Lebanese loop

A Lebanese loop device viewed from the back: a loop of plastic holds the card in place while allowing it to be read by the ATM. Double-sided tape (yellow) holds the device in place over the ATM's card slot.

The term “Lebanese loop” is applied to any number of similar devices that are used to perpetrate ATM fraud by retaining the user's card. In their simplest form, Lebanese loops consist of a strip or sleeve of metal or plastic (even something as simple as a strip of video cassette tape) that is inserted into the ATM's card slot. Some loops have a covering fascia which appears superficially to be part of the ATM, while others are simply a length of dark-coloured tape with glue strips to hold it temporarily inside an ATM slot.[6] Lebanese Loop devices are relatively simple to construct, requiring less technical skill than a card skimming technique.

When the victim inserts their ATM card, the loop is long and narrow enough that the ATM machinery can still fully draw the card in and read it. The victim then enters their personal identification number (PIN) as normal, and requests the funds. The ATM then tries to eject the card, the loop device prevents the card from being ejected, either with a flap covering the fascia's slot, or a diagonal slit in the tape which catches against the card.[6] The machine senses that the card has not been ejected, and draws the card back into the machine. The cash drawer does not open, and the money that has been counted is retained by the machine. In most cases, the victim's account is not debited. The victim believes the machine has malfunctioned or genuinely retained their card.[7]

In a typical scam, the perpetrator will obtain the victim's PIN either by watching them enter it the first time (shoulder surfing), or by approaching the victim under the pretense of offering help and suggesting they re-enter their PIN (and again, watching them do so). More sophisticated variants of the Lebanese loop scam have developed. In some cases, the fraudsters attach a small camera to the ATM to record the victim entering their PIN. The video from this camera is then transmitted to the fraudsters, who may be waiting near the machine and viewing the video on a laptop computer,[2] meaning they need not approach the victim directly. There have been cases where a fake keypad is fitted to the machine over the top of the real one, and this records the PINs entered.[7]

Once the victim has left the area, the perpetrator retrieves the loop and the trapped card, and uses it, along with the stolen PIN, to withdraw cash from the victim's account.[8]

Since the Lebanese Loop is only able to capture one card at a time and the card holder will usually react quickly to the loss of the card, the technique must be widely deployed to net a useful number of cards in a short amount of time. This may require a large workforce to accomplish the task.

ATM manufacturers have resorted to several methods to counteract the Lebanese Loop, generally consisting of adding various sensing mechanisms to the card readers. Various network activity profiling processes can be applied to attempt to detect this activity.[9] Often ATM vestibules have video surveillance equipment installed in them, which can make identification of the perpetrator and method easier.[10]

ATM industry groups counsel cardholders to take precautions when entering their PIN into any device.[11] Customers are also advised to avoid an ATM if strangers are standing next to it (especially if they do not move after being asked), be careful of ATMs which appear out of the ordinary (such as having unusual instructions attached), to never enter a PIN more than twice (to prevent the card from being retained by the machine), and to ignore advice from "helpful" strangers who may approach when they see a customer is having difficulty.[12]

Other variants of fraud may use a “skimming” technique, where an electronic device is fitted over the ATM's card slot and which reads the information encoded into the magnetic strip on the back of the victim's card as it is inserted. This variant does not require the card to be retained; the transaction runs normally, and the data recorded from the original card is copied to another blank magnetic stripe card, which is then used to withdraw cash.

At their most sophisticated, scams can involve the construction and installation of fake fascias built to fit particular ATMs or other card reading devices. These false fronts can house any of the above devices to gather data from the user and allow the perpetrators to acquire or clone cards and their associated PINs. These fakes can often be indistinguishable from unmodified devices to the untrained eye.

• Credit card fraud
• EMV

• SS Richard Montgomery Matter: How Lebanese Loops Work