Java Database Connectivity

Sun Microsystems released JDBC as part of Java Development Kit (JDK) 1.1 on February 19, 1997.[1] Since then it has been part of the Java Platform, Standard Edition (Java SE).

The JDBC classes are contained in the Java package java.sql and javax.sql.

Starting with version 3.1, JDBC has been developed under the Java Community Process. JSR 54 specifies JDBC 3.0 (included in J2SE 1.4), JSR 114 specifies the JDBC Rowset additions, and JSR 221 is the specification of JDBC 4.0 (included in Java SE 6).[2]

JDBC 4.1, is specified by a maintenance release 1 of JSR 221[3] and is included in Java SE 7.[4]

JDBC 4.2, is specified by a maintenance release 2 of JSR 221[5] and is included in Java SE 8.[6]

The latest version, JDBC 4.3, is specified by a maintenance release 3 of JSR 221[7] and is included in Java SE 9.[8]

Since JDBC ('Java Database Connectivity') is mostly a collection of interface definitions and specifications, it allows multiple implementations of these interfaces to exist and be used by the same application at runtime. The API provides a mechanism for dynamically loading the correct Java packages and registering them with the JDBC Driver Manager (DriverManager). DriverManager is used as a Connection factory for creating JDBC connections.

JDBC connections support creating and executing statements. JDBC connections support update statements such as SQL's CREATE, INSERT, UPDATE and DELETE, or query statements such as SELECT. Additionally, stored procedures may be invoked through a JDBC connection. JDBC represents statements using one of the following classes:

• Statement – the Statement is sent to the database server each and every time. In other words, the Statement methods are executed using SQL statements to obtain a ResultSet object containing the data.[9]
• PreparedStatement – PreparedStatement is a subinterface of the Statement interface.[9] The statement is cached and then the execution path is pre-determined on the database server, allowing it to be executed multiple times in an efficient manner.[9] PreparedStatement is used to execute pre-compiled SQL statements.[9] Running pre-compiled statements increases statement execution efficiency and performance. The PreparedStatement is often used for dynamic statement where some input parameters must be passed into the target database.[10] The

PreparedStatement allows the dynamic query to vary depending on the query parameter.[11]

• CallableStatement – CallableStatement is a subinterface of the Statement interface.[11] It is used for executing stored procedures on the database.[11][12] Both input and output parameters must be passed into the database for stored procedures.[13]

Update statements such as INSERT, UPDATE and DELETE return an update count indicating the number of rows affected in the database as an integer.[13] These statements do not return any other information.

Query statements return a JDBC row result set. The row result set is used to walk over the result set. Individual columns in a row are retrieved either by name or by column number. There may be any number of rows in the result set. The row result set has metadata that describes the names of the columns and their types.

There is an extension to the basic JDBC API in the javax.sql.

JDBC connections are often managed via a connection pool rather than obtained directly from the driver.[14]

When a Java application needs a database connection, one of the DriverManager.getConnection() methods is used to create a JDBC Connection . The URL used is dependent upon the particular database and JDBC driver. It will always begin with the "jdbc:" protocol, but the rest is up to the particular vendor.

Connection conn = DriverManager.getConnection(
     "jdbc:somejdbcvendor:other data needed by some jdbc vendor",
     "myLogin",
     "myPassword");
try {
     /* you use the connection here */
} finally {
    //It's important to close the connection when you are done with it
    try { 
        conn.close();
    } catch (Throwable e) { /* Propagate the original exception
                                instead of this one that you want just logged */ 
        logger.warn("Could not close JDBC Connection", e);
    }
}

Starting from Java SE 7 you can use Java's try-with-resources statement to simplify the above code:

try (Connection conn = DriverManager.getConnection(
     "jdbc:somejdbcvendor:other data needed by some jdbc vendor",
     "myLogin",
     "myPassword")) {
     /* you use the connection here */
}  // the VM will take care of closing the connection

Once a connection is established, a Statement can be created.

try (Statement stmt = conn.createStatement()) {
    stmt.executeUpdate("INSERT INTO MyTable(name) VALUES ('my name')");
}

Note that Connection s, Statement s, and ResultSet s often tie up operating system resources such as sockets or file descriptors. In the case of Connection s to remote database servers, further resources are tied up on the server, e.g. cursors for currently open ResultSet s. It is vital to close() any JDBC object as soon as it has played its part; garbage collection should not be relied upon. The above try-with-resources construct is a code pattern that obviates this.

