Cisco IOS XR

IOS XR is a release train of Cisco Systems' widely deployed Internetwork Operating System (IOS), used on their high-end Network Convergence System (NCS) and carrier-grade routers such as the ASR 9000 series and Carrier Routing System series of routers.

"IOX" redirects here. For the remote sensing satellite package, see Ionospheric Occultation Experiment.
Cisco IOS XR
DeveloperCisco Systems
OS familyUnix-like
Working stateCurrent
Source modelClosed source
Latest release7.5.1 / November 30, 2021 (2021-11-30)
PlatformsNCS 5x0, NCS 5x00, 8000, ASR 9000 and XRv 9000 Series Routers
UserlandLinux
Official websiteCisco IOS XR
Line card running IOS XR.

Architecture

According to Cisco's product literature, IOS XR shares very little infrastructure with the other IOS trains, and is instead built upon a "preemptive, memory protected, multitasking, microkernel-based operating system".[1] The microkernel was formerly provided by QNX;[2] versions 6.0 onwards use the Wind River Linux distribution.[3]

IOS XR aims to provide the following advantages over the earlier IOS trains:

  • Improved high availability (largely through support for hardware redundancy and fault containment methods such as protected memory spaces for individual processes and process restartability)
  • Better scalability for large hardware configurations (through a distributed software infrastructure and a two-stage forwarding architecture)
  • A package based software distribution model (allowing optional features such as multicast routing and MPLS to be installed and removed while the router is in service)
  • The ability to install package upgrades and patches (potentially while the router remains in service)
  • A web-based GUI for system management (making use of a generic, XML management interface)

History

IOS XR was announced along with the CRS-1 in May 2004.[4] The first generally available version was 2.0.

Some significant releases include the following.

  • 3.2 – first generally available version for the 12000 router series
  • 3.9 – first generally available version for the ASR 9000 router series
  • 5.0 – first generally available version for the NCS6000 series, which is based upon a Linux kernel instead of QNX, and was released in September 2013[5]
  • 6.1.1 - Introduces support for the 64-bit Linux-based IOS XR operating system on ASR 9000 series [6]

Differences between IOS and IOS XR

An example BGP configuration for IOS and IOS XR is shown.

More examples can be found in the Cisco document Converting Cisco IOS Configurations to Cisco IOS XR Configurations.[7]

IOS

router bgp 109
  no synchronization
  bgp log-neighbor-changes
  neighbor 203.0.113.1 remote-as 109
  neighbor 203.0.113.1 update-source Loopback0
  no auto-summary

IOS XR

router bgp 109
  neighbor 203.0.113.1
    remote-as 109
    update-source Loopback0

See also

References
  1. "Products & Services". Cisco.
  2. QNX press release Confirming use of their microkernel in IOS XR
  3. "Cisco IOS XR Software Release 6.0 Operational Enhancements Data Sheet". Cisco.
  4. "Cisco press release announcing CRS-1 and IOS XR". Archived from the original on March 9, 2005.
  5. "Release Notes for Cisco NCS 6000 Series Routers, Release 5.0.0". Cisco.
  6. "Release Notes for Cisco ASR 9000 Series Aggregation Services Routers, Release 6.1.2".
  7. "Converting Cisco IOS Configurations to Cisco IOS XR Configurations" (PDF). cisco.com. Cisco Systems. Retrieved August 4, 2017.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.