Interrupt vector table

An interrupt vector table (IVT) is a data structure that associates a list of interrupt handlers with a list of interrupt requests in a table of interrupt vectors. Each entry of the interrupt vector table, called an interrupt vector, is the address of an interrupt handler(also known as ISR). While the concept is common across processor architectures, IVTs may be implemented in architecture-specific fashions. For example, a dispatch table is one method of implementing an interrupt vector table.

Interrupts are assigned a number between 0 to 255. The interrupt vectors for each interrupt number are stored in the lower 1024 bytes of main memory. For example, interrupt 0 is stored from 0000:0000 to 0000:0003, interrupt 1 from 0000:0004 to 0000:0007, and so on.

Interrupt List
Interrupt Number IVT Address Interrupt Name
0 00-03 CPU divide by zero
1 04-07 Debug single step
2 08-0B Non Maskable Interrupt (NMI input on processor)
3 0C-0F Debug breakpoints
4 10-13 Arithmetic overflow
5 14-17 BIOS provided Print Screen routine
6 18-1B Reserved
7 1C-1F Reserved
8 20-23 IRQ0, Time of day hardware services
9 24-27 IRQ1, Keyboard Interface
A 28-2B IRQ2, ISA Bus cascade services for second 8259
B 2C-2F IRQ3, Com 2 hardware
C 30-33 IRQ4, Com1 hardware
D 34-37 IRQ5, LPT2, Parallel port hardware (Hard Disk on XT)
E 38-3B IRQ6, Floppy Disk adaptor
F 3C-3F IRQ7, LPT1, Parallel port hardware
10 40-43 Video services, see note 1
11 44-47 Equipment check
12 48-4B Memory size determination
13 4C-4F Floppy I/O routines
14 50-53 Serial port I/O routines
15 54-57 PC used for Cassette tape services
16 58-5B Keyboard I/O routines
17 5C-5F Printer I/O routines
18 60-63 Points to basic interpreter in a "real" IBM PC
19 64-67 Bootstrap loader
1A 68-6B Time of day services
1B 6C-6F Services Ctrl-Break service
1C 70-73 Timer tick (provides 18.2 ticks per second)
1D 74-77 Video parameters
1E 78-7B Disk parameters
1F 7C-7F Video graphics
20 80-83 Program termination (obsolete)
21 84-87 All DOS services available through this Interrupt
22 88-8B Terminate address
23 8C-8F Ctrl-Break exit address
24 90-93 Critical error handler
25 94-97 Read logical sectors
26 98-9B Write logical sectors
27 9C-9F Terminate and stay resident routines (obsolete)
28 to 3F A0-A3 to FC-FF Reserved for DOS
40 to 4F 100-103 to 13C-13F Reserved for BIOS
50 140-143 Reserved for BIOS
51 144-147 Mouse functions
52 to 59 148-14B to 164-167 Reserved for BIOS
5A 168-16B Reserved for BIOS


Background

Most processors have an interrupt vector table, including chips from Intel, AMD, Infineon, Microchip[1] Atmel,[2] NXP, ARM[3][4] etc.

Interrupt handlers

Handling methods

An interrupt vector table is used in the three most popular methods of finding the starting address of the interrupt service routine:

"Predefined"

The "predefined" method loads the program counter (PC) directly with the address of some entry inside the interrupt vector table. The jump table itself contains executable code. While in principle an extremely short interrupt handler could be stored entirely inside the interrupt vector table, in practice the code at each entry is a single jump instruction that jumps to the full interrupt service routine (ISR) for that interrupt. The Intel 8080,[5] Atmel AVR[6][7] and all 8051 and Microchip microcontrollers[8] use the predefined approach.

"Fetch"

The "fetch" method loads the PC indirectly, using the address of some entry inside the interrupt vector table to pull an address out of that table, and then loading the PC with that address.[8] Each and every entry of the IVT is the address of an interrupt service routine. All Motorola/Freescale microcontrollers use the fetch method.[8]

"Interrupt acknowledge"

For the "interrupt acknowledge" method, the external device gives the CPU an interrupt handler number. The interrupt acknowledge method is used by the Intel Pentium and many older microprocessors.[8]

When the CPU is affected by an interrupt, it looks up the interrupt handler in the interrupt vector table, and transfers control to it.

See also

References

  1. "dsPIC33F Family Reference Manual" section 29.1.1 Interrupt Vector Table
  2. "AVR Libc User Manual" section: Introduction to avr-libc's interrupt handling
  3. "Documentation – Arm Developer". developer.arm.com. Retrieved 2020-07-26.
  4. "Documentation – Arm Developer – AArch64 exception vector table". developer.arm.com. Retrieved 2020-07-26.
  5. Intel 8080 Microcomputer Systems User's Manual. Intel Corporation. September 1975. pp. 2–11 Interrupt Sequences. OCLC 2058546. OL 24210843M.
  6. Roger L. Traylor. "Interrupts: AVR interrupt servicing"
  7. Gary Hill. "Atmel AVR Interrupt and Timing Subsystems: ATMEGA328P interrupt vector table"
  8. Huang, Han-Wat (2005). Pic Microcontroller: An Introduction to Software and Hardware Interfacing. Cengage Learning. p. 247. ISBN 978-1-4018-3967-3. Retrieved 22 April 2013.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.