Data is retrieved from the database using a database query mechanism. The example below shows creating a statement and executing a query.

try (Statement stmt = conn.createStatement();
    ResultSet rs = stmt.executeQuery("SELECT * FROM MyTable")
) {
    while (rs.next()) {
        int numColumns = rs.getMetaData().getColumnCount();
        for (int i = 1; i <= numColumns; i++) {
           // Column numbers start at 1.
           // Also, there are many methods on the result set to return
           //  the column as a particular type. Refer to the Sun documentation
           //  for the list of valid conversions.
           System.out.println( "COLUMN " + i + " = " + rs.getObject(i));
        }
    }
}

The following code is an example of a PreparedStatement query which uses conn and class from the first example:

try (PreparedStatement ps =
    conn.prepareStatement("SELECT i.*, j.* FROM Omega i, Zappa j WHERE i.name = ? AND j.num = ?")
) {
    // In the SQL statement being prepared, each question mark is a placeholder
    // that must be replaced with a value you provide through a "set" method invocation.
    // The following two method calls replace the two placeholders; the first is
    // replaced by a string value, and the second by an integer value.
    ps.setString(1, "Poor Yorick");
    ps.setInt(2, 8008);

    // The ResultSet, rs, conveys the result of executing the SQL statement.
    // Each time you call rs.next(), an internal row pointer, or cursor,
    // is advanced to the next row of the result.  The cursor initially is
    // positioned before the first row.
    try (ResultSet rs = ps.executeQuery()) {
        while (rs.next()) {
            int numColumns = rs.getMetaData().getColumnCount();
            for (int i = 1; i <= numColumns; i++) {
                // Column numbers start at 1.
                // Also, there are many methods on the result set to return
                // the column as a particular type. Refer to the Sun documentation
                // for the list of valid conversions.
                System.out.println("COLUMN " + i + " = " + rs.getObject(i));
            } // for
        } // while
    } // try
} // try

If a database operation fails, JDBC raises an SQLException. There is typically very little one can do to recover from such an error, apart from logging it with as much detail as possible. It is recommended that the SQLException be translated into an application domain exception (an unchecked one) that eventually results in a transaction rollback and a notification to the user.

The following code is an example of a database transaction:

boolean autoCommitDefault = conn.getAutoCommit();
try {
    conn.setAutoCommit(false);

    /* You execute statements against conn here transactionally */

    conn.commit();
} catch (Throwable e) {
    try { conn.rollback(); } catch (Throwable e) { logger.warn("Could not rollback transaction", e); }
    throw e;
} finally {
    try { conn.setAutoCommit(autoCommitDefault); } catch (Throwable e) { logger.warn("Could not restore AutoCommit setting",e); }
}

For an example of a CallableStatement (to call stored procedures in the database), see the JDBC API Guide documentation.

import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.Statement;

public class Mydb1 {
   static String URL = "jdbc:mysql://localhost/mydb";

   public static void main(String[] args) {
      try {
        Class.forName("com.mysql.jdbc.Driver");

        Connection conn = DriverManager.getConnection(URL, "root", "root");
        Statement stmt = conn.createStatement();
      
        String sql = "INSERT INTO emp1 VALUES ('pctb5361', 'kiril', 'john', 968666668)";
        stmt.executeUpdate(sql);
           
        System.out.println("Inserted records into the table...");
      } catch (Exception e) {
        e.printStackTrace();
      }
   }
}

JDBC drivers are client-side adapters (installed on the client machine, not on the server) that convert requests from Java programs to a protocol that the DBMS can understand.

• GNU Data Access (GDA)
• JDBCFacade
• Open Database Connectivity (ODBC)
• Object–relational mapping (ORM)

• Bai, Ying (2022). SQL Server Database Programming with Java. Cham: Springer International Publishing. doi:10.1007/978-3-031-06553-8. ISBN 978-3-030-92686-1.
• Horstmann, Cay (April 15, 2022). Core Java. Oracle Press Java. ISBN 0-13-787107-4.

Wikimedia Commons has media related to JDBC.

Wikibooks has a book on the topic of: Java Programming/Database Programming

• JDBC API Guide
• java.sql API Javadoc documentation
• javax.sql API Javadoc documentation
• O/R Broker Scala JDBC framework
• SqlTool Open source, command-line, generic JDBC client utility. Works with any JDBC-supporting database.
• JDBC URL Strings and related information of All Databases.