ITL MARS
The ITL MARS (Multi-purpose Aiming Reflex Sight) is a gun sight that combines two sighting devices, a reflex sight and a laser sight, as well as a backup iron sight. It is designed and produced by ITL Optronics company, based in Israel. The laser may be either visible or infrared and can be activated as need via a pressure switch. It has been purchased by a number of forces including the U.S. military for its M16 series weapons, Israel for its IMI Tavor TAR-21 rifle, and India (locally manufactured under license as raptor sight) for its INSAS rifle, as well as other commercial customers.
A pair of Marines scan with M16A4 rifles in Fallujah, Iraq (December 2004); the one in the foreground has an ITL MARS attached via a MIL-STD-1913 "Picatinny rail".
Optics & Sensors:
| Magnification: | 1x |
| Sight exit aperture: | 25mm |
| Reflex dot diameter: | 0.3mRad (about 1" @ 100m) |
| Parallax: | <0.2mRad at infinity |
| Light transmission: | 85% for photopic response |
| Red dot compensation: | Automatic, dynamic range = 1 |
| Dot intensity control: | OFF, HIGH, MEDIUM, LOW, VERY LOW 5 positions (NVGs) |
| Optical distortion: | 0.5o angular deviation of parallel light beams through the sight |
| Laser Pointers | ||
|---|---|---|
| Red: | 650nm, 1.0 mW, Class 2 (IEC 825-1) | |
| IR (optional): | 850nm, 0.4 mW, Class 1 (IEC 825-1)**restricted to law enforcement and military only | |
| Beam divergence: | 0.5mRad | |
| Zeroing | ||
| Adjustment: | Reflex sight and pointing lasers adjusted with one operation | |
| Physical | ||
| Weight: | 15.2oz. with battery and cable | |
| Dimensions: | 4.9in (L), 1.7in (W), 3.4in (H) | |
| Adapter: | Picatinny rail | |
| Electrical | ||
| Power Source: | Single 1.5V "AA" battery | |
| Reflex Sight operation: | 200hr continuous | |
| Laser pointer: | 10,000 operations of 5 sec each | |
| Low voltage warning: | @ 1V ±0.1V, non-interfering with sight operation | |
| Reliability | ||
| Laser switch lifetime: | Min 40,000 operations | |
| Environmental | ||
| Temperature Range: | -20 °C to +55 °C MIL STD 810F | |
| Humidity: | 95% at +70 °C | |
| Thermal shock: | -20 °C to +70 °C | |
| Immersion: | 1m, 30min. Salt fog, dust and sand | |
| Altitude: | 15,000ft-50,000ft (non-operating) | |
| Shock: | 30g for 11ms | |
See also
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.