications, and PL/I was available.

See also

Notes

    References

    1. "IBM Archives: System/360 Model 22". IBM. 23 January 2003.
    2. "IBM Archives: System/360 Model 25". IBM. 23 January 2003.
    3. Molly Upton (September 5, 1977). "IBM Feared Competition to 360/30 CPU - IBM Planned to Counter 360/30 Competition". Computerworld. p. 40. If substantial inroads were made on the 30 base, a model 25 which had full compatibility, not just subset compatibility, with lower performance and lower price "would retain for IBM many installations exposed by price alone rather than by price/performance."
    4. Gary Myers (January 27, 2006). "Go East Young Man". "Information Technology Corporate Histories Collection". Computer History Museum. Archived from the original on June 2, 2006.
    5. Pugh, Emerson W.; Johnson, Lyle R.; Palmer, John H. (1991). IBM's 360 and Early 370 Systems. MIT Press. ISBN 0-262-16123-0.
    6. "System/360 dates and characteristics". 23 January 2003.
    7. "IBM System/360 Model 25 Functional Characteristics" (PDF). IBM. January 1968. A24-3S10-0.
    8. Field Engineering Theory of Operation, 2025 Processing Unit (PDF) (First ed.). IBM. October 1968. Y24-3527-0.
    9. IBM System/360 Model 25 Model 20 Mode Feature. IBM. GA24-3524.
    10. IBM Corporation (January 1974). IBM System/360 System Summary (PDF). p. 6-3. Retrieved Nov 20, 2019.
    11. IBM System/360 Model 25 High-Speed Channel-2314 Attachment Feature RPO E69109 (PDF) (first ed.). IBM. June 1970. GA24-3547-0.
    12. "STC Holds Lion's Share". Computerworld. August 18, 1980. p. 7.
    13. Marcia Blumenthal (July 2, 1979). "The Maverick Mainframer - Philosophical Underpinnings Distinguish CDC From Its Mainframe Competitors". Computerworld. p. 5.
    This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.